Details, datasheet, quote on part number: SN74HC4851D
PartSN74HC4851D
CategorySemiconductors => Switches and Multiplexers => Analog Switches/Muxes
Part familySN74HC4851 8-Channel Analog Multiplexer/Demultiplexer with Injection-Current Effect Control
TitleMultiplexers
Description8-Channel Analog Multiplexer/Demultiplexer with Injection-Current Effect Control 16-SOIC -40 to 125
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload SN74HC4851D datasheet
Cross ref.Similar parts: MC74HC4851AD
Quote
Find where to buy
 
Specifications 
OFF-state leakage current(Max)(µA)4
Input/Output Continuous Current(Max)(mA)25
Ron(Max)(Ohms)700
RatingCatalog
Input/Output ON-state Capacitance(Typ)(pF)6.7
Operating Temperature Range(C)-40 to 125
VIL(Max)(V)vcc*.3
Input/Output OFF-state Capacitance(Typ)(pF)6.7
Vss(Max)(V)N/A
Vdd(Max)(V)6
Vss(Min)(V)N/A
ON-state leakage current(Max)(µA)1
Ron(Typ)(Ohms)150
Vdd(Min)(V)2
ESD Charged Device Model(kV)1
Number of Channels(#)1
VIH(Min)(V)vcc*.7
ESD HBM(kV)2
Approx. Price (US$)0.19 | 1ku
Supply Current(Max)(uA)40
Supply Current(Typ)(uA)2
Supply Range(Max)6
Package GroupPDIP,SOIC,TSSOP,TVSOP
Power Supply TypeSingle
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
16DSOICR-PDSO-G40TUBEHC4851 3.919.91.581.27

 

Features, Applications
SN74HC4851 8CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER WITH INJECTIONCURRENT EFFECT CONTROL

(see Figure 1) Low Crosstalk Between Switches Pin Compatible With SN74HC4051, SN74LV4051A, and to 6-V VCC Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD - 2000-V Human-Body Model - 200-V Machine Model - 1000-V Charged-Device Model (C101)

This eight-channel CMOS analog multiplexer/demultiplexer is pin compatible with the '4051 function and, additionally, features injection-current effect control, which has excellent value in automotive applications where voltages in excess of normal supply voltages are common. The injection-current effect control allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel. This eliminates the need for external diode/resistor networks typically used to keep the analog channel signals within the supply-voltage range. ORDERING INFORMATION

TA PDIP - N SOIC to 125C TSSOP - PW PACKAGE Tube Tape and reel Tube Tape and reel ORDERABLE PART NUMBER SN74HC4851PWR HC4851 TOP-SIDE MARKING HC4851N

TVSOP - DGV Tape and reel SN74HC4851DGVR HC4851 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Injection- Current Control Injection- Current Control Injection- Current Control Injection- Current Control Injection- Current Control Injection- Current Control Injection- Current Control Injection- Current Control Injection- Current Control

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input voltage range, VI (see Note V to VCC 0.5 V Switch I/O voltage range, VIO (see Notes 1 and V to VCC 0.5 V Input clamp current, IIK (VI VI > VCC). 20 mA I/O diode current, IIOK (VIO 0 or VIO > VCC). 20 mA Switch through current, IT (VIO 0 to VCC). 25 mA Continuous current through VCC or GND. 50 mA Package thermal impedance, JA (see Note 3): D package. 73C/W DGV package. 120C/W N package. 67C/W PW package. 108C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. This value is limited 5.5 V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51-7.

MIN VCC Supply voltage VCC 2 V VCC 3 V VCC 3.3 V VCC 4.5 V VCC 6 V VCC 2 V VIL Low-level input voltage, control inputs VCC 3 V VCC 3.3 V VCC 4.5 V VCC V VI VIO Control input voltage Input/output voltage VCC 2 V VCC 3 V t/v Input transition rise or fall time VCC 3.3 V VCC 4.5 V VCC 6 V VCC ns MAX 6 UNIT V

TA Operating free-air temperature 125 C NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to TI application report Implications of Slow or Floating CMOS Inputs, literature number SCBA004.


 

Related products with the same datasheet
SN74HC4851DGVR
SN74HC4851DR
SN74HC4851N
SN74HC4851PW
SN74HC4851PWR
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC4851DGVR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DGVR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851N Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851N ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PW Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PW ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PWR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PWR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851QDRQ1 Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4852 Dual 4-to-1 Channel Analog Multiplexer/demultiplexer With Injection Current Effect Control
SN74HC534 Octal Edge-triggered D-type Flip-flop With 3-state Output
SN74HC534DW ti SN74HC534, Octal D-type Edge-triggered Flip-flops
SN74HC540 Octal Inverting Line Driver/buffer With 3-state Outputs
SN74HC540DW ti SN74HC540, Octal Buffers And Line Drivers With 3-State Outputs
SN74HC541 Octal Line Driver/buffer With 3-state Outputs
SN74HC541DBR ti SN74HC541, Octal Buffers And Line Drivers With 3-State Outputs
SN74HC563 Octal D-type Transparent Latch With 3-state Outputs
SN74HC563DW ti SN74HC563, Octal Transparent D-type Latches With 3-State Outputs
SN74HC564 Octal D-type Edge-triggered Flip-flops With 3-state Outputs

CY74FCT2574CTSOCT : D-Type (3-State) Latches ti CY74FCT2574T, Octal Transparent D-type Latches With 3-State Outputs And Series Damping Resistors

INA2126E/250 : ti INA2126, Micropower Instrumentation Amplifier Single And Dual Versions

PT6652P : Plug-in Power Solutions->Non-Isolated->Single Posi ti PT6652, 2.5Vout 5Ap 24V-Input Adjustable Isr

SNJ54197J : ti SN54197, 50/30/100-Mhz Presettable Decade or Binary Counters/latches

TCM129C17N : Combined Single-chip PCM Codec And Filter

UCC37321 : Single 9-A High Speed Low-side MOSFET Driver With Enable

PTMA403033A1AZT : 10-w, 36-V to 75-V Input, 1500-v Isolation, Dc/dc Converters

SN55LBC180RSAR : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Line Transceiver Tape & Reel (TR) 4.75 V ~ 5.25 V; IC LINE DVR/RCVR DIFF PR 16QFN Specifications: Number of Drivers/Receivers: 1/1 ; Type: Line Transceiver ; Voltage - Supply: 4.75 V ~ 5.25 V ; Package / Case: 16-VQFN Exposed Pad ; Packaging: Tape & Reel (TR) ; Protocol: RS485 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

MSP430F6733IPZR : Embedded - Microcontroller Integrated Circuit (ics) Internal Tape & Reel (TR) 1.8 V ~ 3.6 V; IC MCU 16BIT 64KB FLASH 100LQFP Specifications: Program Memory Size: 64KB (64K x 8) ; RAM Size: 4K x 8 ; Number of I /O: 72 ; Package / Case: 100-LQFP ; Speed: 25MHz ; Oscillator Type: Internal ; Packaging: Tape & Reel (TR) ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: RISC ; Data Converters: A/D 8x10b, 3x24b

SN74CBT3305CDGKR : Dual Fet Bus Switch With -2 V Undershoot-protection

Same catergory

54ACTQ16541 : Military/Aerospace->FACT ACTQ. 54ACTQ16541 - 16-Bit Buffer/line Driver With Tri-state Outputs, Package: Cerpack, Pin Nb=48.

5962-87794012A : ti SN54AS805B, Hex 2-Input Nor Drivers. High Capacitive-Drive Capability ALS805A Has Typical Delay Time 4.2 ns (CL = 50 pF) and Typical Power Dissipation 4.2 mW Per Gate AS805B Has Typical Delay Time 2.6 ns (CL = 50 pF) and Typical Power Dissipation 12 mW Per Gate Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic.

AVGDV74LS174N : Hex D Type Flip Flop, Plastic Dip, Through Hole.

CD74FCT843A : CMOS/BiCMOS->FCT/FCT-T Family. Bicmos 9-bit Bus-interface D-type Latch With 3-state Outputs.

MAX13013 : 0.1A, 100Mbps, Level Translatorsthe MAX13013-MAX13017/MAX3023-MAX3028 Single-/ Dual-/quad-level Translators Provide The Level Shifting Necessary to Allow 100Mbps Data Transfer in a Multivoltage System. Externally Applied Voltages, VCC And VL, Set The Logic Levels on Either Side of The Device. Logic Signals Present on The VL Side of The Device Appear.

MC10E431 : Bipolar->ECL 10 Family. 3-bit Diff Set/reset Flip-flop. The a 3-bit flip-flop with differential clock, data input and data output. The asynchronous Set and Reset controls are edge-triggered rather than level controlled. This allows the user to rapidly set or reset the flip-flop and then continue clocking at the next clock edge, without the necessity of de-asserting the set/reset signal (as would be the case.

MC10H166FN : 5-Bit Magnitude Comparator , Package: Plcc, Pins=20. The a 5Bit Magnitude Comparator and is a functional/ pinout duplication of the standard MECL 10K part with 100% improvement in propagation delay and no increase in powersupply current. The is a highspeed expandable 5bit comparator for comparing the magnitude of two binary words. Two outputs are provided: A<B and A>B. The = B function can be obtained.

QS3306A : High-speed CMOS Dual Bus Switch With Individual Active Low Enables. IDTQS3306A HIGH-SPEED CMOS DUAL BUS SWITCH WITH INDIVIDUAL ENABLES QUICKSWITCH PRODUCTS HIGH-SPEED CMOS DUAL BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES Enhanced N channel FET with no inherent diode to Vcc Very low ON resistance (3 typical) Zero propagation delay, zero added ground bounce Fast turn-on/turn-off time Undershoot clamp diodes on all switch.

SL74HC00 : Quad 2-input NAND Gate. The SL74HC00 is identical in pinout to the LS/ALS00. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 6.0 V Low Input Current: 1.0 A High Noise Immunity Characteristic of CMOS Devices ORDERING INFORMATION.

SN54LS170 : 4 X 4 Register File Open-collector. The TTL / MSI is a high-speed, low-power x 4 Register File organized as four words by four bits. Separate read and write inputs, both address and enable, allow simultaneous read and write operation. Open-collector outputs make it possible to connect to 128 outputs in a wired-AND configuration to increase the word capacity to 512 words. Any number of these.

SN74ABT16853DGG : Dual 8-bit to 9-bit Parity Bus Transceivers. Members of the Texas Instruments Widebus TM Family State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) V at VCC = 25C Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise Flow-Through Architecture.

SN74ABT841ADB : 10-bit Bus-interface D-type Latches With 3-state Outputs. State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) V at VCC = 25C High-Impedance State During Power Up and Power.

SN74ALVCH16820DGGR : D-Type (3-State) Flip-Flops. ti SN74ALVCH16820, 3.3-V 10-Bit Flip-flop With Dual Outputs And 3-State Outputs.

SN74GTLP21395 : . SN74GTLP21395 TWO 1-BIT LVTTL-TO-GTLP ADJUSTABLE-EDGE-RATE BUS TRANSCEIVERS WITH SPLIT LVTTL PORT, FEEDBACK PATH, AND SELECTABLE POLARITY TI-OPC Circuitry Limits Ringing on Unevenly Loaded Backplanes OEC Circuitry Improves Signal Integrity and Reduces Electromagnetic Interference Bidirectional Interface Between GTLP Signal Levels and LVTTL Logic Levels.

TC74AC175FN : TC74AC Series. Function = Quad D-type Flip-flop With Clear ;; Pins = 16.

TC74HC4040AFN : TC74HC Series. Function = 12-stage Binary Counter ;; Pins = 16.

A2F500M3G-1CSH288 : FPGA, 11520 CLBS, 500000 GATES, PBGA288. s: System Gates: 500000 ; Logic Cells / Logic Blocks: 11520 ; Package Type: Other, 0.50 MM PITCH, HALOGEN FREE, CSP-288 ; Logic Family: CMOS ; Pins: 288 ; Operating Temperature: 0 to 85 C (32 to 185 F) ; Supply Voltage: 1.5V.

935268380118 : LVC/LCX/Z SERIES, 2-INPUT AND GATE, PDSO5. s: Gate Type: AND ; Supply Voltage: 1.8V ; Logic Family: CMOS ; Inputs: 2 ; Propagation Delay: 10.5 ns ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Pin Count: 5 ; IC Package Type: Other, PLASTIC, SC-88A, 5 PIN.

 
0-C     D-L     M-R     S-Z