Details, datasheet, quote on part number: SN74HC4066DT
PartSN74HC4066DT
CategorySemiconductors => Switches and Multiplexers => Analog Switches/Muxes
Part familySN74HC4066 Quadruple Bilateral Analog Switches
TitleAnalog Switches
DescriptionQuadruple Bilateral Analog Switches 14-SOIC -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload SN74HC4066DT datasheet
Quote
Find where to buy
 
Specifications 
VIL(Max)(V)vcc*.2
Input/Output Continuous Current(Max)(mA)25
Operating Temperature Range(C)-40 to 85
Package GroupPDIP,SO,SOIC,SSOP,TSSOP
RatingCatalog
OFF-state leakage current(Max)(µA)5
Vss(Max)(V)N/A
ON-state leakage current(Max)(µA)5
ESD HBM(kV)1
Number of Channels(#)4
Ron(Max)(Ohms)150
Vdd(Max)(V)6
Vss(Min)(V)N/A
Bandwidth(Max)(MHz)30
Vdd(Min)(V)2
Approx. Price (US$)0.12 | 1ku
ESD Charged Device Model(kV)1
Input/Output ON-state Capacitance(Typ)(pF)3
VIH(Min)(V)vcc*.7
Bandwidth(MHz)30
Supply Current(Max)(uA)40
Supply Current(Typ)(uA)2
Supply Range(Max)6
Ron(Typ)(Ohms)30
Input/Output OFF-state Capacitance(Typ)(pF)9
Power Supply TypeSingle
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
14DSOICR-PDSO-G250SMALL T&RHC4066 3.918.651.581.27

 

Features, Applications

Wide Operating Voltage Range 6 V Typical Switch Enable Time 18 ns Low Power Consumption, 20-A Max ICC Low Input Current 1 A Max High Degree of Linearity High On-Off Output-Voltage Ratio Low Crosstalk Between Switches Low On-State Impedance. 50- TYP at VCC 6 V Individual Switch Controls

The is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital signals. Each switch permits signals with amplitudes 6 V (peak) to be transmitted in either direction. Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems. ORDERING INFORMATION

TA PDIP N SOIC to 85C SOP NS SSOP DB PACKAGE Tube of 25 Tube of 50 Reel of 2500 Reel of 250 Reel of 2000 Reel of 2000 Tube of 90 TSSOP PW Reel of 2000 Reel of 250 ORDERABLE PART NUMBER SN74HC4066PWT HC4066 TOP-SIDE MARKING SN74HC4066N

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (each switch) INPUT CONTROL (C) L H SWITCH OFF ON

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

logic diagram, each switch (positive logic)
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC (see Note 7 V Control-input diode current, II (VI VI > VCC). 20 mA I/O port diode current, II (VI 0 or VI/O > VCC). 20 mA On-state switch current (VI/O 0 to VCC). 25 mA Continuous current through VCC or GND. 50 mA Package thermal impedance, JA (see Note 2): D package. 86C/W DB package. 96C/W N package. 80C/W NS package. 76C/W PW package. 113C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltages are with respect to ground unless otherwise specified. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

VCC VI/O VIH Supply voltage I/O port voltage High-level input voltage, control inputs VCC 2 V VCC 4.5 V VCC 6 V VCC 2 V VIL Low-level input voltage, control inputs VCC 4.5 V VCC 6 V VCC 2 V VCC 4.5 V VCC 6 V MIN NOM 5 MAX 6 VCC ns V UNIT V

TA Operating free-air temperature 85 C With supply voltages at or near 2 V, the analog switch on-state resistance becomes very nonlinear. It is recommended that only digital signals be transmitted at these low supply voltages. NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER TEST CONDITIONS VCC 2V ron On-state switch resistance = 1 mA, to t VCC, VC = VIH (see Figure 6V 2V ron(p) ) II Isoff Ison ICC Cf Co Peak on-state resistance Control input current Off-state switch leakage current On-state switch leakage current Supply current Input capacitance Feed-through capacitance Output capacitance 0 5V GND VC = VIH, VI = VCC or GND, 0 or VCC VI = VCC VO = VCC VC = VIL (see Figure VI = VCC VC = VIH (see Figure 0 or VCC, = 25_C MIN TYP MAX A pF MIN MAX UNIT


 

Related products with the same datasheet
SN74HC4066DBLE
SN74HC4066DBR
SN74HC4066DR
SN74HC4066N
SN74HC4066NSR
SN74HC4066PW
SN74HC4066PWLE
SN74HC4066PWR
SN74HC4066PWT
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC4066N ti SN74HC4066, Quadruple Bilateral Analog Switches
SN74HC4075 Triple 3-input OR GATEs
SN74HC4075D ti SN74HC4075, Triple 3-Input Positive-OR GATEs
SN74HC4078AD ti SN74HC4078A, 8-Input Or/nOR GATEs
SN74HC42 Bcd-to-decimal Decoder (1-of-10)
SN74HC42D ti SN74HC42, 4-Line to 10-Line Decoders (1 of 10)
SN74HC451 4-line to 16-line Decoders/demultiplexers With Address Latches
SN74HC4514DW ti SN74HC4514, 4-Line to 16-Line Decoders/demultiplexers With Address Latches
SN74HC4724 8-bit Addressable Latches
SN74HC4851 Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851D ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DGVR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DGVR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851N Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851N ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PW Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PW ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PWR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851PWR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control

84013022A : Standard Transceivers ti SN54ALS243A, Quadruple Bus Transceivers With 3-State Outputs

JM38510/30003BDA : ti SN54LS04, Hex Inverters

JM38510/37302BCA : ti SN54ALS27A, Triple 3-Input Positive-nOR GATEs

PT5822A : 2.5V 16A, 12-V Input Adjustable Step-down Isr

SNJ54ALS29823JT : D-Type (3-State) Flip-Flops ti SN54ALS29823, 9-Bit Bus-interface Flip-flops With 3-State Outputs

CY74FCT574TSOCE4 : 8-bit Registers WITH 3-state Outputs

INA226 : High-Side Measurement, Bi-Directional Current/Power Monitor w/I2C Interface The INA226 is a current shunt and power monitor with an I2C interface. The INA226 monitors both a shunt voltage drop and bus supply voltage. Programmable calibration value, conversion times, and averaging, combined with an internal multiplier, enable direct readouts of current in amperes and power i

SN74HC112DG4 : Logic - Flip Flop Integrated Circuit (ics) Surface Mount Tube 5.2mA, 5.2mA 2 V ~ 6 V; IC FLIP FLOP JK TYPE DUAL 16SOIC Specifications: Mounting Type: Surface Mount ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Function: Set(Preset) and Reset ; Number of Bits per Element: 1 ; Number of Elements: 2 ; Current - Output High, Low: 5.2mA, 5.2mA ; Output Type: Differential ; Trigger Type: Negative Edge ; Type: JK Type

TLC272BCPE4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Tube 1.9mA 3 V ~ 16 V, 1.5 V ~ 8 V; IC OPAMP GP 2.2MHZ DUAL 8DIP Specifications: Packaging: Tube ; Amplifier Type: General Purpose ; Number of Circuits: 2 ; Package / Case: 8-DIP (0.300", 7.62mm) ; Slew Rate: 5.3 V/s ; Gain Bandwidth Product: 2.2MHz ; Current - Supply: 1.9mA ; Current - Output / Channel: 30mA ; Voltage - Supply, Single/Dual (): 3 V ~ 16 V, 1.5

 
0-C     D-L     M-R     S-Z