Details, datasheet, quote on part number: SN74HC684DW
PartSN74HC684DW
CategorySemiconductors => Logic => Specialty Logic => Digital Comparator
Part familySN74HC684 8-Bit Identity/Magnitude Comparators
TitleMagnitude Comparators
Description8-Bit Identity/Magnitude Comparators 20-SOIC -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload SN74HC684DW datasheet
Cross ref.Similar parts: HD74HC684RP
Quote
Find where to buy
 
Specifications 
Output Drive (IOL/IOH)(Max)(mA)5.2/-5.2
Bits(#)8
ICC @ Nom Voltage(Max)(mA)0.08
F @ Nom Voltage(Max)(Mhz)70
Operating Temperature Range(C)-40 to 85
Technology FamilyHC
RatingCatalog
tpd @ Nom Voltage(Max)(ns)58
VCC(Max)(V)6
Approx. Price (US$)3.77 | 1ku
VCC(Min)(V)2
Package GroupPDIP,SOIC
Voltage(Nom)(V)6
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
20DWSOICR-PDSO-G25TUBEHC684 7.512.82.351.27

 

Features, Applications

Wide Operating Voltage Range 6 V High-Current Outputs Drive To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC

Typical tpd ns ±4-mA Output Drive 5 V Low Input Current 1 µA Max Compare Two 8-Bit Words

These magnitude comparators perform comparisons of two 8-bit binary or BCD words. These devices provide = Q and > Q outputs. ORDERING INFORMATION

TA PDIP to 85°C SOIC ­ DW CDIP to 125°C CFP ­ W LCCC ­ FK PACKAGE Tube Tape and reel Tube ORDERABLE PART NUMBER SNJ54HC684W SNJ54HC684FK TOP-SIDE MARKING SNJ54HC684W SNJ54HC684FK

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE DATA INPUTS P, Q P=Q P>Q P<Q OUTPUTS P=Q L H P>Q L H

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303


absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input voltage range, VI (see Note 7 V Output voltage range, VO (see Note V to VCC 0.5 V Input clamp current, IIK (VI VI > VCC). ±20 mA Output clamp current, IOK (VO VO > VCC). ±20 mA Continuous output current, IO (VO 0 to VCC). ±25 mA Continuous current through VCC or GND. ±50 mA Package thermal impedance, JA (see Note 2): DW package. 58°C/W N package. 69°C/W Storage temperature range, Tstg. to 150°C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

SN54HC684 MIN VCC VIH Supply voltage High-level input voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 2 V VIL VO tt Low-level input voltage Input voltage Output voltage Input transition (rise and fall) times VCC 2 V VCC 4.5 V VCC 6 V VCC 4.5 V VCC 6 V VCC NOM 5 MAX 6 SN74HC684 MIN VCC 400 ns NOM 5 MAX 6 UNIT V

TA Operating free-air temperature °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice.


 

Related products with the same datasheet
SN74HC684DWR
SN74HC684N
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC684DWR ti SN74HC684, 8-Bit Magnitude Comparators
SN74HC688 8-bit Identity Comparator
SN74HC688DW ti SN74HC688, 8-Bit Identity Comparators
SN74HC7001 Quad Postive-and Gate With Schmitt-trigger
SN74HC7001D ti SN74HC7001, Quadruple Positive-and Gates With Schmitt-trigger Inputs
SN74HC7002 Quad Positive-nOR GATE With Schmitt-trigger Inputs
SN74HC7002D ti SN74HC7002, Quadruple Positive-nOR GATEs With Schmitt-trigger Inputs
SN74HC7032 Quad Positive-OR GATE With Schmitt-trigger Inputs
SN74HC7032D ti SN74HC7032, Quadruple Positive-OR GATEs With Schmitt-trigger Inputs
SN74HC7074 6-section Multifunction (nand, Invert, Nor, Flip-flop) Circuits
SN74HC7074NT ti SN74HC7074, 6-Section Multifunction (NAND, Invert, Nor, Flip-Flop) Circuits
SN74HC7266 Quad 2-input Exclusive-nOR GATEs
SN74HC7266D ti SN74HC7266, Quadruple 2-Input Exclusive-nOR GATEs
SN74HC73D ti SN74HC73, Dual J-k Negative-edge-triggered Flip-flops With Clear
SN74HC73N
SN74HC74 Dual D-type Positive Edge Triggered Flip-flop With Clear
SN74HC74ADBLE ti SN74HC74, Dual D-type Positive-edge-triggered Flip-flops With Clear And Preset
SN74HC74DB Dual D-type Positive-edge-triggered Flip-flops With Clear And Preset
SN74HC74DBLE ti SN74HC74, Dual D-type Positive-edge-triggered Flip-flops With Clear And Preset
SN74HC75D ti SN74HC75, 4-Bit Bistable Latches
SN74HC75DR

5962-9564201VRA : Standard Transceivers ti SN54LVTH245A, 3.3-V Abt Octal Bus Transceivers With 3-State Outputs

PT5024A : Plug-in Power Solutions->Non-Isolated->Single Nega ti PT5024, (-)12Vout 0.5A (+)5V-Input Positive to Negative Isr

SN74LS06DR : ti SN74LS06, Hex Inverter Buffers / Drivers With High-voltage Outputs

TPS23757PW : High Efficiency PoE Interface And DC/DC Controller The TPS23757 is a combined Power over Ethernet (PoE) powered device (PD) interface and current-mode dc/dc controller optimized specifically for isolated converters. The PoE interface supports the IEEE 802.3at (draft) standard for a type 1 PD, which

SN74LS92DRE4 : Decade, Divide-by-twelve AND Binary Counters

74ABTH16245DGGRE4 : SCAN TEST Devices WITH 18-bit Universal BUS Transceivers

SN74LV86ADBRG4 : Quadruple 2-input Exclusive-or Gates

TL432IPK : Adjustable Precision Shunt Regulators

Same catergory

5962-9174601Q3A : ti SN54BCT8240A, Scan Test Devices With Octal Buffers. SN54BCT8240A, SN74BCT8240A SCAN TEST DEVICES WITH OCTAL INVERTING BUFFERS Members of the Texas Instruments SCOPE TM Family of Testability Products Octal Test-Integrated Circuits Functionally Equivalent to 'F240 and 'BCT240 in the Normal-Function Mode Compatible With the IEEE Standard 1149.1-1990 (JTAG) Test Access Port and Boundary-Scan Architecture.

74AC10 : CMOS/BiCMOS->AC/ACT Family. Triple 3-Input NAND Gate. Order Number 74ACT10SC 74ACT10PC Package Number M14A N14A Package 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150" Narrow Body 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300".

74ACT11543 : Bus Oriented Circuits. Octal Registered Transceiver With 3-state Outputs.

74F64 : Bipolar->F Family. 74F64; 4-2-3-2-input And-or-invert Gate. 14-pin plastic DIP 14-pin plastic SO COMMERCIAL RANGE VCC 5V ±10%, Tamb N74F64N N74F64D PKG. DWG. # PINS Dn Q Data inputs Data output 74F (U.L.) HIGH/LOW 1.0/1.0 50/33 LOAD VALUE HIGH/LOW 20µA/0.6mA 1.0mA/20mA NOTE: One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state. All other combinations NOTES: H = High voltage.

74F86 : 74F86; Quad 2-input Exclusive-OR GATE;; Package: SOT108-1 (SO14), SOT27-1 (DIP14).

74FCT16827T : 20-Bit Buffer. 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1µA (max.) VCC 5V ±10% High drive outputs (­32mA IOH, 64mA IOL) Power off disable outputs permit "live insertion" Typical VOLP (Output Ground Bounce) 1.0V at VCC = 25°C Available in SSOP and TSSOP packages.

CD40117B : CMOS/BiCMOS->4000 Family. Programmable Dual 4-bit Terminator. Data sheet acquired from Harris Semiconductor SCHS101A ­ Revised March 2002 The CD40117B types are supplied in 14-lead hermetic dual-in-line ceramic packages (D and F suffixes), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline package (NSR suffix), and in chip form (H suffix). .

HD74HCT620 : Octal Bus Transceivers With 3-state Outputs. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

HEF4001BF : Quadruple 2-input NOR GATE. For a complete data sheet, please also download: The IC04 LOCMOS HE4000B Logic Family s HEF, HEC The IC04 LOCMOS HE4000B Logic Package Outlines/Information HEF, HEC Product File under Integrated Circuits, IC04 January 1995 The HEF4001B provides the positive quadruple 2-input NOR function. The outputs are fully buffered for highest noise immunity and pattern.

IDT54FCT2652AT : Fast CMOS Octal Transceiver/ Registers ( 3-state ). Common : ­ Low input and output leakage 1µA (max.) ­ Extended commercial range +85°C ­ CMOS power levels ­ True TTL input and output compatibility ­ VOH = 3.3V (typ.) ­ VOL = 0.3V (typ.) ­ Meets or exceeds JEDEC standard 18 s ­ Product available in Radiation Tolerant and Radiation Enhanced versions ­ Military product compliant to MIL-STD-883, Class.

MC14013BCP : Dual D-type Flip-flop , Package: Pdip, Pins=14. The MC14013B dual type D flip­flop is constructed with MOS P­channel and N­channel enhancement mode devices in a single monolithic structure. Each flip­flop has independent Data, (D), Direct Set, (S), Direct Reset, (R), and Clock (C) inputs and complementary outputs (Q and Q). These devices may be used as shift register elements or as type T flip­flops.

MC74AC190D : Up/down Counter With Preset And Ripple Clock. Up/Down Counter with Preset and Ripple Clock The is a reversible BCD (8421) decade counter which synchronous counting and asynchronous presetting. The preset feature allows the to be used in programmable dividers. The Count Enable input, the Terminal Count output and the Ripple Clock output make possible a variety of methods of implementing multistage.

MC74VHCT132A : CMOS/BiCMOS->VHC/VHCT/74V1 Family->Low Voltage. Quad 2-input NAND Schmitt Trigger.

SN54AC373FK : Octal D-type Transparent Latches With 3-state Outputs. SN54AC373, SN74AC373 OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS 3-State Noninverting Outputs Drive Bus Lines Directly Full Parallel Access for Loading EPICt (Enhanced-Performance Implanted CMOS) 1-µm Process Package Options Include Plastic Small-Outline (DW) Shrink Small-Outline (DB) and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip.

SN74AHCT08QDRQ1 : ti SN74AHCT08Q-Q1, Automotive Catalog Quadruple 2-Input Positive-and Gates.

SN74ALS646A : Bus Oriented Circuits. Octal Bus Transceiver And Register With 3-state Outputs.

SN74LVTH573DBLE : D-Type (3-State) Latches. ti SN74LVTH573, 3.3-V Abt Octal Transparent D-type Latches With 3-State Outputs.

HMC850LC3C : 28 Gbps 1:2 Fanout Buffer W/Programmable Output Voltage The HMC850LC3C is a 1:2 Fanout Buffer designed to support data transmission rates up to 28 Gbps, and clock frequencies as high as 20 GHz. All differential inputs and outputs are DC coupled and terminated on chip with 50 Ohm resistors to the positive supply, ground. The outputs may be used in either.

 
0-C     D-L     M-R     S-Z