Details, datasheet, quote on part number: SN74ABT273PWLE
PartSN74ABT273PWLE
CategoryLogic => Flip-Flops => D-Type Flip-Flops
TitleD-Type Flip-Flops
Descriptionti SN74ABT273, Octal Edge-triggered D-type Flip-flops With Clear
CompanyTexas Instruments, Inc.
DatasheetDownload SN74ABT273PWLE datasheet
Cross ref.Similar parts: 74ABT273, 74ABT273CMTC
Quote
Find where to buy
 
  

 

Features, Applications
SN54ABT273, SN74ABT273 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR

State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) V at VCC = 25°C High-Drive Outputs (­32-mA IOH, 64-mA IOL) Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), Plastic (N) and Ceramic (J) DIPs, and Ceramic Flat (W) Package

description

The 'ABT273 are 8-bit positive-edge-triggered D-type flip-flops with a direct clear (CLR) input. They are particularly suitable for implementing buffer and storage registers, shift registers, and pattern generators. Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock (CLK) input is at either the high or low level, the D input signal has no effect at the output.

The SN54ABT273 is characterized for operation over the full military temperature range to 125°C. The SN74ABT273 is characterized for operation from to 85°C.

FUNCTION TABLE (each flip-flop) INPUTS CLR CLK H or OUTPUT Q0

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. EPIC-B is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input voltage range, VI (see Note 7 V Voltage range applied to any output in the high or power-off state, VO. 5.5 V Current into any output in the low state, IO: 128 mA Input clamp current, IIK (VI ­18 mA Output clamp current, IOK (VO ­50 mA Package thermal impedance, JA (see Note 2): DB package. 115°C/W DW package. 97°C/W N package. 67°C/W PW package. 128°C/W Storage temperature range, Tstg. to 150°C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. The package thermal impedance is calculated in accordance with EIA/JEDEC Std JESD51, except for through-hole packages, which use a trace length of zero.

SN54ABT273 MIN VCC VIH VIL VI IOH IOL t/v Supply voltage High-level input voltage Low-level input voltage Input voltage High-level output current Low-level output current Input transition rise or fall rate VCC MAX 5.5 SN74ABT273 MIN 2 0.8 VCC MAX 5.5 UNIT mA ns/V °C

TA Operating free-air temperature NOTE 3: Unused inputs must be held high or low to prevent them from floating.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER VIK VCC 4.5 V, VCC 4.5 V, VCC 5 V, VCC 4.5 5V VOL Vhys II Ioff ICEX IO ICC ICC¶ VCC 4.5 5V TEST CONDITIONS ­18 mA IOH ­3 mA IOH ­3 mA IOH ­24 mA IOH ­32 mA IOL 48 mA IOL mA 100 VCC 5.5 V, VCC = 0, VCC 5.5 V, VCC VI = VCC or GND 2.5 V Outputs high ­50 Outputs high Outputs low MIN = 25°C TYP MAX pF SN54ABT273 MIN MAX V SN74ABT273 MIN MAX ­1.2 UNIT V

* On products compliant to MIL-PRF-38535, this parameter does not apply. All typical values are at VCC 5 V. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. § This data sheet limit may vary among suppliers. ¶ This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND.


 

Related products with the same datasheet
SN74ABT273DBR
SN74ABT273DW
SN74ABT273DWR
SN74ABT273N
SN74ABT273NSR
SN74ABT273PW
SN74ABT273PWR
Some Part number from the same manufacture Texas Instruments, Inc.
SN74ABT273PWR ti SN74ABT273, Octal Edge-triggered D-type Flip-flops With Clear
SN74ABT2827 10-bit Buffer/driver With 3-state Outputs
SN74ABT2827DW ti SN74ABT2827, 10-Bit Buffers/drivers With 3-State Outputs
SN74ABT2952A Octal Bus Transceiver And Register With 3-state Outputs
SN74ABT2952ADB Octal Bus Transceivers And Registers With 3-state Outputs
SN74ABT2952ADBLE ti SN74ABT2952A, Octal Bus Transceivers And Registers With 3-State Outputs
SN74ABT2952APW Octal Bus Transceivers And Registers With 3-state Outputs
SN74ABT32245 36-bit Bus Transceivers With 3-state Outputs
SN74ABT32245PZ ti SN74ABT32245, 36-Bit Bus Transceivers With 3-State Outputs
SN74ABT32316 16-bit Tri-port Universal Bus Exchangers
SN74ABT32316PN ti SN74ABT32316, 16-Bit Tri-port Universal Bus Exchangers
SN74ABT32318 18-bit Tri-port Universal Bus Exchangers
SN74ABT32318PN ti SN74ABT32318, 18-Bit Tri-port Universal Bus Exchangers
SN74ABT32501 36-bit Universal Bus Transceivers With 3-state Outputs
SN74ABT32501PZ ti SN74ABT32501, 36-Bit Universal Bus Transceivers With 3-State Outputs
SN74ABT32543 36-bit Registered Bus Transceivers With 3-state Outputs
SN74ABT32543PZ ti SN74ABT32543, 36-Bit Registered Bus Transceivers With 3-State Outputs
SN74ABT328D ti SN74ABT328, SN74ABT328
SN74ABT328DBLE
SN74ABT328DR
SN74ABT329D ti SN74ABT329, 1-Line to 6-Line Clock Driver

PT79SR115 : Non-Isolated DC-DC Converters

SN74LS377DW : D-Type Flip-Flops ti SN74LS377, Octal D-type Flip-flops With Clock Enable

20413 : Snap-action Automatic and Manual Reset Fixed Temperature Thermostats

SN74ACT00DRE4 : Quadruple 2-input Exclusive-or Gates

CD4724BNSRG4 : Logic - Latch Integrated Circuit (ics) D-Type, Addressable Tape & Reel (TR) 6.8mA, 6.8mA 3 V ~ 18 V; IC 8BIT ADDRESSBL LATCH 16-SOP Specifications: Logic Type: D-Type, Addressable ; Independent Circuits: 1 ; Circuit: 1 8 ; Output Type: Standard ; Current - Output High, Low: 6.8mA, 6.8mA ; Mounting Type: Surface Mount ; Package / Case: 16-SOIC (0.209", 5.30mm Width) ; Packaging: Tape & Reel (TR) ; Operating Temperature: -55°C

LM3S9781-IQC80-C5T : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 1.08 V ~ 3.6 V; IC ARM CORTEX MCU 128KB 100LQFP Specifications: Program Memory Size: 128KB (128K x 8) ; RAM Size: 64K x 8 ; Number of I /O: 65 ; Package / Case: 100-LQFP ; Speed: 80MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: ARM® Cortex™-M3 ; Data Converters: A/D 16x10b ; Core

74ACT11373NTE4 : D-Type (3-State) Latches ti 74ACT11373, Octal Transparent D-type Latches With 3-State Outputs

TPS2590RSAT : Pmic - Hot Swap Integrated Circuit (ics) Hot-Swap Switch Tape & Reel (TR) 5A 3 V ~ 20 V; IC PWR MGR HOTSWAP 3-20V 16QFN Specifications: Applications: General Purpose ; Type: Hot-Swap Switch ; Package / Case: 16-VQFN Exposed Pad ; Packaging: Tape & Reel (TR) ; Current Limit: 5A ; Internal Switch(s): Yes ; Operating Temperature: -40°C ~ 125°C ; Voltage - Supply: 3 V ~ 20 V ; Lead Free Status: Lead Free ; RoHS Statu

CSD83325L : CSD83325L, Dual N-Channel NexFET™ Power MOSFETs This 12 V, 9.9 mΩ, 2.2 mm × 1.15 mm LGA Dual NexFET™ power MOSFET is designed to minimize resistance and gate charge in a small footprint. Its small footprint and common drain configuration make the device ideal for battery pack applications in small handheld devices. Common Drain Configuratio

 
0-C     D-L     M-R     S-Z