Details, datasheet, quote on part number: SN74HC574N
PartSN74HC574N
CategorySemiconductors => Logic => Flip-Flop/Latch/Register => D-Type Flip-Flop
Part familySN74HC574 Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs
TitleD-Type (3-State) Flip-Flops
DescriptionOctal Edge-Triggered D-Type Flip-Flops With 3-State Outputs 20-PDIP -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload SN74HC574N datasheet
Cross ref.Similar parts: CD74HC574E, CD74HC574EX, MC74HC574AN, MC74HC574N, MC74HC374AN, MC74HC574ANG, HD74HC374P, HD74HC564P, HD74HC574P, HD74HC574P-E
Quote
Find where to buy
 
Specifications 
3-State OutputYes
Voltage(Nom)(V)3.3,5
Bits(#)8
ICC @ Nom Voltage(Max)(mA)0.08
F @ Nom Voltage(Max)(Mhz)28
Operating Temperature Range(C)-40 to 85
Technology FamilyHC
Package GroupPDIP,SO,SOIC,SSOP,TSSOP
RatingCatalog
Schmitt TriggerNo
tpd @ Nom Voltage(Max)(ns)38
VCC(Max)(V)6
Approx. Price (US$)0.12 | 1ku
VCC(Min)(V)2
Output Drive (IOL/IOH)(Max)(mA)7.8/-7.8
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
20NPDIPR-PDIP-T20TUBESN74HC574N 6.3524.334.572.54

 

Features, Applications
SN54HC574, SN74HC574 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

Wide Operating Voltage Range 6 V High-Current 3-State Noninverting Outputs Drive Bus Lines Directly To 15 LSTTL Loads Low Power Consumption, 80-A Max ICC Typical tpd ns 6-mA Output Drive 5 V Low Input Current 1 A Max Bus-Structured Pinout

These octal edge-triggered D-type flip-flops feature 3-state outputs designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops enter data on the low-to-high transition of the clock (CLK) input. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. ORDERING INFORMATION

TA PDIP N SOIC to 85C SSOP DB SOP NS TSSOP PW CDIP to 125C CFP W LCCC FK PACKAGE Tube of 20 Tube of 25 Reel of 2000 Reel of 2000 Reel of 2000 Tube of 70 Reel of 2000 Reel of 250 Tube of 20 Tube of 85 Tube of 55

SNJ54HC574FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

OE does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

FUNCTION TABLE (each flip-flop) INPUTS OE CLK H or OUTPUT Q0 Z
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input clamp current, IIK (VI VI > VCC) (see Note 20 mA Output clamp current, IOK (VO VO > VCC) (see Note 20 mA Continuous output current, IO (VO 0 to VCC). 35 mA Continuous current through VCC or GND. 70 mA Package thermal impedance, JA (see Note 2): DB package. 70C/W DW package. 58C/W N package. 69C/W NS package. 60C/W PW package. 83C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

SN54HC574 MIN VCC VIH Supply voltage High-level input voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 2 V VIL VI VO t/v Low-level input voltage Input voltage Output voltage Input transition rise/fall time VCC 2 V VCC 4.5 V VCC 4.5 V VCC 6 V VCC NOM 5 MAX 6 SN74HC574 MIN VCC 500 ns NOM 5 MAX 6 UNIT V

VCC 400 TA Operating free-air temperature C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)


 

Related products with the same datasheet
SN74HC574DW
SN74HC574DWR
SN74HC574N3
SN74HC574NSR
SN74HC574PW
SN74HC574PWR
SN74HC574PWT
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC574N3 ti SN74HC574, Octal Edge-triggered D-type Flip-flops With 3-State Outputs
SN74HC590A 8-bit Binary Counter With 3-state Registers
SN74HC590AD ti SN74HC590A, 8-Bit Binary Counters With 3-State Output Registers
SN74HC594 8-bit Shift Register With Output Register
SN74HC594D ti SN74HC594, 8-Bit Shift Registers With Output Registers
SN74HC594DB 8-bit Shift Registers With Output Registers
SN74HC594DR ti SN74HC594, 8-Bit Shift Registers With Output Registers
SN74HC595 8-bit Shift Registers With 3-state Output Registers
SN74HC595D ti SN74HC595, 8-Bit Shift Registers With 3-State Output Registers
SN74HC623 Octal Bus Transceiver With 3-state Outputs
SN74HC623DW ti SN74HC623, Octal Bus Transceivers With 3-State Outputs
SN74HC640 Octal Bus Transceivers With 3-state Outputs
SN74HC640DW ti SN74HC640, Octal Bus Transceivers With 3-State Outputs
SN74HC643 Octal Bus Transceivers With 3-state Outputs
SN74HC645
SN74HC645DW ti SN74HC645, Octal Bus Transceivers With 3-State Outputs
SN74HC646 Octal Bus Transceiver And Register With 3-state Outputs
SN74HC646DW ti SN74HC646, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC651NT ti SN74HC651, Octal Bus Transceivers And Registers With 3-State Outputs
SN74HC652 Octal Bus Transceiver And Register With 3-state Outputs
SN74HC652DW ti SN74HC652, Octal Bus Transceivers And Registers With 3-State Outputs

5962-8682601EA : ti CD54HC194, High Speed CMOS Logic 4-Bit Bidirectional Universal Shift Register

SN74ALS174DR : D-Type Flip-Flops ti SN74ALS174, Hex D-type Positive-edge-triggered Flip-flops With Clear

SN74LVTZ240DWR : Inverting Buffers and Drivers ti SN74LVTZ240, 3.3-V Abt Octal Buffers/drivers With 3-State Outputs

CD74HCT166M96E4 : High-speed CMOS Logic 4-bit Binary Ripple Counter

TLV320AIC33IRGZTG4 : IC, AUDIO CODEC, 24BIT, 96KHZ, QFN-48 Specifications: Audio CODEC Type: Stereo ; No. of ADCs: 2 ; No. of DACs: 2 ; No. of Input Channels: 10 ; No. of Output Channels: 7 ; ADC / DAC Resolution: 24bit ; ADCs / DACs Signal to Noise Ratio: 100dB ; Sampling Rate: 96kSPS ; IC Interface Type: I2C, Serial ; Supply Voltage Range: 2.7V to 3.6V, 1

TPS3828-50QDBVRG4Q : 33 - Processor Supervisory Circuits

TRS3222CDWRG4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Line Transceiver Tape & Reel (TR) 3 V ~ 5.5 V; IC DVR/RCVR RS232 ESD 20SOIC Specifications: Number of Drivers/Receivers: 2/2 ; Type: Line Transceiver ; Voltage - Supply: 3 V ~ 5.5 V ; Package / Case: 20-SOIC (0.295", 7.50mm Width) ; Packaging: Tape & Reel (TR) ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

MSP430F5509IPT : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 1.8 V ~ 3.6 V; IC MCU 16BIT 24KB FLASH 48LQFP Specifications: Program Memory Size: 24KB (24K x 8) ; RAM Size: 6K x 8 ; Number of I /O: 31 ; Package / Case: 48-LQFP ; Speed: 25MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: RISC ; Data Converters: A/D 8x10b ; Core Size: 16-Bit ; O

MSP430F2132IPWR : Mixed Signal Microcontroller

SN74CBT16292DLRG4 : 12-bit 1-of-2 Fet Multiplexer/demultiplexer With Internal Pulldown Resistors

ISO7742FDWR : DGTL ISO 5KV 4CH GEN PURP 16SOIC Texas Instruments' ISO774x devices are high-performance, quad-channel digital isolators with 5000 VRMS (DW package) and 2500 VRMS (DBQ package) isolation ratings per UL 1577. This family of devices has reinforced insulation ratings according to VDE, CSA, TUV, and CQC.

MSP430FR2533IRHBR : 16-bit Microcontrollers - MCU Ultra low power Micro Controller

 
0-C     D-L     M-R     S-Z