Details, datasheet, quote on part number: TFS80A
PartTFS80A
CategoryTiming Circuits => SAW Devices (Surface Acoustic Wave)
TitleSAW Devices (Surface Acoustic Wave)
DescriptionApplication = Mobile Communication Systems ;; Center Frequency = 80.0 MHZ ;; 3 DB = 200 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 16.5dB ;; Group Delay Ripple = 600ns ;; Package = 35 MM X 12 MM Dip
CompanyVectron International
DatasheetDownload TFS80A datasheet
  

 

Features, Applications

Ambient temperature: 23 °C Input power level: 0 dBm Termination impedance: Input: 18 pF Output: 13 pF

Reference level for the relative attenuation arel of the TFS A is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fo is the arithmetic mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 80,0 MHz without tolerance. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo

max. dB ae Insertion loss (Reference level) 80,0 MHz fN Nominal frequency Pass band - 100 kHz... + 100 kHz Relative attenuation

GD Group delay Absolute delay - 100 kHz... + 100 kHz 4,55 µs max 4,85 µs Ripple - 100 kHz... + 100 kHz max ns Z Impedance Source impedance 18 pF Load impedance 13 pF

- 0,045 ppm/K² TCf Temperature coefficient of frequency 23 °C Frequency inversion temperature To Operating temperature range - 20 °C... 85 °C Storage temperature range - 40 °C... 12 V Permissible DC voltage VDC 10 V Permissible AC voltage Vpp f(Hz) = TCf(ppm/K²) x (T)² x fTo(MHz)

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Name: Temperature: Time: pre-heating periods °C 60 sec. - 90 sec. main-heating periods over °C 20 sec. - 25 sec. peak temperature 5 °C

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.


 

Some Part number from the same manufacture Vectron International
TFS80B Application = Mobile Communication Systems ;; Center Frequency = 80.0 MHZ ;; 3 DB = 200 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 6.5dB ;; Group Delay Ripple = 200ns ;; Package = 21 MM
TFS80D Application = Wireless Communication ;; Center Frequency = 80.07 MHZ ;; 3 DB = 180 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 16.0dB ;; Group Delay Ripple = 600ns ;; Package = 38 MM X 25 MM Dip
TFS80D-1 Application = Mobile Communication Systems ;; Center Frequency = 80.07 MHZ ;; 3 DB = 180 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 16.0dB ;; Group Delay Ripple = 700ns ;; Package = 38 MM X 25 MM Dip
TFS80D-2
TFS80F Application = Wireless Communication ;; Center Frequency = 80.00 MHZ ;; 3 DB = 8.7 MHZ ;; Pass Band Ripple =   ;; Insertion Loss = 24.0dB ;; Group Delay Ripple = 150ns ;; Package = 13 MM X 6 MM LCC
TFS82A Application = Gsm,dcs,pcs ;; Center Frequency = 82.8 MHZ ;; 3 DB = 24 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 4.0dB ;; Group Delay Ripple = 10µs ;; Package = 13 MM X 6 MM LCC
TFS82B Application = Bandselective Repeater, Cellular ;; Center Frequency = 82.0 MHZ ;; 3 DB = 7.2 MHZ ;; Pass Band Ripple =   ;; Insertion Loss = 31.0dB ;; Group Delay Ripple =   ;; Package = 35 MM X 12 MM Dip
TFS86 Application = Amps ;; Center Frequency = 86.85 MHZ ;; 3 DB = 30 KHZ ;; Pass Band Ripple = 1.5dB ;; Insertion Loss = 4.0dB ;; Group Delay Ripple = 10µs ;; Package = 13 MM X 6 MM LCC
TFS86A
TFS86A-1
TFS87 Application = Base Station ;; Center Frequency = 87.1 MHZ ;; 3 DB = 2.4 MHZ ;; Pass Band Ripple = 1.0dB ;; Insertion Loss = 25.0dB ;; Group Delay Ripple = 150ns ;; Package = 35 MM X 20 MM Dip
TM-055 Frequency Range = 1.544 MHZ - 777.6 MHZ ;; Output = TTL / Pecl ;; Package (mm) = 50.8 X 50.8 X 14.86 ;; Features = DDS Based
TO-300 Frequency Range = 1.0MHz - 40MHz ;; Output Logic = LV - Hcmos Siave ;; Package = 4 Pin Dip ;; Features = Voltage Tune, Hermetic Seal, +3.3 Vdc, High Stability
TRU-050 Frequency Range = 1MHz - 65MHz ;; Output = TTL / CMOS ;; Package (mm) = 20.3 X 7.9 ;; Features = Loop Filter Software Loss of Signal Alarm

VCOH-035A-175M0 :

OC-290-CAF-507NA-10.0 : Oven Controlled Crystal Oscillators

VS-720-LPD-NAA-693.4830 : Voltage Controlled SAW Oscillator

FX-104-CFC-D1L9 : Frequency Translator

FX-104-CFC-D2E7 : Frequency Translator

FX-104-CFF-A2M6 : Frequency Translator

FX-104-DFF-D418 : Frequency Translator

VC-710-DFC-GFL-155.520 : Voltage Controlled Crystal Oscillator

EX-381-DAF-147-F-10.000 : 4 Pin DIP & SMD Evacuated Miniature Crystal Oscillator

VTC3-J0CC-1M00 : Voltage Controlled Temperature Compensated Crystal Oscillator

VTC3-J23B-1M00 : Voltage Controlled Temperature Compensated Crystal Oscillator

Same catergory

CY26187SC-2 : Telecom Equipment Clock. Integrated phase-locked loop Low skew, low jitter, high accuracy outputs 3.3V Operation Broadcom Reference Design BCM5680_5404 Benefits Highest Performance PLL tailored for multimedia applications Meets critical timing requirements in complex system designs Reference Crystal Input Analog Voltage Supply Output enable (0-off; 1-on) Ground Voltage Supply.

DS1395 : Clock Circuits. RAMified Real Time Clock. Ideal for EISA bus PCs Functionally compatible with in 32 KHz Totally nonvolatile with over 10 years of operation in date, month, and year with leap year compensation DS1395S 28-Pin SOIC (330 mil) X2 X1 STBY D6 D7 VSS A2 A3 VDD SQW A4 A5 VBAT IRQ RESET RD BGND WR XRAM RTC or 24-hour clock with AM and in 12-hour mode Daylight Savings Time option Interfaced.

FXO-62F : Crystal Oscillators. Frequency: 832 MHZ. ¡Ultra-thin,thickness (5×3.2×1.2mm). ¡It is a compact and thin ceramic package with a matalized lead for surface mounting that is able to be automatically loaded. ¡Reflow soldering is possible. ¡CMOS, TTL IC direct drive is possible. Depending upon the frequency band, there is also a crystal oscillator with a CMOS-IC with a tri-state function built.

K1601TE : TCXO/TCVCXO. Package = 14 Pin Dip ;; Frequency = 2.000 to 30.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt.

MK2720S : Lowcost Vcxo. The is a low cost, low jitter, high performance VCXO and PLL clock synthesizer designed to replace expensive or 54MHz VCXOs. The patented on-chip Voltage Controlled Crystal Oscillator accepts to 3V input voltage to cause the output clocks to vary by ±100 ppm. Using our patented VCXO and analog Phase-Locked Loop (PLL) techniques, the device uses an inexpensive.

MK3732-15 : Low Phase Noise Vcxo + Multiplier. Packaged in 16 pin TSSOP Ideal for ADI's ADSL chipsets For MPEG 2 decoders Can replace a VCXO and crystal/oscillator Uses an inexpensive pullable crystal On-chip patented VCXO with pull range of 200 ppm (±100 ppm) minimum VCXO tuning voltage 3.3 V Zero ppm synthesis error in all clocks Full CMOS output swings with 12 mA output drive capability at TTL levels.

MXF45-7.5BF-BT6 : Frequency: 45 MHZ.

PCK2510S : CPU/Memory Specific. 50-150 MHZ 1:10 Sdram Clock Driver. Product Supersedes data of 1999 Dec ICL03 PC Motherboard ICs; Logic Products Group 2001 Feb 02 applications independent of the duty cycle at CLK. All outputs can be enabled or disabled via a single output enable input. When the G input is high, the outputs switch in phase and frequency with CLK; when the G input is low, the outputs are disabled to the logic-low.

PDU15F : 5-bit Programmable Delay Line. Digitally programmable in 32 delay steps Monotonic delay-versus-address variation Two separate outputs: inverting & non-inverting Precise and stable delays Input & outputs fully TTL interfaced & buffered 10 T2L fan-out capability Fits standard 24-pin DIP socket Auto-insertable The PDU15F-series device a 5-bit digitally programmable delay line. The delay,.

PI6C1201 : Clock Circuits. Precision Clock Generator For Laser Printers. Supports laser printer pixel rates to 40 MHz. 70 MHz for C speed version. Jitter less than 300ps. Easily programmable frequency selections via parallel interface. Post divider (R) designed to load only during the Beam Detect interval. Source clock input can be from crystal or oscillator. Source clock rates from 8 MHz to 22 MHz (from crystal or oscillator).

RO2118A : SAW Resonators. Frequency = 318.0 ;; = Resonator. Ideal for 318 MHz Transmitters Very Low Series Resistance Quartz Stability Surface-Mount, Ceramic Case with 21 mm2 Footprint The is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters operating at 318 MHz. This.

SY02-HPLL : Synchronization Modules. SYNCHRONOUS EQUIPMENT LOW INPUT/ HIGH OUTPUT FREQUENCY CLOCK/SYNCHRONIZER - SY02-HPLL The is a high frequency crystal-based PLL synchronizer designed as a module level subsystem for easy incorporation into telecommunication equipment. Low jitter output from intrinsically low jitter VCXO or VCSO; Two references inputs from to 77.76MHz; (see table on pg. 3) One high.

TFS341B : SAW Devices (Surface Acoustic Wave). Application = GSM Base Station ;; Center Frequency = 341.0 MHZ ;; 3 DB = 400 KHZ * ;; Pass Band Ripple =   ;; Insertion Loss = 8.5dB ;; Group Delay Ripple = 50ns ;; Package = 7 MM X 5 MM LCC.

TFS471 : SAW Devices (Surface Acoustic Wave). Application = Wireless Communication ;; Center Frequency = 471.55 MHZ ;; 3 DB = 280 KHZ ** ;; Pass Band Ripple =   ;; Insertion Loss = 5.0dB ;; Group Delay Ripple =   ;; Package = F11.

V610ME03 : Package Style = MINI-14H ;; Frequency (MHz) = 1900 to 2140 ;; N@10KHz (dBc/Hz) = -97 ;; Tuning Voltage (Vdc) = 1.00 to 8.00 ;; Tuning Sensitivity (MHz/V) = 60 ;; Power (dBm) = 10.00 ± 2.00 ;; Op.temp ( C) = -40 to 75 ;; VCC (Vdc) = 9.00 ;; Icc (mA) = 31.

VCA3 : 0.8" X 0.5" X 0.4" 14 Pin Dip. or 5.0 Vdc Option Low Cost to 160 MHz Enable Disable Option TTL/CMOS Compatible 32.768 KHz to 160 MHz 80 MHz to 160 MHz uses a low jitter internal (<50 ps) multiplier IC which will also affect phase noise performance. Standard Frequencies Package Option Voltage Options = No Tristate 60/40 Symmetry 1 = Tristate 60/40 Symmetry = No Tristate 55/45 Symmetry.

VFSMC-3 : Crystal Oscillators. Low Profile (5,0mm) Industry Standard Compact Design Space Saving Cost Effective Parameter Frequency Range Frequency Tolerance Frequency Stability Operating Temperature Range Storage Temperature Range OPTIONS Shunt Capacitance (Co) Load Capacitance (CL) Drive Level Note: Please reference "Building a Part Number" on page 36 if the desired is not found.

CDCU2A877 : The CDCU2A877 is a high-performance, low-jitter, low-skew, zero-delay buffer that distributes a differential clock input pair (CK, CK) to 10 differential pairs of clock outputs (Yn, Yn) and to one differential pair of feedback clock outputs (FBOUT, FBOUT). The clock outputs are controlled by the input clocks (CK, CK), the feedback clocks (FBIN, FBIN),.

MAS9180 : Stand-alone AM Receiver IC with Differential Input for WWVB, JJY, MSF and DCF Time Code Formats.

CF5072BA : 155MHz VCXO Module IC The CF5072BA is 155MHz VCXO IC. It incorporates a 155.52MHz fundamental frequency oscillator circuit and a differential LVPECL output circuit on a single chip. The oscillator circuit characteristics opti- mized for VCXO operation, and includes a varicap connection pin. The CF5072BA can be configured with few external components,.

 
0-C     D-L     M-R     S-Z