Details, datasheet, quote on part number: SN74HC541DWR
CategorySemiconductors => Logic => Buffer/Driver/Transceiver => Non-Inverting Buffer/Driver
Part familySN74HC541 Octal Buffers And Line Drivers With 3-State Outputs
TitleNon-Inverting Buffers and Drivers
DescriptionOctal Buffers And Line Drivers With 3-State Outputs 20-SOIC -40 to 85
CompanyTexas Instruments, Inc.
DatasheetDownload SN74HC541DWR datasheet
Cross ref.Similar parts: 74HC541D, 74VHC541FT, M74HC541RM13TR, MM74HC541WM, MM74HC541WMX, TC74HC541AFWELP
Find where to buy
ICC @ Nom Voltage(Max)(mA)0.08
F @ Nom Voltage(Max)(Mhz)28
Operating Temperature Range(C)-40 to 85
Technology FamilyHC
Schmitt TriggerNo
Output Drive (IOL/IOH)(Max)(mA)-6/6
tpd @ Nom Voltage(Max)(ns)25
Approx. Price (US$)0.15 | 1ku
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
20DWSOICR-PDSO-G2000LARGE T&RHC541 7.512.82.351.27


Features, Applications

Wide Operating Voltage Range 6 V High-Current 3-State Outputs Drive Bus Lines Directly To 15 LSTTL Loads Low Power Consumption, 80-A Max ICC Typical tpd ns 6-mA Output Drive 5 V Low Input Current 1 A Max Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs)

These octal buffers and line drivers feature the performance of the 'HC240 devices and a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout. The 3-state outputs are controlled by a two-input NOR gate. If either output-enable or OE2) input is high, all eight outputs are in the high-impedance state. The 'HC541 devices provide true data at the outputs.

TA PDIP N SOIC to 85C SOP NS SSOP DB TSSOP PW CDIP to 125C CFP W LCCC FK PACKAGE Tube of 20 Tube of 25 Reel of 2000 Reel of 2000 Reel of 2000 Tube of 70 Reel of 2000 Reel of 250 Tube of 20 Tube of 85 Tube of 55 ORDERABLE PART NUMBER SNJ54HC541W HC541 TOP-SIDE MARKING SN74HC541N HC541

SNJ54HC541FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input clamp current, IIK (VI VI > VCC) (see Note 20 mA Output clamp current, IOK (VO VO > VCC) (see Note 20 mA Continuous output current, IO (VO 0 to VCC). 35 mA Continuous current through VCC or GND. 70 mA Package thermal impedance, JA (see Note 2): DB package. 70C/W DW package. 58C/W N package. 69C/W NS package. 60C/W PW package. 83C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

SN54HC541 MIN VCC VIH Supply voltage High-level input voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 2 V VIL VI VO t/v Low-level input voltage Input voltage Output voltage Input transition rise/fall time VCC 2 V VCC 4.5 V VCC 4.5 V VCC 6 V VCC NOM 5 MAX 6 SN74HC541 MIN VCC 500 ns NOM 5 MAX 6 UNIT V

VCC 400 TA Operating free-air temperature C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC541N ti SN74HC541, Octal Buffers And Line Drivers With 3-State Outputs
SN74HC563 Octal D-type Transparent Latch With 3-state Outputs
SN74HC563DW ti SN74HC563, Octal Transparent D-type Latches With 3-State Outputs
SN74HC564 Octal D-type Edge-triggered Flip-flops With 3-state Outputs
SN74HC564DW ti SN74HC564, Octal D-type Edge-triggered Flip-flops
SN74HC573A Octal Transparent D-type Latch With 3-state Outputs
SN74HC573ADBR ti SN74HC573A, Octal Transparent D-type Latches With 3-State Outputs
SN74HC574 Octal Edge-triggered D-type Flip-flop With 3-state Outputs
SN74HC574DBR ti SN74HC574, Octal Edge-triggered D-type Flip-flops With 3-State Outputs
SN74HC590A 8-bit Binary Counter With 3-state Registers
SN74HC590AD ti SN74HC590A, 8-Bit Binary Counters With 3-State Output Registers
SN74HC594 8-bit Shift Register With Output Register
SN74HC594D ti SN74HC594, 8-Bit Shift Registers With Output Registers
SN74HC594DB 8-bit Shift Registers With Output Registers
SN74HC594DR ti SN74HC594, 8-Bit Shift Registers With Output Registers
SN74HC595 8-bit Shift Registers With 3-state Output Registers
SN74HC595D ti SN74HC595, 8-Bit Shift Registers With 3-State Output Registers
SN74HC623 Octal Bus Transceiver With 3-state Outputs
SN74HC623DW ti SN74HC623, Octal Bus Transceivers With 3-State Outputs
SN74HC640 Octal Bus Transceivers With 3-state Outputs
SN74HC640DW ti SN74HC640, Octal Bus Transceivers With 3-State Outputs

MPC508AP : ti MPC508, 8-Channel Single-ended Input Analog Multiplexer

SN74CBT3244RGYR : Standard Bus Switches ti SN74CBT3244, Octal Fet Bus Switch

SN74LS161ANSR : ti SN74LS161A, Synchronous 4-Bit Binary Counters

SN74V263PZAEP : Synchronous FIFOs ti SN74V263-EP, Military Enhanced Plastic 8192 X 18 Synchronous Fifo Memory

SNJ54ABTH16244WD : Inverting Buffers and Drivers ti SN54ABTH16244, 16-Bit Buffers/drivers With 3-State Outputs

TLC2558QDWR : ti TLC2558, 12-bit, 400 KSPS ADC, 8-Ch. Serial With Powerdown

TVP3033 : Video Interface Palette

PTQA420025N2AS : 100-w 48-V Input Isolated Dc/dc Converter

LP2981A-30DBVT : Low Dropout (LDO) Regulators 100-mA 0.75% Tolerance Specifications: Manufacturer: Texas Instruments ; Product Category: Low Dropout (LDO) Regulators ; RoHS:  Details ; Number of Outputs: 1 ; Polarity: Positive ; Input Voltage MAX: 16 V ; Output Voltage: 3 V ; Output Type: Fixed ; Dropout Voltage (Max): 0.003 V at 0 A ; Output Current: 0.1 A ; Li

TLV5613IDWG4 : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tube Analog and Digital; IC DAC 12BIT PAR 20-SOIC Specifications: Data Interface: Parallel ; Number of Bits: 12 ; Operating Temperature: -40C ~ 85C ; Package / Case: 20-SOIC (0.295", 7.50mm Width) ; Packaging: Tube ; Voltage Supply Source: Analog and Digital ; Settling Time: 3.5s ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

INA180B2IDBVT : IC AMP CUR SENSE 350KHZ SOT23-5 Texas Instruments' INA180 is a family of cost-optimized, current-sense amplifiers (also called current-shunt monitors) that sense voltage drops across current-sense resistors at common-mode voltages from -0.2 V to +26 V, independent of the supply voltage. The INA180 integrates a matched resistor

0-C     D-L     M-R     S-Z