|Category||Analog & Mixed-Signal Processing => Comparators|
|Description||8-bit Identity Comparators|
|Company||Texas Instruments, Inc.|
|Datasheet||Download SN54ALS520FK datasheet
Compare Two 8-Bit Words Choice of Totem-Pole or Open-Collector Outputs SN74ALS518 and ALS520 Have 20-k Pullup Resistors on Q Inputs Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPsINPUT PULLUP RESISTOR Yes OUTPUT FUNCTION AND CONFIGURATION = Q open collector
These identity comparators perform comparisons on two 8-bit binary or BCD words. The SN74ALS518 provides = Q outputs, while the ALS520 and SN74ALS521 provide = Q outputs. The SN74ALS518 has an open-collector output. The SN74ALS518 and ALS520 feature 20-k pullup resistors on the Q inputs for analog or switch data. The SN54ALS520 is characterized for operation over the full military temperature range to 125°C. The SN74ALS518, SN74ALS520, and SN74ALS521 are characterized for operation from to 70°C.FUNCTION TABLE INPUTS DATA P, Q P=Q P>Q P<Q X ENABLE OUTPUTS P=Q
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
|Some Part number from the same manufacture Texas Instruments, Inc.|
|SN54ALS520J ti SN54ALS520, 8-Bit Identity Comparators|
|SN54ALS534A Octal D-type Edge-triggered Flip-flops With 3-state Outputs|
|SN54ALS534J ti SN54ALS534, Octal D-type Edge-triggered Flip-flops With 3-State Outputs|
|SN54ALS541FK Octal Buffers And Line Drivers With 3-state Outputs|
|SN54ALS541J ti SN54ALS541, Octal Buffers And Line Drivers With 3-State Outputs|
|SN54ALS561A Synchronous 4-bit Counters With 3-state Outputs|
|SN54ALS563A Octal D-type Transparent Latches With 3-state Outputs|
|SN54ALS563BJ ti SN54ALS563B, Octal D-type Transparent Latches With 3-State Outputs|
|SN54ALS563BW Octal D-type Transparent Latches With 3-state Outputs|
|SN54ALS564AJ ti SN54ALS564A, Octal D-type Edge-triggered Flip-flops With 3-State Outputs|
|SN54ALS564B Octal D-type Edge-triggered Flip-flop With 3-state Outputs|
|SN54ALS564BFK Octal D-type Edge-triggered Flip-flops With 3-state Outputs|
|SN54ALS564BJ ti SN54ALS564B, Octal D-type Edge Triggered Flip-flops With 3-state Outputs|
|SN54ALS564BW Octal D-type Edge-triggered Flip-flops With 3-state Outputs|
|SN54ALS569AFK Synchronous 4-bit Up/down Decade And Binary Counters With 3-state Outputs|
|SN54ALS569AJ ti SN54ALS569A, Synchronous 4-Bit Up/down Binary Counters With 3-State Outputs|
SN74ACT7200L35RJ : Asynchronous FIFOs ti SN74ACT7200L, 256 X 9 Asynchronous Fifo Memory
SN74F377AN : D-Type Flip-Flops ti SN74F377A, Octal D-type Flip-flop With Clock Enable
SN74HC04PWT : ti SN74HC04, Hex Inverters
VCA2616YT : Variable Gain ti VCA2616, Dual, Variable Gain Amlifier W/low Noise Pre-amp
SN74LV8153PWE4 : Quadruple 2-input Exclusive-or Gates
AM26LV31ID : Low-voltage High-speed Quadruple Differential LINE Receiver
TPS60403DBVTG4 : Unregulated 60-ma Charge PUMP Voltage Inverter
CD74AC151M96G4 : Multiplexers ti CD74AC151, 8-Input Multiplexer
TPS54526 : 4.5V To 18V Input, 5.5-A Synchronous Step-Down Converter With D-CAP2 Mode & Auto-Skip Eco-Mode The TPS54526 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54526 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effecti
AD1864N-J : Complete Dual 18-bit Audio DAC. Dual Serial Input, Voltage Output DACs No External Components Required Operates at 8 Oversampling per Channel 12 V Operation Cophased Outputs 115 dB Channel Separation 0.3% Interchannel Gain Matching 0.0017% THD+N APPLICATIONS Multichannel Audio Applications: Compact Disc Players Multivoice Keyboard Instruments DAT Players and Recorders Digital Mixing.
KIT33880DWBEVB : Configurable Octal Serial Switch With Serial Peripheral Interface I/o.
KM416V4104B : 4m X 16bit CMOS Dynamic RAM With Extended Data Out. This is a family x 16 bit Extended Data Out Mode CMOS DRAMs. Extended Data Out Mode offers high speed random access of memory cells within the same row. Refresh cycle(4K Ref. or 8K Ref.), access time or -6), power consumption(Normal or Low power) are optional of this family. All of this family have CAS-before-RAS refresh, RAS-only refresh and Hidden.
LC508 : Class a Amplifier With 3 Independent Gain Blocks, 5V DC. Class A Amplifier with 3 Independent Gain Blocks 1 µV input referred noise to 5 VDC operating range 73 dB typical gain (adjustable) 2.0 mA range of transducer current 1% electrical distortion the first and second blocks, or second and third blocks can be DC coupled to 50 kHz frequency response suitable for active filtering STANDARD PACKAGING 10 PIN MICROpac10.
MAX4645 : Fast, Low-Voltage, 2.5, Spst, CMOS Analog Switches. Fast, Low-Voltage, 2.5, SPST, CMOS Analog Switches The MAX4645/MAX4646 single-pole, single-throw (SPST) analog switches feature a 2.5 typical on-resistance (RON) from a +5V supply. RON is flat (0.4 max) over the specified signal range. Each switch can handle Rail-toRail® analog signals. Off-leakage current is 0.25nA max at +25°C. These analog switches.
OPA2353EA/250 : ti OPA2353, High-Speed, Single-Supply, Rail-to-rail Operational Amplifiers MicroAmplifier(TM) Series.
SAA5667 : Enhanced TV Microcontrollers With On-screen Display Osd. SAA56xx Enhanced TV microcontrollers with On-Screen Display (OSD) Product Supersedes data of 2001 Feb 13 File under Integrated Circuits, IC02 2001 Dec 13 Enhanced TV microcontrollers with On-Screen Display (OSD) CONTENTS GENERAL QUICK REFERENCE DATA ORDERING INFORMATION BLOCK DIAGRAM PINNING INFORMATION MICROCONTROLLER MEMORY ORGANISATION POWER-ON RESET.
TC1027COR : Linear Building Block - Quad Low Power Comparator And Voltage Reference.
UCC2918 : Power. Low On-resistance Hot Swap Power Manager. D Integrated 0.075- Power MOSFET 6 V Operation D External Analog Control of Fault Current From 4 A Independent Analog Control of Current Limit 5 A Fast Overload Protection Unidirectional Switch Minimal External Components 1-µA ICC When Disabled Programmable On Time Programmable Start Delay Fixed 3% Duty Cycle Pin 5 serves as the lowest impedance to the electrical.
UTCM2115 : = Dual Operational Amplifier (12MHz Dual OP) ;; Package = DIP-8, SOP-8, TSSOP-8 ;;.
VCA2618 : Dual, Variable Gain Amplifier With Input Buffer. Dual, VARIABLE GAIN AMPLIFIER with Input Buffer GAIN RANGE: 43dB 30MHz BANDWIDTH LOW CROSSTALK: 65dB at Max Gain, 5MHz HIGH-SPEED VARIABLE GAIN ADJUST POWER SHUTDOWN MODE HIGH IMPEDANCE INPUT BUFFER The is a highly integrated, dual receive channel, Variable Gain Amplifier (VGA) with analog gain control. The VCA2618's VGA section consists of two parts:.
X9118 : Single Digitally-controlled Xdcp, Serial Two-wire Interface, Dual Supply.
LTC6401CUD-8#TRPBF : 1.3GHz Low Noise, Low Distortion Differential ADC Driver For 140MHz IF The LTC6401-20 is a high-speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose broadband gain block. The LTC6401-20.
AD8260 : High Current Driver Amplifier And Digital VGA/Preamplifier With 3 DB Steps The AD8260 includes a high current driver, usable as a transmitter, and a low noise digitally programmable variable gain amplifier (DGA), useable as a receiver. The receiver section consists of a single-ended input preamplifier, and linear-in-dB, differential-output DGA. The receiver.
MCP6291 : Op Amps Rail-to-Rail Input/Output. Gain Bandwidth Product: 10 MHz (typical) Supply Current: 1.0 mA Supply Voltage: to 6.0V Rail-to-Rail Input/Output Extended Temperature Range: to +125°C Available in Single, Dual and Quad Packages Single with CS (MCP6293) Dual with CS (MCP6295) The Microchip Technology Inc. MCP6291/1R/2/3/4/5 family of operational amplifiers (op amps) provide wide bandwidth.
TPL0102-100 : 256 Taps Dual Channel Digital Potentiometer With I2C Interface And Non-Volatile Memory The TPL0102 is a two channel, linear-taper digital potentiometer with 256 wiper positions. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. The TPL0102-100 has an end-to-end resistance of 100k?. The TPL0102 has non-volatile.
MAX44269 : 1.3mm X 1.3mm, Low-Power Dual Comparator The MAX44269 is an ultra-small and low-power dual comparator ideal for battery-powered applications such as cell phones, notebooks, and portable medical devices that have extremely aggressive board space and power constraints. The comparator is available in a miniature 1.3mm x 1.3mm, 9-bump WLP package, making.