Details, datasheet, quote on part number: SN74HC540PWR
PartSN74HC540PWR
CategorySemiconductors => Logic => Buffer/Driver/Transceiver => Inverting Buffer/Driver
Part familySN74HC540 Octal Buffers And Line Drivers With 3-State Outputs
TitleInverting Buffers and Drivers
DescriptionOctal Buffers And Line Drivers With 3-State Outputs 20-TSSOP -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload SN74HC540PWR datasheet
Cross ref.Similar parts: MC74HC540ADTEL, MC74HC540ADTELG
Quote
Find where to buy
 
Specifications 
Package GroupPDIP,SO,SOIC,TSSOP
Bits(#)8
ICC @ Nom Voltage(Max)(mA)0.08
Operating Temperature Range(C)-40 to 85
Technology FamilyHC
RatingCatalog
Schmitt TriggerNo
Voltage(Nom)(V)5
Output Drive (IOL/IOH)(Max)(mA)-6/6
F @ Nom Voltage(Max)(Mhz)20
VCC(Max)(V)6
VCC(Min)(V)2
tpd @ Nom Voltage(Max)(ns)25
Approx. Price (US$)0.15 | 1ku
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
20PWTSSOPR-PDSO-G2000LARGE T&RHC540 4.46.51.65

 

Features, Applications
SN54HC540, SN74HC540 OCTAL BUFFERS AND LINE DRIVERS WITH 3STATE OUTPUTS
D Wide Operating Voltage Range V D High-Current 3-State Outputs Drive Bus

Lines Directly To 15 LSTTL Loads Low Power Consumption, 80-A Max ICC Typical tpd ns 6-mA Output Drive 5 V Low Input Current 1 A Max Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs)

These octal buffers and line drivers feature the performance of the popular 'HC240 series and offer a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout. The 3-state control gate a 2-input NOR. If either output-enable or OE2) input is high, all eight outputs are in the high-impedance state. The 'HC540 devices provide inverted data at the outputs.

TA PDIP - N SOIC to 85C SOP - NS SSOP - DB PACKAGE Tube of 20 Tube of 25 Reel of 2000 Reel of 2000 Reel of 2000 Tube of 70 TSSOP - PW CDIP to 125C CFP - W LCCC - FK Reel of 2000 Reel of 250 Tube of 20 Tube of 85 Tube of 55 ORDERABLE PART NUMBER SNJ54HC540W HC540

SNJ54HC540FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

On products compliant to MILPRF38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

FUNCTION TABLE (each buffer/driver) INPUTS OE1 OE2 OUTPUT
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input clamp current, IIK (VI VI > VCC) (see Note 20 mA Output clamp current, IOK (VO VO > VCC) (see Note 20 mA Continuous output current, IO (VO 0 to VCC). 35 mA Continuous current through VCC or GND. 70 mA Package thermal impedance, JA (see Note 2): DB package. 70C/W DW package. 58C/W N package. 69C/W NS package. 60C/W PW package. 83C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

SN54HC540 MIN VCC VIH Supply voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 2 V VIL VI VO t/v Low-level input voltage Input voltage Output voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 4.5 V VCC 6 V VCC NOM 5 MAX 6 SN74HC540 MIN VCC 400 ns NOM 5 MAX 6 UNIT V

TA Operating free-air temperature C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)


 

Related products with the same datasheet
SN74HC540DWR
SN74HC540N
SN74HC540NSR
SN74HC540PW
SN74HC540PWT
SN74HC540NSRG4
SN74HC540PWG4
SN74HC540PWRG4
SN74HC540PWTG4
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC540PWT ti SN74HC540, Octal Buffers And Line Drivers With 3-State Outputs
SN74HC541 Octal Line Driver/buffer With 3-state Outputs
SN74HC541DBR ti SN74HC541, Octal Buffers And Line Drivers With 3-State Outputs
SN74HC563 Octal D-type Transparent Latch With 3-state Outputs
SN74HC563DW ti SN74HC563, Octal Transparent D-type Latches With 3-State Outputs
SN74HC564 Octal D-type Edge-triggered Flip-flops With 3-state Outputs
SN74HC564DW ti SN74HC564, Octal D-type Edge-triggered Flip-flops
SN74HC573A Octal Transparent D-type Latch With 3-state Outputs
SN74HC573ADBR ti SN74HC573A, Octal Transparent D-type Latches With 3-State Outputs
SN74HC574 Octal Edge-triggered D-type Flip-flop With 3-state Outputs
SN74HC574DBR ti SN74HC574, Octal Edge-triggered D-type Flip-flops With 3-State Outputs
SN74HC590A 8-bit Binary Counter With 3-state Registers
SN74HC590AD ti SN74HC590A, 8-Bit Binary Counters With 3-State Output Registers
SN74HC594 8-bit Shift Register With Output Register
SN74HC594D ti SN74HC594, 8-Bit Shift Registers With Output Registers
SN74HC594DB 8-bit Shift Registers With Output Registers
SN74HC594DR ti SN74HC594, 8-Bit Shift Registers With Output Registers
SN74HC595 8-bit Shift Registers With 3-state Output Registers
SN74HC595D ti SN74HC595, 8-Bit Shift Registers With 3-State Output Registers
SN74HC623 Octal Bus Transceiver With 3-state Outputs
SN74HC623DW ti SN74HC623, Octal Bus Transceivers With 3-State Outputs

CD40175BM96 : D-Type Flip-Flops ti CD40175B, CMOS Quad D-type Flip-flop

DSD1608PAH : Audio DACs ti DSD1608, 24-Bit 8ch Multi-format DAC

SN74CBT1G125 : Bus Oriented Circuits Single Fet Bus Switch

SN74S140N : Non-Inverting Buffers and Drivers ti SN74S140, Dual 4-input Positive-nand 50-Ohm Line Drivers

TMS320C6211-167 : TMS320 Family

TLE2071AMU : Excalibur Low-noise High-speed Jfet-input Operational Amplifiers

SN74LV540ANSRE4 : DUAL Positive-edge-triggered D-type Flip-flop

LM3S1627-IQR50-A0 : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 2.25 V ~ 2.75 V; IC ARM CORTEX MCU 128KB 64LQFP Specifications: Program Memory Size: 128KB (128K x 8) ; RAM Size: 32K x 8 ; Number of I /O: 33 ; Package / Case: 64-LQFP ; Speed: 50MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: ARM Cortex-M3 ; Data Converters: A/D 4x10b ; Core Si

CD40107BME4 : Logic - Gate And Inverter Integrated Circuit (ics) NAND Gate Tube 0, 100mA 3 V ~ 18 V; IC GATE NAND DUAL 2INPUT 8SOICN Specifications: Number of Circuits: 2 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Logic Type: NAND Gate ; Packaging: Tube ; Mounting Type: Surface Mount ; Number of Inputs: 2 ; Current - Output High, Low: 0, 100mA ; Operating Temperature: -55C ~ 125C ; Voltage - Supply: 3 V ~ 18 V ; Lead Fre

TLV3404CDG4 : Linear - Comparator Integrated Circuit (ics) General Purpose Tube 2.5 V ~ 16 V, 1.25 V ~ 8 V; IC QUAD NANOPWR COMP 14-SOIC Specifications: Type: General Purpose ; Output Type: CMOS, Open-Drain ; Voltage - Supply: 2.5 V ~ 16 V, 1.25 V ~ 8 V ; Number of Elements: 4 ; Package / Case: 14-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

 
0-C     D-L     M-R     S-Z