Details, datasheet, quote on part number: SN74HC4852DGVR
PartSN74HC4852DGVR
CategorySemiconductors => Switches and Multiplexers => Analog Switches/Muxes
Part familySN74HC4852 Dual 4-to-1 Channel Analog Multiplexer/Demultiplexer with Injection Current Effect Control
DescriptionDual 4-to-1 Channel Analog Multiplexer/Demultiplexer with Injection Current Effect Control 16-TVSOP -40 to 125
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload SN74HC4852DGVR datasheet
Quote
Find where to buy
 
Specifications 
Supply Current(Max)(uA)10
OFF-state leakage current(Max)(µA)4
Input/Output Continuous Current(Max)(mA)25
Ron(Max)(Ohms)700
RatingCatalog
Input/Output ON-state Capacitance(Typ)(pF)6.7
VIL(Max)(V)vcc*.3
Input/Output OFF-state Capacitance(Typ)(pF)6.7
Vss(Max)(V)N/A
Vdd(Max)(V)6
Vss(Min)(V)N/A
ON-state leakage current(Max)(µA)1
Number of Channels(#)2
Ron(Typ)(Ohms)150
Operating Temperature Range(C)-40 to 125,-40 to 85
Vdd(Min)(V)2
ESD Charged Device Model(kV)1
VIH(Min)(V)vcc*.7
ESD HBM(kV)2
Approx. Price (US$)0.19 | 1ku
Supply Current(Typ)(uA)2
Supply Range(Max)6
Package GroupPDIP,SOIC,TSSOP,TVSOP
Power Supply TypeSingle
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
16DGVTVSOPR-PDSO-G2000LARGE T&RHC4852 4.43.61.05.4

 

Features, Applications
SN74HC4852 DUAL 4TO1 CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER WITH INJECTIONCURRENT EFFECT CONTROL

<1mV/mA (see Figure 1) Low Crosstalk Between Switches Pin Compatible with SN74HC4052, SN74LV4052A, and to 6-V VCC Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD - 2000-V Human-Body Model - 200-V Machine Model - 1000-V Charged-Device Model (C101)

This dual 4-to-1 CMOS analog multiplexer/demultiplexer is pin compatible with the 4052 function and also features injection-current effect control. This feature has excellent value in automotive applications where voltages in excess of normal supply voltages are common. The injection-current effect control allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel. This eliminates the need for external diode/resistor networks typically used to keep the analog channel signals within the supply voltage range. ORDERING INFORMATION

TA PDIP - N SOIC to 125C TSSOP - PW PACKAGE Tube Tape and reel Tube Tape and reel ORDERABLE PART NUMBER SN74HC4852PWR HC4852 TOP-SIDE MARKING SN74HC4852N

TVSOP - DGV Tape and reel SN74HC4852DGVR HC4852 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE INPUTS INH ON CHANNEL 1Y3, 2Y3 None

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7.0 V Input voltage range, VI (see Note V to VCC 0.5 V Switch I/O voltage range, VIO (see Notes 1 and V to VCC 0.5 V Input clamp current, IIK (VI VI > VCC). 20 mA I/O diode current, IIOK (VIO 0 or VIO > VCC). 20 mA Switch through current, IS (VIO 0 to VCC). 25 mA Continuous current through VCC or GND. 50 mA Package thermal impedance, JA (see Note 3): D package. 73C/W DGV package. 120C/W N package. 67C/W PW package. 108C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. This value is limited 5.5 V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51-7.

MIN VCC Supply voltage VCC 2 V VCC 3 V VCC 3.3 V VCC 4.5 V VCC 6 V VCC 2 V VIL Low-level input voltage, control inputs VCC 3 V VCC 3.3 V VCC 4.5 V VCC V VI VIO Control input voltage Input/output voltage VCC 2 V VCC 3 V t/v Input transition rise or fall rate VCC 3.3 V VCC 4.5 V VCC ns MAX 6 UNIT V

VCC 400 TA Operating free-air temperature 125 C NOTE 4: All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.


 

Related products with the same datasheet
SN74HC4852D
SN74HC4852DR
SN74HC4852N
SN74HC4852PW
SN74HC4852PWR
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC4852DR Dual 4-to-1 Channel Analog Multiplexer/demultiplexer With Injection Current Effect Control
SN74HC534 Octal Edge-triggered D-type Flip-flop With 3-state Output
SN74HC534DW ti SN74HC534, Octal D-type Edge-triggered Flip-flops
SN74HC540 Octal Inverting Line Driver/buffer With 3-state Outputs
SN74HC540DW ti SN74HC540, Octal Buffers And Line Drivers With 3-State Outputs
SN74HC541 Octal Line Driver/buffer With 3-state Outputs
SN74HC541DBR ti SN74HC541, Octal Buffers And Line Drivers With 3-State Outputs
SN74HC563 Octal D-type Transparent Latch With 3-state Outputs
SN74HC563DW ti SN74HC563, Octal Transparent D-type Latches With 3-State Outputs
SN74HC564 Octal D-type Edge-triggered Flip-flops With 3-state Outputs
SN74HC564DW ti SN74HC564, Octal D-type Edge-triggered Flip-flops
SN74HC573A Octal Transparent D-type Latch With 3-state Outputs
SN74HC573ADBR ti SN74HC573A, Octal Transparent D-type Latches With 3-State Outputs
SN74HC574 Octal Edge-triggered D-type Flip-flop With 3-state Outputs
SN74HC574DBR ti SN74HC574, Octal Edge-triggered D-type Flip-flops With 3-State Outputs
SN74HC590A 8-bit Binary Counter With 3-state Registers
SN74HC590AD ti SN74HC590A, 8-Bit Binary Counters With 3-State Output Registers
SN74HC594 8-bit Shift Register With Output Register
SN74HC594D ti SN74HC594, 8-Bit Shift Registers With Output Registers
SN74HC594DB 8-bit Shift Registers With Output Registers
SN74HC594DR ti SN74HC594, 8-Bit Shift Registers With Output Registers

JM38510/34701BSA : Identity Comparators ti SN54F521, 8-Bit Identity Comparators

TB5R2DR : ti TB5R2, Quad Pecl Line Receiver

TPS2201YDF : Dual-slot PC Card Power-interface Switches For Parallel Pcmcia Controllers

TPS79418DGNT : Ultra-low Noise, High Psrr, Fast RF, High-Enable, 250mA Low Dropout Regulator

TPS3808G15DRVRG4 : Ultra-small Supply Voltage Supervisors

74CB3Q16211DGVRG4 : 24-bit Switch WITH Precharged Outputs 2.5-v/3.3-v Low-voltage FET BUS Switch

TPA6211A1TDGNRQ1 : Linear - Amplifier - Audio Integrated Circuit (ics) Class AB Cut Tape (CT) 2.5 V ~ 5.5 V; IC AMP AUDIO PWR 3.1W MONO 8MSOP Specifications: Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad ; Type: Class AB ; Output Type: 1-Channel (Mono) ; Voltage - Supply: 2.5 V ~ 5.5 V ; Packaging: Cut Tape (CT) ; Features: Depop, Differential Inputs, Shutdown, Thermal Protection ; Max Output Power x Channels @ Load:

SN74AUP1T57DBVRE4 : Low-power DUAL 2-input Positive-and GATE

VSP3210YG4 : Linear - Video Processing Integrated Circuit (ics) Surface Mount Tray; IC VIDEO CCD SIGNAL PROC 48LQFP Specifications: Mounting Type: Surface Mount ; Package / Case: 48-LQFP ; Type: CCD Signal Processor ; Packaging: Tray ; Applications: Scanners ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

LMH1218EVM : Video IC Development Tools LMH1218 Eval Module Texas Instruments LMH0318 3Gbps HD/SD SDI Reclocker includes an integrated cable driver and is designed to drive serial video data compatible to SMPTE-SDI and DVB-ASI standards. The clock and data recovery circuit eliminates accumulated jitter. It also detects the incoming data rate without requi

TL084IDR : IC OPAMP JFET 3MHZ 14SOIC Texas Instruments' TL08xx, JFET-input, operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolith

 
0-C     D-L     M-R     S-Z