Details, datasheet, quote on part number: SN54ALS645A
PartSN54ALS645A
CategorySemiconductors => Space & High Reliability => Logic Products => Buffers/Drivers/Transceivers => Transceivers
Part familySN54ALS645A Octal Bus Transceivers With 3-State Outputs
TitleBus Oriented Circuits
DescriptionOctal Bus Transceivers With 3-State Outputs 20-CDIP -55 to 125
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSSee ti.com
SampleNo
DatasheetDownload SN54ALS645A datasheet
Cross ref.Similar parts: SN74LS366AJD, SN74LS366AJDS, SN74LS366AJS, SN74LS366AN, SN74LS366AND, SN74LS366ANDS, SN74LS366ANS, SN74LS368AD, SN74LS368ADR2, SN74LS368AJD
Quote
Find where to buy
 
Specifications 
Technology FamilyALS
Package GroupCDIP,CFP
Bits(#)8
Schmitt TriggerNo
RatingMilitary
Operating Temperature Range(C)-55 to 125
VCC(Max)(V)5.5
VCC(Min)(V)4.5
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
20JCDIPR-GDIP-T1TUBESNJ54ALS645AJ 6.9224.24.572.54
Application notes
• Input and Output Characteristics of Digital Integrated Circuits
This report contains a comprehensive collection of the input and output characteristic curves of typical integrated circuits from various logic families. These curves go beyond the information given in data sheets by providing additional details regarding | Doc
• Advanced Schottky (ALS and AS) Logic Families
This document introduces the advanced Schottky family of clamped TTL integrated circuits (ICs). Detailed electrical characteristics of the 'AS and 'ALS devices with table formats are provided. Guidelines for designing high-performance digital systems using | Doc
• Live Insertion
Many applications require the ability to exchange modules in electronic systems without removing the supply voltage from the module (live insertion). For example an electronic telephone exchange must always remain operational even during module maintenance | Doc
• Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)
The spectrum of bus-interface devices with damping resistors or balanced/light output drive currently offered by various logic vendors is confusing at best. Inconsistencies in naming conventions and methods used for implementation make it difficult to iden | Doc
• Designing With Logic (Rev. C)
Data sheets, which usually give information on device behavior only under recommended operating conditions, may only partially answer engineering questions that arise during the development of systems using logic devices. However, information is frequently | Doc

 

Features, Applications

Bidirectional Bus Transceivers in High-Density 20-Pin Packages True Logic 3-State Outputs Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs

description

These octal bus transceivers are designed for asynchronous two-way communication between data buses. These devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. The -1 version of the SN74ALS645A is identical to the standard version, except that the recommended maximum IOL is increased to 48 mA. There no -1 version of the SN54ALS645A. The SN54ALS645A and SN54AS645 are characterized for operation over the full military temperature range to 125C. The SN74ALS645A and SN74AS645 are characterized for operation from to 70C.

FUNCTION TABLE INPUTS L H DIR H X OPERATION B data to A bus A data to B bus Isolation

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage, VCC. 7 V Input voltage, VI: All inputs. 7 V I/O ports. 5.5 V Operating free-air temperature range, TA: to 70C Storage temperature range. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

SN54ALS645A MIN VCC VIH VIL IOH IOL Supply voltage High-level input voltage Low-level input voltage High-level output current Low level output current Low-level NOM 5 MAX 5.5 SN74ALS645A MIN NOM 5 MAX 5.5 UNIT mA C

TA Operating free-air temperature Applies only to the -1 version and only if VCC is between 4.75 V and 5.25 V

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

Outputs disabled All typical values are at VCC = 25C. Applies only to the -1 version and only if VCC is between 4.75 V and V For I/O ports, the parameters IIH and IIL include the off-state output current. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.

VCC = 50 pF, TA = MIN to MAX# SN54ALS645A MIN tPLH tPHL tPZH tPZL tPHZ tPLZ OE 2 MAX SN74ALS645A MIN MAX ns

# For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.


 

Some Part number from the same manufacture Texas Instruments, Inc.
SN54ALS645AFK Octal Bus Transceivers With 3-state Outputs
SN54ALS645AJ ti SN54ALS645A, Octal Bus Transceivers With 3-State Outputs
SN54ALS646
SN54ALS646FK Octal Bus Transceivers And Registers With 3-state Outputs
SN54ALS648
SN54ALS648FK Octal Bus Transceivers And Registers With 3-state Outputs
SN54ALS652
SN54ALS652FK Octal Bus Transceivers And Registers With 3-state Outputs
SN54ALS652JT ti SN54ALS652, Octal Bus Transceivers And Registers With 3-State Outputs
SN54ALS653
SN54ALS653FK Octal Bus Transceivers And Registers With 3-state Outputs
SN54ALS688
SN54ALS688FK 8-bit Identity Comparators
SN54ALS688J ti SN54ALS688, 8-Bit Identity Comparators
SN54ALS74A
SN54ALS74AFK Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset
SN54ALS74AJ ti SN54ALS74A, Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset
SN54ALS804A
SN54ALS804AFK Hex 2-input NAND Drivers
SN54ALS804AJ ti SN54ALS804A, Hex 2-Input NAND Drivers
SN54ALS805A Hex 2-input Nor Drivers

CD74HC161E : ti CD74HC161, High Speed CMOS Logic 4-Bit Binary Counter With Asynchronous Reset

PT5541N : 12V 1A, 5-V Input Step-up (Boost) Isr

PT6719N : 1.2V 13A 5V/3.3V-Input Adjustable Isr

SN74ALS00ADBR : ti SN74ALS00A, Quadruple 2-Input Positive-nand Gates

SN74LVC827PWLE : Non-Inverting Buffers and Drivers ti SN74LVC827, 10-Bit Buffer/driver With 3-State Outputs

THS4061ID : ti THS4061, 180-MHz High Output Drive Voltage-feedback Amplifier

SN74LS05DRE4 : Quadruple 2-input Positive-and Gates

MSP430F47186IPZR : Mixed Signal Microcontroller

MSP430F5509IZQER : Embedded - Microcontroller Integrated Circuit (ics) Internal Cut Tape (CT) 1.8 V ~ 3.6 V; IC MCU 16BIT 24KB FLASH 48VQFN Specifications: Program Memory Size: 24KB (24K x 8) ; RAM Size: 6K x 8 ; Number of I /O: 31 ; Package / Case: 48-VFQFN Exposed Pad ; Speed: 25MHz ; Oscillator Type: Internal ; Packaging: Cut Tape (CT) ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: RISC ; Data Converters: A/D 8x10b ;

SN74AS258NSRE4 : Multiplexers ti SN74AS258, Quadruple 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs

TPS54360DDA : Conv DC-DC Single Step Down 4.5V to 60V 8-Pin HSOP EP T/R The TPS54360 supports higher output currents with higher efficiency.

Same catergory

AV16374DGG : 2.5v/3.3v 16-bit Edge-triggered D-type Flip-flop 3-state. Product Supersedes data of 1998 Feb 13 IC23 Data Handbook 1999 Oct 18 16-bit edge-triggered flip-flop 5V I/O compatibile 3-State buffers Output capability: +64mA/-32mA TTL input and output switching levels Input and output interface capability to systems at 5V supply Bus-hold data inputs eliminate the need for external pull-up The is a high-performance.

CD4050BD : Non-Inverting Buffers and Drivers. ti CD4050B, CMOS Hex Non-inverting Buffer/converter.

CD74HCT147E : Priority Encoders. ti CD74HCT147, High Speed CMOS Logic 10-to-4 Line Priority Encoder.

MC74HC393 : CMOS/BiCMOS->HC/HCT Family. Dual 4-stage Binary Ripple Counter. The MC54/74HC393 is identical in pinout to the LS393. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device consists of two independent 4bit binary ripple counters with parallel outputs from each counter stage. 256 counter can be obtained by cascading the two binary.

N74F2953A : Registered Transceiver, Non-inverting 3-state. 74F2952 Registered transceiver, non-inverting (3-State) 74F2953 Registered transceiver, inverting (3-State) Registered transceiver, non-inverting (3-State) Registered transceiver, inverting (3-State) The 74F2952 and 74F2953 are 8-bit registered transceivers. Two 8-bit back-to-back registers store data flowing in both directions between two bi-directional.

SN54BCT8373A : CMOS/BiCMOS->ABT/BCT Family. Scan Test Devices With Octal D-type Latches.

SN74ABT16853 : Bus Oriented Circuits. Dual 8-bit to 9-bit Parity Bus Transceiver. Members of the Texas Instruments Widebus TM Family State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) V at VCC = 25C Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise Flow-Through Architecture.

SN74AHC240DB : Octal Buffers/drivers With 3-state Outputs. EPIC TM (Enhanced-Performance Implanted CMOS) Process Operating Range to 5.5-V VCC Latch-Up Performance Exceeds 250 mA Per JESD 17 Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), Thin Very Small-Outline (DGV), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic.

SN74ALS29854 : Bipolar->ALS Family. 8-bit to 9-bit Parity Bus Transceiver. Functionally Similar to AMD's AM29854 High-Speed Bus Transceiver With Parity Generator/Checker Parity-Error Flag With Open-Collector Outputs Latch for Storing the Parity-Error Flag Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (NT) 300-mil DIPs The to 9-bit parity 11 14 transceiver designed for two-way communication.

SN74ALVCH16820DGG : 3.3-v 10-bit Flip-flop With Dual Outputs And 3-state Outputs. Member of the Texas Instruments Widebus TM Family EPIC TM (Enhanced-Performance Implanted CMOS) Submicron Process ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 250 mA Per JESD 17 Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors.

SY10/100EL04 : . 240ps propagation delay High bandwidth output transitions Internal 75K input pull-down resistors Available in 8-pin SOIC package The SY10/100EL04 are 2-input AND/NAND gates. These devices are functionally equivalent to the E104 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster than.

TC74AC534F : CMOS/BiCMOS->AC/ACT Family. Octal D-type Flip-flop With 3-state Output.

HMC-C064 : 50 Gbps, XOR / XNOR Module The HMC-C064 is a XOR/XNOR gate function designed to support data transmission rates of up to 50 Gbps. All input signals to the HMC-C064 are terminated with 50 Ohms to ground on-chip, and may be either AC or DC coupled. The differential outputs of the HMC-C064 may be either AC or DC coupled. Outputs can be connected directly.

A2F200M3D-CS288YI : FPGA, 4608 CLBS, 200000 GATES, PBGA288. s: System Gates: 200000 ; Logic Cells / Logic Blocks: 4608 ; Package Type: Other, 0.50 MM PITCH, CSP-288 ; Logic Family: CMOS ; Pins: 288 ; Supply Voltage: 1.5V.

AV16260DGG-T : ALVT SERIES, MULTIPLEXER AND DEMUX/DECODER, PDSO56. s: Output Characteristics: 3-State ; Supply Voltage: 2.5V ; Logic Family: BICMOS ; Number of Pins: 56 ; Operating Temperature: -40 to 85 C (-40 to 185 F).

TC7WZ34FU(TE12L,F) : LVC/LCX/Z SERIES, TRIPLE 1-INPUT NON-INVERT GATE, PDSO8. s: Gate Type: NON-INVERT ; Supply Voltage: 3V ; Logic Family: CMOS ; Inputs: 1 ; Propagation Delay: 10 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Pin Count: 8 ; IC Package Type: SSOP, Other, 0.65 MM PITCH, PLASTIC, SSOP-8.

 
0-C     D-L     M-R     S-Z