Details, datasheet, quote on part number: SN74HC4066PWR
PartSN74HC4066PWR
CategorySemiconductors => Switches and Multiplexers => Analog Switches/Muxes
Part familySN74HC4066 Quadruple Bilateral Analog Switches
TitleAnalog Switches
DescriptionQuadruple Bilateral Analog Switches 14-TSSOP -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload SN74HC4066PWR datasheet
Cross ref.Similar parts: TC74HC4066AFT, M74HC4066TTR, MC74HC4066DTR2
Quote
Find where to buy
 
Specifications 
VIL(Max)(V)vcc*.2
Input/Output Continuous Current(Max)(mA)25
Operating Temperature Range(C)-40 to 85
Package GroupPDIP,SO,SOIC,SSOP,TSSOP
RatingCatalog
OFF-state leakage current(Max)(µA)5
Vss(Max)(V)N/A
ON-state leakage current(Max)(µA)5
ESD HBM(kV)1
Number of Channels(#)4
Ron(Max)(Ohms)150
Vdd(Max)(V)6
Vss(Min)(V)N/A
Bandwidth(Max)(MHz)30
Vdd(Min)(V)2
Approx. Price (US$)0.12 | 1ku
ESD Charged Device Model(kV)1
Input/Output ON-state Capacitance(Typ)(pF)3
VIH(Min)(V)vcc*.7
Bandwidth(MHz)30
Supply Current(Max)(uA)40
Supply Current(Typ)(uA)2
Supply Range(Max)6
Ron(Typ)(Ohms)30
Input/Output OFF-state Capacitance(Typ)(pF)9
Power Supply TypeSingle
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
14PWTSSOPR-PDSO-G2000LARGE T&RHC4066 4.451.65

 

Features, Applications

Wide Operating Voltage Range 6 V Typical Switch Enable Time 18 ns Low Power Consumption, 20-A Max ICC Low Input Current 1 A Max High Degree of Linearity High On-Off Output-Voltage Ratio Low Crosstalk Between Switches Low On-State Impedance. 50- TYP at VCC 6 V Individual Switch Controls

The is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes 6 V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. ORDERING INFORMATION

TA PDIP N SOIC to 85C SOP NS SSOP DB PACKAGE Tube of 25 Tube of 50 Reel of 2500 Reel of 250 Reel of 2000 Reel of 2000 Tube of 90 TSSOP PW Reel of 2000 Reel of 250 ORDERABLE PART NUMBER SN74HC4066PWT HC4066 TOP-SIDE MARKING SN74HC4066N

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (each switch) INPUT CONTROL (C) L H SWITCH OFF ON

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

logic diagram, each switch (positive logic)
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC (see Note 7 V Control-input diode current, II (VI VI > VCC). 20 mA I/O port diode current, II (VI 0 or VI/O > VCC). 20 mA On-state switch current (VI/O 0 to VCC). 25 mA Continuous current through VCC or GND. 50 mA Package thermal impedance, JA (see Note 2): D package. 86C/W DB package. 96C/W N package. 80C/W NS package. 76C/W PW package. 113C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltages are with respect to ground unless otherwise specified. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

VCC VI/O VIH Supply voltage I/O port voltage High-level input voltage, control inputs VCC 2 V VCC 4.5 V VCC 6 V VCC 2 V VIL Low-level input voltage, control inputs VCC 4.5 V VCC 6 V VCC 2 V VCC 4.5 V VCC 6 V MIN NOM 5 MAX 6 VCC ns V UNIT V

TA Operating free-air temperature 85 C With supply voltages at or near 2 V, the analog switch on-state resistance becomes very nonlinear. It is recommended that only digital signals be transmitted at these low supply voltages. NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER TEST CONDITIONS VCC 2V ron On-state switch resistance = 1 mA, to t VCC, VC = VIH (see Figure 6V 2V ron(p) ) II Isoff Ison ICC Cf Co Peak on-state resistance Control input current Off-state switch leakage current On-state switch leakage current Supply current Input capacitance Feed-through capacitance Output capacitance 0 5V GND VC = VIH, VI = VCC or GND, 0 or VCC VI = VCC VO = VCC VC = VIL (see Figure VI = VCC VC = VIH (see Figure 0 or VCC, = 25_C MIN TYP MAX A pF MIN MAX UNIT


 

Related products with the same datasheet
SN74HC4066DBLE
SN74HC4066DBR
SN74HC4066DR
SN74HC4066DT
SN74HC4066N
SN74HC4066NSR
SN74HC4066PW
SN74HC4066PWLE
SN74HC4066PWT
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC4066PWT ti SN74HC4066, Quadruple Bilateral Analog Switches
SN74HC4075 Triple 3-input OR GATEs
SN74HC4075D ti SN74HC4075, Triple 3-Input Positive-OR GATEs
SN74HC4078AD ti SN74HC4078A, 8-Input Or/nOR GATEs
SN74HC42 Bcd-to-decimal Decoder (1-of-10)
SN74HC42D ti SN74HC42, 4-Line to 10-Line Decoders (1 of 10)
SN74HC451 4-line to 16-line Decoders/demultiplexers With Address Latches
SN74HC4514DW ti SN74HC4514, 4-Line to 16-Line Decoders/demultiplexers With Address Latches
SN74HC4724 8-bit Addressable Latches
SN74HC4851 Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851D ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DGVR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DGVR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851N Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851N ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PW Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PW ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PWR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PWR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control

CD4508BM : ti CD4508B, CMOS Dual 4-Bit Latch

CD74HC158E : Multiplexers->CMOS/BiCMOS->HC/HCT Family High Speed CMOS Logic Quad 2-input Multiplexers

CY74FCT574T : CMOS/BiCMOS->FCT/FCT-T Family 8-bit Registers

LS614 : N.p.n. Planar Silicon Phototransistors

TLV320AIC14IDBT : Voice-Band Codecs ti TLV320AIC14, Single Channel Codec

TPS76316 :

THS3001HVID : 420-MHz Current-Feedback Amplifier The THS3001 is a high-speed current-feedback operational amplifier, ideal for communication, imaging, and high-quality video applications. This device offers a very fast 6500-V/s slew rate, a 420-MHz bandwidth, and 40-ns settling time for large-signal application

CD74AC623ME4 : Octal-bus Transceiver,3-state, Non-inverting

AM26C32INSRE4 : Quadruple Differntial LINE Receiver

TPIC6596DWG4 : Logic - Shift Register Integrated Circuit (ics) Shift Register Tube 4.5 V ~ 5.5 V; IC 8-BIT SHIFT REGISTER 20-SOIC Specifications: Logic Type: Shift Register ; Function: Serial to Parallel ; Number of Elements: 1 ; Number of Bits per Element: 8 ; Output Type: Standard ; Voltage - Supply: 4.5 V ~ 5.5 V ; Mounting Type: Surface Mount ; Package / Case: 20-SOIC (0.295", 7.50mm Width) ; Packaging: Tube ; Operating Te

TPS65191RHBR : Linear - Video Processing Integrated Circuit (ics) Surface Mount Cut Tape (CT); IC HI-VOLT SCAN DRIVER 7CH 32QFN Specifications: Mounting Type: Surface Mount ; Package / Case: 32-VFQFN Exposed Pad ; Type: Scan Driver ; Packaging: Cut Tape (CT) ; Applications: TFT-LCD Panels Scan Driver ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

TLV2462AQDRG4Q1 : ti TLV2462A, Dual Low-Power, Rail-to-rail Input/output Operational Amplifier

 
0-C     D-L     M-R     S-Z