Details, datasheet, quote on part number: SN74HC640DWR
PartSN74HC640DWR
CategorySemiconductors => Logic => Buffer/Driver/Transceiver => Standard Transceiver
Part familySN74HC640 Octal Bus Transceivers With 3-State Outputs
TitleStandard Transceivers
DescriptionOctal Bus Transceivers With 3-State Outputs 20-SOIC -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload SN74HC640DWR datasheet
Cross ref.Similar parts: M74HC640M1R, M74HC640RM13TR
Quote
Find where to buy
 
Specifications 
Package GroupPDIP,SO,SOIC,TSSOP
Approx. Price (US$)0.53 | 1ku
Bits(#)8
ICC @ Nom Voltage(Max)(mA)0.08
F @ Nom Voltage(Max)(Mhz)28
Operating Temperature Range(C)-40 to 85
Technology FamilyHC
tpd @ Nom Voltage(Max)(ns)22
RatingCatalog
Schmitt TriggerNo
Output Drive (IOL/IOH)(Max)(mA)-6/6
VCC(Max)(V)6
VCC(Min)(V)2
Voltage(Nom)(V)6
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
20DWSOICR-PDSO-G2000LARGE T&RHC640 7.512.82.351.27

 

Features, Applications

D Wide Operating Voltage Range V D High-Current 3-State Outputs Can Drive Up
Typical tpd ns 6-mA Output Drive 5 V Low Input Current 1 A Max Inverting Logic

These octal bus transceivers are designed for asynchronous two-way communication between data buses. These devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending upon the level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated. ORDERING INFORMATION

TA PDIP - N SOIC to 85C SOP - NS PACKAGE Tube of 20 Tube of 25 Reel of 2000 Reel of 2000 Tube of 70 TSSOP - PW CDIP to 125C CFP - W Reel of 2000 Reel of 250 Tube of 20 Tube of 85 ORDERABLE PART NUMBER SNJ54HC640W HC640 TOP-SIDE MARKING SN74HC640N

LCCC - FK Tube 55 SNJ54HC640FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

On products compliant to MILPRF38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

FUNCTION TABLE (each transceiver) INPUTS L H DIR H X OPERATION B data to A bus A data to B bus Isolation

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input clamp current, IIK (VI VI > VCC) (see Note 20 mA Output clamp current, IOK (VO VO > VCC) (see Note 20 mA Continuous output current, IO (VO 0 to VCC). 35 mA Continuous current through VCC or GND. 70 mA Package thermal impedance, JA (see Note 2): DW package. 58C/W N package. 69C/W NS package. 60C/W PW package. 83C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

SN54HC640 MIN VCC VIH Supply voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 2 V VIL VI VO t/v Low-level input voltage Input voltage Output voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 4.5 V VCC 6 V VCC NOM 5 MAX 6 SN74HC640 MIN VCC 400 ns NOM 5 MAX 6 UNIT V

TA Operating free-air temperature C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)


 

Related products with the same datasheet
SN74HC640N
SN74HC640NSR
SN74HC640PW
SN74HC640PWR
SN74HC640PWT
SN74HC640DWG4
SN74HC640DWRG4
SN74HC640NSRG4
SN74HC640PWG4
SN74HC640PWRG4
SN74HC640PWTG4
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC640N ti SN74HC640, Octal Bus Transceivers With 3-State Outputs
SN74HC643 Octal Bus Transceivers With 3-state Outputs
SN74HC645
SN74HC645DW ti SN74HC645, Octal Bus Transceivers With 3-State Outputs
SN74HC646 Octal Bus Transceiver And Register With 3-state Outputs
SN74HC646DW ti SN74HC646, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC651NT ti SN74HC651, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC652 Octal Bus Transceiver And Register With 3-state Outputs
SN74HC652DW ti SN74HC652, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC664 Octal Bus Tranceivers With Parity
SN74HC665NT ti SN74HC665, Octal Bus Transceivers With Parity
SN74HC682 8-bit Magnitude Comparator
SN74HC682DW ti SN74HC682, 8-Bit Magnitude Comparators
SN74HC684 8-bit Magnitude Comparator
SN74HC684DW ti SN74HC684, 8-Bit Magnitude Comparators
SN74HC688 8-bit Identity Comparator
SN74HC688DW ti SN74HC688, 8-Bit Identity Comparators
SN74HC7001 Quad Postive-and Gate With Schmitt-trigger
SN74HC7001D ti SN74HC7001, Quadruple Positive-and Gates With Schmitt-trigger Inputs
SN74HC7002 Quad Positive-nOR GATE With Schmitt-trigger Inputs
SN74HC7002D ti SN74HC7002, Quadruple Positive-nOR GATEs With Schmitt-trigger Inputs

SN74ABT2245PW : Standard Transceivers ti SN74ABT2245, Octal Transceivers And Line/mos Drivers With 3-State Outputs

SN74ABT646ANT : Registered Transceivers ti SN74ABT646A, Octal Bus Transceivers And Registers With 3-State Outputs

SN74ACT04D : ti SN74ACT04, Hex Inverters

SN75LBC970ADLR : ti SN75LBC970A, Differential Converter-control

SN75LVDS9637D : High-speed Differential Line Receivers

LM833DGKR : IC, DUAL HIGH SPEED AUDIO OP AMP, MSOP8 Specifications: Amplifier Class: - ; No. of Channels: 2 ; Output Power: - ; THD + N: - ; Load Impedance: 2kohm ; Amplifier Case Style: MSOP ; Supply Voltage Range: 5V to 18V ; Operating Temperature Range: -40C to +85C ; No. of Pins: 8 ; MSL: MSL 1 - Unlimited

THS1040IDWG4 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 2 Single-Ended, Unipolar; 1 Differential, Unipolar Tube Analog and Digital; IC ADC 10BIT 40MSPS LP 28-SOIC Specifications: Number of Bits: 10 ; Package / Case: 28-SOIC (0.295", 7.50mm Width) ; Data Interface: Parallel ; Packaging: Tube ; Sampling Rate (Per Second): 40M ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Analog and Digital ; Number of Inputs and Type: 2 Single-Ended, Unipolar;

ESD122DMX-EVM : EVAL BOARD FOR ESD122 Texas Instruments' ESD122 is a bidirectional TVS ESD protection diode array for USB Type-C™ and HDMI 2.0 circuit protection. The ESD122 is rated to dissipate contact ESD strikes at the maximum level specified in the IEC 61000-4-2 international standard (17 kV contact, 17 kV air-gap).

 
0-C     D-L     M-R     S-Z