Details, datasheet, quote on part number: SN74HC646NT3
PartSN74HC646NT3
CategoryLogic => Transceivers => Registered Transceivers
TitleRegistered Transceivers
Descriptionti SN74HC646, Octal Bus Transceivers And Registers With 3-State Outputs
CompanyTexas Instruments, Inc.
DatasheetDownload SN74HC646NT3 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Wide Operating Voltage Range 6 V High-Current 3-State Outputs Can Drive To 15 LSTTL Loads Low Power Consumption, 80-A Max ICC Typical tpd 11 ns

6-mA Output Drive 5 V Low Input Current 1 A Max Independent Registers for A and B Buses Multiplexed Real-Time and Stored Data True Data Paths

The 'HC646 devices consist of bus-transceiver circuits with 3-state outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the or B bus is clocked into the registers on the low-to-high transition of the appropriate clock (CLKAB or CLKBA) input. Figure 1 illustrates the four fundamental bus-management functions that can be performed with the 'HC646 devices. Output-enable (OE) and direction-control (DIR) inputs control the transceiver functions. In the transceiver mode, data present at the high-impedance port may be stored in either or both registers. The select-control (SAB and SBA) inputs can multiplex stored and real-time (transparent mode) data. DIR determines which bus receives data when OE is active (low). In the isolation mode (OE high), A data may be stored in one register and /or B data may be stored in the other register. ORDERING INFORMATION

TA PDIP to 85C SOIC DW CDIP to 125C CFP W PACKAGE Tube Tape and reel Tube ORDERABLE PART NUMBER SNJ54HC646JT SNJ54HC646W TOP-SIDE MARKING SNJ54HC646JT SNJ54HC646W

LCCC FK Tube SNJ54HC646FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. When an output function is disabled, the input function is still enabled and can be used to store data. Only one of the two buses, or B, may be driven at a time.

FUNCTION TABLE INPUTS OE DIR CLKAB H or CLKBA L X SAB SBA A1 A8 Input Unspecified Input disabled Output Input DATA I/O B1 B8 Unspecified Input disabled Input Output OPERATION OR FUNCTION Store A, B unspecified Store B, A unspecified Store A and B data Isolation, hold storage Real-time B data to A bus Stored B data to A bus Real-time A data to B bus

H or Input Output Stored A data to B bus The data-output functions can be enabled or disabled by various signals at OE and DIR. Data-input functions always are enabled; i.e., data at the bus terminals is stored on every low-to-high transition of the clock inputs.

BUS B 22 SBA X REAL-TIME TRANSFER BUS A TO BUS B 1 CLKAB L 23 CLKBA X 2 SAB X H BUS B 22 SBA H X TRANSFER STORED DATA TO A AND/OR B


 

Related products with the same datasheet
SN74HC646DWR
SN74HC646NT
SN74HC646NTE4
SN74HC646DWE4
SN74HC646DWG4
SN74HC646DWRE4
SN74HC646DWRG4
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC651NT ti SN74HC651, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC652 Octal Bus Transceiver And Register With 3-state Outputs
SN74HC652DW ti SN74HC652, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC664 Octal Bus Tranceivers With Parity
SN74HC665NT ti SN74HC665, Octal Bus Transceivers With Parity
SN74HC682 8-bit Magnitude Comparator
SN74HC682DW ti SN74HC682, 8-Bit Magnitude Comparators
SN74HC684 8-bit Magnitude Comparator
SN74HC684DW ti SN74HC684, 8-Bit Magnitude Comparators
SN74HC688 8-bit Identity Comparator
SN74HC688DW ti SN74HC688, 8-Bit Identity Comparators
SN74HC7001 Quad Postive-and Gate With Schmitt-trigger
SN74HC7001D ti SN74HC7001, Quadruple Positive-and Gates With Schmitt-trigger Inputs
SN74HC7002 Quad Positive-nOR GATE With Schmitt-trigger Inputs
SN74HC7002D ti SN74HC7002, Quadruple Positive-nOR GATEs With Schmitt-trigger Inputs
SN74HC7032 Quad Positive-OR GATE With Schmitt-trigger Inputs
SN74HC7032D ti SN74HC7032, Quadruple Positive-OR GATEs With Schmitt-trigger Inputs
SN74HC7074 6-section Multifunction (nand, Invert, Nor, Flip-flop) Circuits
SN74HC7074NT ti SN74HC7074, 6-Section Multifunction (NAND, Invert, Nor, Flip-Flop) Circuits
SN74HC7266 Quad 2-input Exclusive-nOR GATEs
SN74HC7266D ti SN74HC7266, Quadruple 2-Input Exclusive-nOR GATEs

SN54195W : 4-bit Parallel-access Shift Registers

SN74ABT8646DWR : ti SN74ABT8646, Scan Test Devices With Octal Bus Transceivers And Registers

SN74AHCT1G08DBVT : Single Gates ti SN74AHCT1G08, Single 2-Input Positive-and Gate

TMS320C15FNA : TMS320 Family->TMS320C1X Fixed Point DSP ti TMS320C15, Digital Signal Processors

UC1637L : Motion/Motor Control ti UC1637, Switched Mode Controller For DC Motor Drive

TLK3138 : The TLK3138 is an eight channel serial transceiver. It is compliant with the 10Gbps Ethernet XAUI specification. The TLK3138 provides 10 Gbps high-speed bi-directional point-to-point data transmission. The primary application of this device is in backplanes and front panel connections requiring dual

74ALVC162836DGVRE4 : 16-bit 2.5-v TO 3.3-v/3.3-v TO 5-V Level-shifting Transceiver WITH 3-state Outputs

TMS4256-15SDE : 262,144-bit Dynamic Random-access Memories

TPS76827QDG4 : FAST Transient Response, 1-A Low-dropout Voltage Regulators

ADS774KEG4 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 2 Single-Ended, Unipolar; 2 Single-Ended, Bipolar Tube Analog and Digital, Dual ; IC ADC 12-BIT 117KHZ SMPL 28-DIP Specifications: Number of Bits: 12 ; Package / Case: 28-DIP (0.300", 7.62mm) ; Data Interface: Parallel ; Packaging: Tube ; Sampling Rate (Per Second): 117k ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Analog and Digital, Dual ; Number of Inputs and Type: 2 Single-Ended, Unipolar

BQ24295 : I2C Controlled 3A Single Cell USB Charger with Adjustable Voltage and 1.5A OTG The bq24295 is a highly-integrated switch-mode battery charge management and system power path management devices for 1 cell Li-Ion and Li-polymer battery in a wide range of power bank, tablet and other portable device applications. Its low impedance power path optimizes switch-mode operation eff

BQ24078EVM-015 : Power Management IC Development Tools BQ24078EVM-015 Texas Instruments bq24076EVM/bq24078EVM Evaluation Modules (EVMs) provides a convenient method for evaluating the performance of a charge management and system power solution for portable applications using the bq24076 or bq24078 products. Each of these chargers is designed to deliver up to 1.5A of

 
0-C     D-L     M-R     S-Z