Details, datasheet, quote on part number: TFS70G
PartTFS70G
CategoryTiming Circuits => SAW Devices (Surface Acoustic Wave)
TitleSAW Devices (Surface Acoustic Wave)
DescriptionApplication = Bandselective Repeater, Cellular ;; Center Frequency = 70.0 MHZ ;; 3 DB = 200 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 22.0dB ;; Group Delay Ripple =   ;; Package = 21 MM X 13 MM Dip
CompanyVectron International
DatasheetDownload TFS70G datasheet
  

 

Features, Applications

Ambient temperature: Input power level: Source impedance: Load impedance: °C 0 dBm 50 and test adapter 50 and test adapter

Reference level for the relative attenuation arel of the TFS G is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fo is the arithmetic mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 70,00 MHz without tolerance. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo.

dB ae Insertion loss (Reference level) 70,0 MHz fN Nominal frequency 70,0 MHz Centre frequency fo Pass band - 100 kHz... + 100 kHz Relative attenuation fN ±

± 83 MHz... ± 100 MHz min 45 dB Group delay GD Absolute delay - 65 MHz... + 75 MHz 2 µs max - 72 ppm/K² TCf Temperature coefficient of frequency -5 °C Frequency inversion temperature To Operating temperature range - 20 °C... 85 °C Storage temperature range - 40 °C... 12 V Permissible DC voltage VDC 10 V Permissible AC voltage Vpp f(Hz) = TCf(ppm/K²) x (T)² x fTo(MHz)

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information

VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road 14 513 TELTOW / Germany Hudson, 03051 / USA Tel: Fax: 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information


 

Some Part number from the same manufacture Vectron International
TFS70H Application = Digital Radio Systems ;; Center Frequency = 70.0 MHZ ;; 3 DB = 0.25 MHZ to 40 MHZ ;; Pass Band Ripple =   ;; Insertion Loss = 28.0dB ;; Group Delay Ripple =   ;; Package = 22.1mm
TFS70H-12 Application = Digital Radio Systems ;; Center Frequency = 70.0 MHZ ;; 3 DB = 8.0 MHZ ;; Pass Band Ripple = 0.8dB ;; Insertion Loss = 23.0dB ;; Group Delay Ripple = 90ns ;; Package = 22 MM X 13 MM Dip
TFS70H-12A
TFS70H-24 Application = Wireless Communication ;; Center Frequency = 70 MHZ ;; 3 DB = 1 MHZ ;; Pass Band Ripple = 0.5 DB ;; Insertion Loss = 24 DB ;; Group Delay Ripple = 150ns ;; Package = 27 MM X 13 MM Dip
TFS70L Application = Wireless Communication ;; Center Frequency = 70.0 MHZ ;; 3 DB = 7.8 MHZ * ;; Pass Band Ripple = 1.0dB ;; Insertion Loss = 27.0dB ;; Group Delay Ripple = 100ns ;; Package = 22 MM X 13 MM Dip
TFS70L-30 Application = Wireless Communication ;; Center Frequency =  70.0 MHZ ;; 3 DB = 5.0 MHZ ;; Pass Band Ripple = 1.0dB ;; Insertion Loss = 20.0dB ;; Group Delay Ripple = 100ns ;; Package = 13 MM X 6 MM LCC
TFS70N Application = Bandselective Repeater, Cellular ;; Center Frequency = 70.0 MHZ ;; 3 DB = 10.0 MHZ ;; Pass Band Ripple = 2.0dB ;; Insertion Loss = 24.0dB ;; Group Delay Ripple = 200ns ;; Package = 35 MM X 20 MM Dip
TFS70Q
TFS70R
TFS70S
TFS70U Application = Wireless Communication ;; Center Frequency = 70.0 MHZ ;; 3 DB = 13.0 MHZ ;; Pass Band Ripple = 1.0dB  ;; Insertion Loss = 22.0dB ;; Group Delay Ripple = 30ns ;; Package = 13 MM X 6 MM LCC
TFS70V Application = Bandselective Repeater, Cellular ;; Center Frequency = 70.0 MHZ ;; 3 DB =  3.5 MHZ ;; Pass Band Ripple = 1.0dB ;; Insertion Loss = 27.0dB ;; Group Delay Ripple = 100ns ;; Package = 22 MM X 13 MM Dip
TFS71C Application = Wireless Communication ;; Center Frequency = 71.0 MHZ ;; 3 DB = 130 KHZ * ;; Pass Band Ripple =   ;; Insertion Loss = 7.6dB ;; Group Delay Ripple = 300ns ;; Package = 21 MM X 13 MM Dip
TFS71D
TFS75 Application = Wireless Communication ;; Center Frequency = 75.3 MHZ ;; 3 DB = 6.0 MHZ ;; Pass Band Ripple = 1.0dB ;; Insertion Loss = 26.0dB ;; Group Delay Ripple = 200ns ;; Package = 38 MM X 25 MM Dip
TFS80A Application = Mobile Communication Systems ;; Center Frequency = 80.0 MHZ ;; 3 DB = 200 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 16.5dB ;; Group Delay Ripple = 600ns ;; Package = 35 MM X 12 MM Dip
TFS80B
TFS80D Application = Wireless Communication ;; Center Frequency = 80.07 MHZ ;; 3 DB = 180 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 16.0dB ;; Group Delay Ripple = 600ns ;; Package = 38 MM X 25 MM Dip
TFS80D-1 Application = Mobile Communication Systems ;; Center Frequency = 80.07 MHZ ;; 3 DB = 180 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 16.0dB ;; Group Delay Ripple = 700ns ;; Package = 38 MM X 25 MM Dip
TFS80D-2
TFS80F Application = Wireless Communication ;; Center Frequency = 80.00 MHZ ;; 3 DB = 8.7 MHZ ;; Pass Band Ripple =   ;; Insertion Loss = 24.0dB ;; Group Delay Ripple = 150ns ;; Package = 13 MM X 6 MM LCC

EX-381-DHD-ST3-F : Frequency Range = 10MHz - 80MHz ;; Output Logic = Hcmos Sine (EX-385) ;; Package = 0.50" X 0.8" X 0.3" ;; Features = +3.3 VDC Low Profile Stratum 3

TC-140-BGF-4PMB : Frequency Range = 0.5MHz - 160MHz ;; Output Logic = TTL Hcmos Siave ;; Package = 38.89 X 38.89 X 13.462 ;; Features = Stratum 3 Option

VC-411-GDC-205G : Frequency Range = 10MHz - 170MHz ;; Output = Ecl / Pecl ;; Package (mm) = Single Dip, Gull Wing or True Surface Mount FR4 ;; Features = 155.52 MHZ Prototypes Available in 2 Weeks

VCA2-E6E : 0.8" X 0.5" X 0.2" 14 Pin Gull Lead SM

VCA3-B5F : 0.8" X 0.5" X 0.4" 14 Pin Dip

VXB1-1A5 : Crystal Oscillators HC-49/U 3.2 MM Tall SM

CCFGLP-25M125 : 3.3, 5.0 volt CMOS Oscillator

FX-104-CFC-A2C9 : Frequency Translator

FX-104-CFC-D42S : Frequency Translator

FX-104-CFF-D318 : Frequency Translator

FX-104-CFF-D3S8 : Frequency Translator

VC-800-LAC-GTJ-35.328 : Voltage Controlled Crystal Oscillator

Same catergory

ASM3P2579A : Clock Synthesis For Emi Reduced Frequency Generation. Generates an EMI optimized clocking signal at the output. Integrated loop filter components. Operates with 3.3V ±0.3V supply. Operating current less than 6mA. Low power CMOS design. Input frequency range: to 40MHz. Generates a 1X low EMI spread spectrum clock of the input frequency. Spread Spectrum Enable Control. Frequency deviation: ±1%. Available.

CDC305-1N : Non-PLL. ti CDC305, 1-To-8, Divide-By-2 Clock Driver With Preset And Clear.

CX-2EXT : Crystal Oscillators->Leaded Crystal. Leaded Crystal. The CX-2 quartz crystal is a high quality extensional mode resonator. The CX-2 is hermetically sealed in a rugged, miniature ceramic package, one-fourth the size of an eightpin mini-DIP. The CX-2 crystal is manufactured using the STATEK-developed photolithographic process, and was designed utilizing the experience acquired by producing millions of crystals.

CY241V08A-06 : Mpeg Clock Generator With Vcxo integrated Phase-locked Loop (PLL) Low-jitter, High-accuracy Outputs VCXO With Analog Adjust 3.3V Operation Compatible With MK3727 ( 5, 6) Application Compatibility For a Wide Variety of Designs Enables Design Compatibility Lower Drive Strength Settings (CY241V08A 06) BenefitsDigital Vcxo Control Electromagnetic Interference.

CY26210 : Telecom Equipment Clock. Integrated phase-locked loop Low jitter, high accuracy outputs 3.3V Operation Part Number CY26210 Outputs 1 Input Frequency Range or 2.048 MHz Benefits High performance PLL tailored for T1/E1 clock generation Meets critical timing requirements in complex system designs Enables application compatibility Output Frequencies 19.44 MHz Table 1. CY26210 Frequency.

ICS501 : Clock Circuits. Loco (tm) PLL Clock Multiplier. The ICS501 LOCOTM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked-Loop (PLL) techniques, the device uses a standard fundamental.

ICS671 : Zero Delay Fanout. Octal,zero Delay Buffer/multiplier. The is a low phase noise, high speed PLL based, 8 output, low skew zero delay buffer and multiplier. Based on ICS' proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides eight low skew outputs at speeds to 160 MHz at 3.3V. The part includes a bank of six outputs running at either or x4 mode, one output running at either or x4 mode,.

ICS9169C-41 : Frequency Generator For Pentiumpro(tm) Based Systems. The is a Clock Synthesize/Driver chip for Pentium, PentiumPro or Cyrix 68x86 based motherboards using SDRAM. include four dual purpose I/O pins which provide extra CPU clocks and enable the part to be packaged in a low-cost 34-pin SSOP package. These four pins latch the select inputs at the internal Power-On Reset. Additionally, the device meets the Pentium.

K1300 : Package = 14 Pin MTL Dil ;; Frequency = 70.000 to 120.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5V.

MQF21.4-3000/27 : Monolithic Crystal Filter (MCF). Pole No. = 10 ;; Loss /dB = 4.0 ;; Passband /dB = 3.0 ;; Passband /±kHz = 15.00 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 12.0 ;; Stopband /dB = 70 ;; Stopband /±kHz = 30.00 ;; Stopband /dB = 90 ;; Stopband /±kHz = 40.00 ;; Impedance R/ohm = 910 ;; Impedance C/pf = 15.00 ;; Remarks =   ;; Case.

MQF9.0-1200/04 : Monolithic Crystal Filter (MCF). Pole No. = 8 ;; Loss /dB = 3.5 ;; Passband /dB = 6.0 ;; Passband /±kHz = 6.00 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 4.0 ;; Stopband /dB = 60 ;; Stopband /±kHz = 12.00 ;; Stopband /dB = 80 ;; Stopband /±kHz = 15.00 ;; Impedance R/ohm = 1200 ;; Impedance C/pf = 30.00 ;; Remarks =   ;; Case.

MXO5163 : Package = 14 Dip ;; Frequency = 10 - 20 MHZ ;; Output Logic = Siave ;; Supply Voltage = +12 VDC ;; App Notes = -.

PLL300-1906 : High Performance Signal Source. Model: PLL300-1906 Rev: A Date: 4/17/2003 Customer: VARI-L COMPANY Operating Temperature Range: AppNote: 113 Option ° C) Parameter Frequency Range Step Size Settling Time - to within 1.0 kHz Output Power Output Phase Noise: 10 kHz 800 kHz Power Supply Current Spurious Product - 200 kHz Reference Feedthrough Harmonic Suppression: 2nd Harmonic 3rd Harmonic.

RO2112C : SAW Resonators. Frequency = 433.420 ;; = Resonator. Ideal for European 433.420 MHz Transmitters Very Low Series Resistance Quartz Stability The is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters operating at 433.420 MHz. This SAW is designed specifically for remote-control.

RO2150 : SAW Resonators. Frequency = 304.0 ;; = Resonator. Ideal for 304.0 MHz Transmitters Very Low Series Resistance Quartz Stability Rugged, Hermetic, Low-Profile TO39 Case The is a true one-port, surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency oscillators operating at 304.0 MHz. The RO2150 is designed.

TFS342 : SAW Devices (Surface Acoustic Wave). Application = Umts ;; Center Frequency = 342.5 MHZ ;; 3 DB = 25 MHZ * ;; Pass Band Ripple = 2.0dB ;; Insertion Loss = 11.0dB ;; Group Delay Ripple = 150ns ;; Package = 7 MM X 5 MM LCC.

V613ME05 : Package Style = MINI-14S ;; Frequency (MHz) = 2110 to 2170 ;; N@10KHz (dBc/Hz) = -105 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 38 ;; Power (dBm) = 0.00 ± 3.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 17.

VCO190-1068T : High Performance Signal Source. Model: VCO190-1068T Rev: A Date: 4/17/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C) Parameter Frequency Range Tuning Voltage: 1055 MHz 1080 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 7.0-7.8 V Frequency.

PI6CX230A : 3.3V VCXO and Low Noise Clock Generator for Digital Video Applications.

 
0-C     D-L     M-R     S-Z