Details, datasheet, quote on part number: SN74HC646DWR
PartSN74HC646DWR
CategorySemiconductors => Logic => Buffer/Driver/Transceiver => Registered Transceiver
Part familySN74HC646 Octal Bus Transceivers And Registers With 3-State Outputs
TitleRegistered Transceivers
DescriptionOctal Bus Transceivers And Registers With 3-State Outputs 24-SOIC -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload SN74HC646DWR datasheet
Quote
Find where to buy
 
Specifications 
Bits(#)8
ICC @ Nom Voltage(Max)(mA)0.08
F @ Nom Voltage(Max)(Mhz)28
Operating Temperature Range(C)-40 to 85
Technology FamilyHC
RatingCatalog
Schmitt TriggerNo
Package GroupSOIC
Output Drive (IOL/IOH)(Max)(mA)-6/6
VCC(Max)(V)6
VCC(Min)(V)2
tpd @ Nom Voltage(Max)(ns)29
Voltage(Nom)(V)6
Approx. Price (US$)0.52 | 1ku
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
24DWSOICR-PDSO-G2000LARGE T&RHC646 7.515.42.351.27

 

Features, Applications

Wide Operating Voltage Range 6 V High-Current 3-State Outputs Can Drive To 15 LSTTL Loads Low Power Consumption, 80-A Max ICC Typical tpd 11 ns

6-mA Output Drive 5 V Low Input Current 1 A Max Independent Registers for A and B Buses Multiplexed Real-Time and Stored Data True Data Paths

The 'HC646 devices consist of bus-transceiver circuits with 3-state outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the or B bus is clocked into the registers on the low-to-high transition of the appropriate clock (CLKAB or CLKBA) input. Figure 1 illustrates the four fundamental bus-management functions that can be performed with the 'HC646 devices. Output-enable (OE) and direction-control (DIR) inputs control the transceiver functions. In the transceiver mode, data present at the high-impedance port may be stored in either or both registers. The select-control (SAB and SBA) inputs can multiplex stored and real-time (transparent mode) data. DIR determines which bus receives data when OE is active (low). In the isolation mode (OE high), A data may be stored in one register and /or B data may be stored in the other register. ORDERING INFORMATION

TA PDIP to 85C SOIC DW CDIP to 125C CFP W PACKAGE Tube Tape and reel Tube ORDERABLE PART NUMBER SNJ54HC646JT SNJ54HC646W TOP-SIDE MARKING SNJ54HC646JT SNJ54HC646W

LCCC FK Tube SNJ54HC646FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. When an output function is disabled, the input function is still enabled and can be used to store data. Only one of the two buses, or B, may be driven at a time.

FUNCTION TABLE INPUTS OE DIR CLKAB H or CLKBA L X SAB SBA A1 A8 Input Unspecified Input disabled Output Input DATA I/O B1 B8 Unspecified Input disabled Input Output OPERATION OR FUNCTION Store A, B unspecified Store B, A unspecified Store A and B data Isolation, hold storage Real-time B data to A bus Stored B data to A bus Real-time A data to B bus

H or Input Output Stored A data to B bus The data-output functions can be enabled or disabled by various signals at OE and DIR. Data-input functions always are enabled; i.e., data at the bus terminals is stored on every low-to-high transition of the clock inputs.

BUS B 22 SBA X REAL-TIME TRANSFER BUS A TO BUS B 1 CLKAB L 23 CLKBA X 2 SAB X H BUS B 22 SBA H X TRANSFER STORED DATA TO A AND/OR B


 

Related products with the same datasheet
SN74HC646NT
SN74HC646NT3
SN74HC646NTE4
SN74HC646DWE4
SN74HC646DWG4
SN74HC646DWRE4
SN74HC646DWRG4
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC646NT ti SN74HC646, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC651NT ti SN74HC651, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC652 Octal Bus Transceiver And Register With 3-state Outputs
SN74HC652DW ti SN74HC652, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC664 Octal Bus Tranceivers With Parity
SN74HC665NT ti SN74HC665, Octal Bus Transceivers With Parity
SN74HC682 8-bit Magnitude Comparator
SN74HC682DW ti SN74HC682, 8-Bit Magnitude Comparators
SN74HC684 8-bit Magnitude Comparator
SN74HC684DW ti SN74HC684, 8-Bit Magnitude Comparators
SN74HC688 8-bit Identity Comparator
SN74HC688DW ti SN74HC688, 8-Bit Identity Comparators
SN74HC7001 Quad Postive-and Gate With Schmitt-trigger
SN74HC7001D ti SN74HC7001, Quadruple Positive-and Gates With Schmitt-trigger Inputs
SN74HC7002 Quad Positive-nOR GATE With Schmitt-trigger Inputs
SN74HC7002D ti SN74HC7002, Quadruple Positive-nOR GATEs With Schmitt-trigger Inputs
SN74HC7032 Quad Positive-OR GATE With Schmitt-trigger Inputs
SN74HC7032D ti SN74HC7032, Quadruple Positive-OR GATEs With Schmitt-trigger Inputs
SN74HC7074 6-section Multifunction (nand, Invert, Nor, Flip-flop) Circuits
SN74HC7074NT ti SN74HC7074, 6-Section Multifunction (NAND, Invert, Nor, Flip-Flop) Circuits
SN74HC7266 Quad 2-input Exclusive-nOR GATEs

CD74HC273E : D-Type Flip-Flops ti CD74HC273, High Speed CMOS Logic Octal D-type Flip-flops With Reset

SN54ABT162245WD : 16-bit Bus Transceivers With 3-state Outputs

SN74ACT3632-15 : CMOS/BiCMOS->AC/ACT Family Clocked Bidirectional Fifo: 512x36x2

SN74BCT126N : Non-Inverting Buffers and Drivers ti SN74BCT126, Quadruple Bus Buffer Gates With 3-State Outputs

THMC41 : DC Specific Two-phase DC Brushless Fan Motor Driver With Tach or RD Output

TLC339D : Lincmose Micropower Quad Comparators

TPS65811RTQR : The TPS65810 provides an easy to use, fully integrated solution for handheld devices, integrating charge management, multiple regulated power supplies, system management and display functions, in a small thermally-enhanced 8x8 package. The high level of integration enables typical board area space s

THS4631 : High-voltage, HIGH SLEW Rate, Wideband Fet-input Operational Amplifier

SN74LV10ANSRG4 : Single Schmitt Trigger Buffer

TL052AIDE4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) J-FET Tube 4.8mA 10 V ~ 30 V, 5 V ~ 15 V; IC OPAMP JFET 3MHZ DUAL 8SOIC Specifications: Packaging: Tube ; Amplifier Type: J-FET ; Number of Circuits: 2 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Slew Rate: 20.7 V/s ; Gain Bandwidth Product: 3MHz ; Current - Supply: 4.8mA ; Current - Output / Channel: 80mA ; Voltage - Supply, Single/Dual (): 10 V ~ 30 V, 5 V ~

OPA2325ID : IC OP AMP DUAL 10MHZ 8SOIC Texas Instruments' OPA2325 device is a dual, precision, low-voltage complementary metal oxide semiconductor (CMOS) operational amplifier optimized for very low noise and wide bandwidth when operating on a low quiescent current of only 650 µA.

 
0-C     D-L     M-R     S-Z