Details, datasheet, quote on part number: TFS80F
PartTFS80F
CategoryTiming Circuits => SAW Devices (Surface Acoustic Wave)
TitleSAW Devices (Surface Acoustic Wave)
DescriptionApplication = Wireless Communication ;; Center Frequency = 80.00 MHZ ;; 3 DB = 8.7 MHZ ;; Pass Band Ripple =   ;; Insertion Loss = 24.0dB ;; Group Delay Ripple = 150ns ;; Package = 13 MM X 6 MM LCC
CompanyVectron International
DatasheetDownload TFS80F datasheet
  

 

Features, Applications

Ambient temperature: Input power level: Terminating impedances Input: Output: 0 °C dBm

Reference level for the relative attenuation arel of the TFS 80F is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo.

21,7 dB max. ae = amin Insertion loss Bandwidth dB 8,18 MHz min. 8,0 MHz dB 8,65 MHz min. 8,5 MHz dB 9,72 MHz max. 10 MHz 80,0 MHz fN Nominal frequency Relative attenuation arel fN............................. ± 3,95 MHz 3,95 MHz... ± 4,1 MHz fN ± max. 3 dB

± 5,05 MHz... ± 5,5 MHz 21 dB min. dB 5,5 MHz 43 dB min. ± 5,5 MHz... ± 50 MHz 45 dB min. fN ± Group delay ripple - 4 MHz... + 4 MHz 75 ns max. 150 ns Input power level max. + 10 dBm Operating temperature range - 25 °C... 75 °C Storage temperature range - 30 °C... - 18 ppm/K TC Temperature coefficient

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Ground Output RF Return Ground Input RF Return Year+week 1999 2000

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Damp heat: (cycle) 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC to 500 Hz, or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC / 95% r.H. / 10 cycles DIN IEC Db max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on sheet 4;

Tape & Reel: DIN IEC - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer 1700 min 300 mm min 500 mm min 300 mm

Reel (all dimensions in mm): W1 W2 (max) : N (min) C

The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape.

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.


 

Some Part number from the same manufacture Vectron International
TFS82A Application = Gsm,dcs,pcs ;; Center Frequency = 82.8 MHZ ;; 3 DB = 24 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 4.0dB ;; Group Delay Ripple = 10µs ;; Package = 13 MM X 6 MM LCC
TFS82B Application = Bandselective Repeater, Cellular ;; Center Frequency = 82.0 MHZ ;; 3 DB = 7.2 MHZ ;; Pass Band Ripple =   ;; Insertion Loss = 31.0dB ;; Group Delay Ripple =   ;; Package = 35 MM X 12 MM Dip
TFS86 Application = Amps ;; Center Frequency = 86.85 MHZ ;; 3 DB = 30 KHZ ;; Pass Band Ripple = 1.5dB ;; Insertion Loss = 4.0dB ;; Group Delay Ripple = 10µs ;; Package = 13 MM X 6 MM LCC
TFS86A
TFS86A-1
TFS87 Application = Base Station ;; Center Frequency = 87.1 MHZ ;; 3 DB = 2.4 MHZ ;; Pass Band Ripple = 1.0dB ;; Insertion Loss = 25.0dB ;; Group Delay Ripple = 150ns ;; Package = 35 MM X 20 MM Dip
TM-055 Frequency Range = 1.544 MHZ - 777.6 MHZ ;; Output = TTL / Pecl ;; Package (mm) = 50.8 X 50.8 X 14.86 ;; Features = DDS Based
TO-300 Frequency Range = 1.0MHz - 40MHz ;; Output Logic = LV - Hcmos Siave ;; Package = 4 Pin Dip ;; Features = Voltage Tune, Hermetic Seal, +3.3 Vdc, High Stability
TRU-050 Frequency Range = 1MHz - 65MHz ;; Output = TTL / CMOS ;; Package (mm) = 20.3 X 7.9 ;; Features = Loop Filter Software Loss of Signal Alarm

M55310/16-B04B : 16kHz - 60MHz Crystal Oscillator

M55310/26-C03C : 25MHz - 65MHz Crystal Oscillator

VC-401-JEC-405H : Frequency Range = 10MHz - 170MHz ;; Output = Ecl / Pecl ;; Package (mm) = Single Dip, Gull Wing or True Surface Mount FR4 ;; Features = 155.52 MHZ Prototypes Available in 2 Weeks

VCA3-E3D : 0.8" X 0.5" X 0.4" 14 Pin Dip

VXB2-3B2 : Crystal Oscillators HC-49/U 4.4 MM Tall SM

OC-290-CGF-507NA-10.0 : Oven Controlled Crystal Oscillators

VCA3-C3G-25M00 : 3.3, 5.0 volt CMOS Oscillator

TRU050-GCCHA-1M0000000 : Complete VCXO Based Phase-locked Loop

OC-260-CJB-107CA-20 : Oven Controlled Crystal Oscillators

Same catergory

CLV0925E : Package Style = MINI-14S ;; Frequency (MHz) = 896 to 959 ;; N@10KHz (dBc/Hz) = -114 ;; Tuning Voltage (Vdc) = 0.30 to 4.70 ;; Tuning Sensitivity (MHz/V) = 22 ;; Power (dBm) = -5.00 ± 2.00 ;; Op.temp ( C) = -30 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 12.

CY28419 : Clock Synthesizer With Differential SRC And Cpu Outputs CK409B-compliant Supports Intel Pentium. 4-type Cpus Selectable Cpu Frequencies 3.3V Power Supply Ten Copies of Pci Clocks Two Copies 48-mHz Clock Five Copies of 3V66 With One Optional VCH Four Differential Cpu Clock Pairs One Differential SRC Clock I2C Support With Readback Capabilities Ideal.

DDU8C3 : Fixed 5-tap Lvcmos Delay Line. Five equally spaced outputs Fits standard 8-pin DIP socket Low profile Auto-insertable Input & outputs fully CMOS interfaced & buffered T L fan-out capability The DDU8C3-series device a 5-tap digitally buffered delay line. The IN Signal Input signal input (IN) is reproduced at the outputs (T1-T5), shifted in time an T1-T5 Tap Outputs amount determined.

ICS87946I-147 : Dividers. Lowskew Divide-by-2 Clock Generator. Pin Compatible With MPC946. Industrialtemperature. Improved Performance..

MXF45-7.5BF-BT6 : Frequency: 45 MHZ.

PI6C1201 : Clock Circuits. Precision Clock Generator For Laser Printers. Supports laser printer pixel rates to 40 MHz. 70 MHz for C speed version. Jitter less than 300ps. Easily programmable frequency selections via parallel interface. Post divider (R) designed to load only during the Beam Detect interval. Source clock input can be from crystal or oscillator. Source clock rates from 8 MHz to 22 MHz (from crystal or oscillator).

PI6C2502A : 80 To134 Mhz, 1 Output Zero-delay Clock Driver With Feedback Output. High-Performance Phase-Locked-Loop Clock Distribution for Networking, Synchronous DRAM modules for server/workstation/ PC applications Allows Clock Input to have Spread Spectrum modulation for EMI reduction Zero Input-to-Output delay Low jitter: Cycle-to-Cycle jitter ±75ps max. On-chip series damping resistor at clock output drivers for low noise and EMI reduction.

PLL250-1960 : High Performance Signal Source. Model: PLL250-1960 Rev: B Date: 6/4/2003 Customer: VARI-L COMPANY Operating Temperature Range: AppNote: 113 Option ° C) Parameter Frequency Range Step Size Settling Time - to within 5 deg. Output Power: RF Switch ON RF Switch OFF Output Phase Noise: 1 kHz 100 kHz 200 kHz 400 kHz 1800 kHz 6000 kHz Power Supply: VCC 1: VCO, PLL CP VCC 2: Amp VCC 3: PLL IC,Switch.

SY58016L : Receiver/Buffer/Driver. 3.3V 10Gbps Differential CML Line Driver/receiver W/internal Termination.

TFS87 : SAW Devices (Surface Acoustic Wave). Application = Base Station ;; Center Frequency = 87.1 MHZ ;; 3 DB = 2.4 MHZ ;; Pass Band Ripple = 1.0dB ;; Insertion Loss = 25.0dB ;; Group Delay Ripple = 150ns ;; Package = 35 MM X 20 MM Dip.

VCD2 : 14.4 X 9.6 X 5.5 MM 4 Pad SMD. 620 North Lindenwood Drive Olathe, KS 66062 USA Tel: 913-829-1777 Fax: 913-829-9350 Package Option Frequency Range Supply Voltage: = No Tri-state 60/40 Symmetry 1 = Tristate 60/40 Symmetry = No Tristate 55/45 Symmetry 3 = Tristate 55/45 Symmetry 5 = Enable Option 60/40 Symmetry 6 = Enable Option 55/45 Symmetry = ±100 PPM = ±50 PPM = ±100 PPM = ±50 PPM = ±25 PPM 10 ms Maximum.

ICS181-01 : Low EMI Single-Output Clock The ICS181-01 generates a low EMI output clock from a clock or crystal input. The device uses ICS’ proprietary mix of analog and digital Phase-Locked Loop (PLL) technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB. The ICS181-01 offers down spread selection.

VTA7 : Temperature Compensated Crystal Oscillators - TCXO Vectron’s VTC4 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, temperature compensated oscillator, operating off either 2.8, 3.0, 3.3 or 5.0 volt supply..

ZL30110 : The ZL30110 clock rate conversion digital phase-locked loop (DPLL) provides accurate and reliable frequency conversion. The ZL30110 generates a range of clocks that are either locked to the input reference or locked to the external crystal or oscillator. In the locked mode, the reference input is continuously monitored for a failure condition. In the event.

 
0-C     D-L     M-R     S-Z