Details, datasheet, quote on part number: SN74HC4060PW
PartSN74HC4060PW
CategorySemiconductors => Logic => Specialty Logic => Counter/Arithmetic/Parity Function
Part familySN74HC4060 14-Stage Asynchronous Binary Counters And Oscillators
Description14-Stage Asynchronous Binary Counters And Oscillators 16-TSSOP -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload SN74HC4060PW datasheet
Cross ref.Similar parts: 74HC4060PW, MC74HC4020ADT, MC74HC4020ADTR2, MC74HC4060ADT, MC74HC4060ADTR2, MC74HC4060DT, MC74HC4060DTR2, MC74HC4020ADTR2G, MC74HC4060ADTG, HD74HC4020T
Quote
Find where to buy
 
Specifications 
Voltage(Nom)(V)3.3,5
Output Drive (IOL/IOH)(Max)(mA)5.2/-5.2
ICC @ Nom Voltage(Max)(mA)0.08
F @ Nom Voltage(Max)(Mhz)28
TypeBinary
Operating Temperature Range(C)-40 to 85
Technology FamilyHC
Package GroupPDIP,SO,SOIC,SSOP,TSSOP
RatingCatalog
FunctionCounter
VCC(Max)(V)6
Approx. Price (US$)0.17 | 1ku
VCC(Min)(V)2
tpd @ Nom Voltage(Max)(ns)105
Bits(#)14
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
16PWTSSOPR-PDSO-G90TUBEHC4060 4.451.65

 

Features, Applications

Wide Operating Voltage Range 6 V Outputs Can Drive To 10 LSTTL Loads Low Power Consumption, 80-A Max ICC Typical tpd 14 ns

D 4-mA Output Drive V D Low Input Current 1 A Max D Allow Design of Either RC- or

The 'HC4060 devices consist of an oscillator section and 14 ripple-carry binary counter stages. The oscillator configuration allows design of either RC- or crystal-oscillator circuits. A high-to-low transition on the clock (CLKI) input increments the counter. A high level at the clear (CLR) input disables the oscillator (CLKO goes high and CLKO goes low) and resets the counter to zero (all Q outputs low). ORDERING INFORMATION

TA PDIP - N PACKAGE Tube of 25 Tube of 40 SOIC to 85C SOP - NS SSOP - DB Reel of 2500 Reel of 250 Reel of 2000 Reel of 2000 Tube of 90 TSSOP - PW CDIP to 125C CFP - W Reel of 2000 Reel of 250 Tube of 25 Tube of 150 ORDERABLE PART NUMBER SNJ54HC4060W HC4060 TOP-SIDE MARKING SN74HC4060N

LCCC - FK Tube 55 SNJ54HC4060FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

On products compliant to MILPRF38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

FUNCTION TABLE (each buffer) INPUTS CLK X CLR L H FUNCTION No change Advance to next stage All outputs L

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input clamp current, IIK (VI VI > VCC) (see Note 20 mA Output clamp current, IOK (VO VO > VCC) (see Note 20 mA Continuous output current, IO (VO 0 to VCC). 25 mA Package thermal impedance, JA (see Note 2): D package. 73C/W DB package. 82C/W N package. 67C/W NS package. 64C/W PW package. 108C/W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

SN54HC4060 MIN VCC VIH Supply voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 2 V VIL VI VO t/v Low-level input voltage Input voltage Output voltage VCC 2 V VCC 4.5 V VCC 6 V VCC 4.5 V VCC 6 V VCC NOM 5 MAX 6 SN74HC4060 MIN VCC 400 ns NOM 5 MAX 6 UNIT V

TA Operating free-air temperature C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER TEST CONDITIONS VCC 2V All outputs VOH Q outputs VI = VIH or VIL IOH -4 mA IOH -5.2 mA IOL 20 A IOL 4 mA IOL VI = VIH or VIL, IOH 6V 2V All outputs VOL Q outputs II ICC VI = VIH or VIL VI = VCC VI = VCC VI = VIH or VIL, = 25C MIN TYP MAX SN54HC4060 MIN MAX SN74HC4060 MIN pF V MAX UNIT


 

Related products with the same datasheet
SN74HC4060DBR
SN74HC4060DR
SN74HC4060DT
SN74HC4060N
SN74HC4060NSR
SN74HC4060PWR
SN74HC4060PWT
SN74HC4060DBRG4
SN74HC4060DG4
SN74HC4060DRG4
SN74HC4060DTG4
Some Part number from the same manufacture Texas Instruments, Inc.
SN74HC4060PWR ti SN74HC4060, 14-Stage Asynchronous Binary Counters And Oscillators
SN74HC4061 Asynchronous 14-stage Binary Counters And Oscillators
SN74HC4061N ti SN74HC4061, 14-Stage Asynchronous Binary Counters And Oscillators
SN74HC4066 Quad Bilateral Analog Switch
SN74HC4066D ti SN74HC4066, Quadruple Bilateral Analog Switches
SN74HC4066DB Quadruple Bilateral Analog Switch
SN74HC4066DBLE ti SN74HC4066, Quadruple Bilateral Analog Switches
SN74HC4075 Triple 3-input OR GATEs
SN74HC4075D ti SN74HC4075, Triple 3-Input Positive-OR GATEs
SN74HC4078AD ti SN74HC4078A, 8-Input Or/nOR GATEs
SN74HC42 Bcd-to-decimal Decoder (1-of-10)
SN74HC42D ti SN74HC42, 4-Line to 10-Line Decoders (1 of 10)
SN74HC451 4-line to 16-line Decoders/demultiplexers With Address Latches
SN74HC4514DW ti SN74HC4514, 4-Line to 16-Line Decoders/demultiplexers With Address Latches
SN74HC4724 8-bit Addressable Latches
SN74HC4851 Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851D ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DGVR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DGVR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DR Q1 - Automotive Catalog 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control
SN74HC4851DR ti SN74HC4851, 8-Channel Analog Multiplexer/demultiplexer With Injection-current Effect Control

5962-9564201QRA : Standard Transceivers ti SN54LVTH245A, 3.3-V Abt Octal Bus Transceivers With 3-State Outputs

JM38510/37301BCA : ti SN54ALS02A, Quadruple 2-Input Positive-nOR GATEs

MSP430FW425IPMR : Ultra-Low Power Microcontrollers ti MSP430FW425, 16-bit Risc Ultra-low-power Microcontroller For Electronic Flow Meters

TM248GBK32U-60 : ti TM248GBK32U, 2 097 152 BY 32-Bit Dynamic RAM Modules

TMS320C53PQ57 : TMS320 Family->TMS320C5X Fixed Point DSP ti TMS320C53, Digital Signal Processor

BQ27510DRZT-G1 : System-side Impedance Track Fuel Gauge With Direct Battery Connection

SN75179BDE4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Transceiver Tube 4.75 V ~ 5.25 V; IC DIFF LINE DRVR/RCVR 8-SOIC Specifications: Number of Drivers/Receivers: 1/1 ; Type: Transceiver ; Voltage - Supply: 4.75 V ~ 5.25 V ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Protocol: RS422, RS485 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

TLV2244IPWG4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Tube 1A 2.5 V ~ 12 V, 1.25 V ~ 6 V; IC OPAMP GP R-R 5.5KHZ 14TSSOP Specifications: Packaging: Tube ; Amplifier Type: General Purpose ; Number of Circuits: 4 ; Package / Case: 14-TSSOP (0.173", 4.40mm Width) ; Slew Rate: 0.002 V/s ; Gain Bandwidth Product: 5.5kHz ; Current - Supply: 1A ; Current - Output / Channel: 200A ; Voltage - Supply, Single/Dual (): 2.5 V

DAC8831IDG4 : SERIAL INPUT LOADING, 1 us SETTLING TIME, 16-BIT DAC, PDSO14 Specifications: Package Type: SOIC, PLASTIC, SOIC-14 ; Screening Level: Industrial ; Pins: 14 ; Operating Temperature: -40 to 85 C (-40 to 185 F)

 
0-C     D-L     M-R     S-Z