Details, datasheet, quote on part number: SN54ALS245AFK
CategoryLogic => Bus Transceivers
DescriptionOctal Bus Transceivers With 3-state Outputs
CompanyTexas Instruments, Inc.
DatasheetDownload SN54ALS245AFK datasheet
Find where to buy


Features, Applications

3-State Outputs Drive Bus Lines Directly pnp Inputs Reduce dc Loading Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs


These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. The -1 version of the SN74ALS245A is identical to the standard version, except that the recommended maximum IOL is increased to 48 mA. There no -1 version of the SN54ALS245A. The SN54ALS245A and SN54AS245 are characterized for operation over the full military temperature range to 125°C. The SN74ALS245A and SN74AS245 are characterized for operation from to 70°C.

FUNCTION TABLE INPUTS L H DIR H X OPERATION B data to A bus A data to B bus Isolation

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage, VCC. 7 V Input voltage, VI: All inputs. 7 V I/O ports. 5.5 V Operating free-air temperature range, TA: to 70°C Storage temperature range. to 150°C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

SN54ALS245A MIN VCC VIH VIL IOH IOL Supply voltage High-level input voltage Low-level input voltage High-level output current Low level output current Low-level NOM 5 MAX 5.5 SN74ALS245A MIN NOM 5 MAX 5.5 UNIT mA °C

TA Operating free-air temperature § Applies only to the -1 version and only if VCC is between 4.75 V and 5.25 V

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

All typical values are VCC = 25°C. Applies only to the -1 version and only if VCC is between 4.75 V and V § For I/O ports, the parameters IIH and IIL include the off-state output current. ¶ The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.


# For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.


Some Part number from the same manufacture Texas Instruments, Inc.
SN54ALS245AJ ti SN54ALS245A, Octal Bus Transceivers With 3-State Outputs
SN54ALS251FK 1-of-8 Data Selectors/multiplexers With 3-state Outputs
SN54ALS251J ti SN54ALS251, 1-Of-8 Data Selectors/multiplexers With 3-State Outputs
SN54ALS253FK Dual 1-of-4 Data Selectors/multiplexers With 3-state Outputs
SN54ALS253J ti SN54ALS253, Dual 1-Of-4 Data Selectors/multiplexers With 3-State Outputs
SN54ALS257A Quadruple 2-line to 1-line Data Selectors/multiplexers With 3-state Outputs
SN54ALS257AJ ti SN54ALS257A, Quad 2-Line to 1-Line Data Selectors/multiplexers With 3-State
SN54ALS257J ti SN54ALS257, Quad 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
SN54ALS258A Quadruple 2-line to 1-line Data Selectors/multiplexers With 3-state Outputs
SN54ALS258J ti SN54ALS258, Quad 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
SN54ALS259FK 8-bit Addressable Latches
SN54ALS259J ti SN54ALS259, 8-Bit Addressable Latches
SN54ALS273FK Octal D-type Flip-flops With Clear
SN54ALS273J ti SN54ALS273, Octal D-type Flip-flops With Clear

SN74AHC05DBR : ti SN74AHC05, Hex Inverters With Open-drain Outputs

SN74LVC3G07YZPR : Triple Gates ti SN74LVC3G07, Triple Buffer/driver With Open-drain Output

TPS2092D : Current Limited Switches ti TPS2092, 0.3A, 2.7 to 5.5V Dual (2 Input/ 2 Output) High-side MOSFET Switch IC, Fault Reporting, 2 Act-lo en

TPS71928-28DRVR : Dual, 200ma Output, Low Noise, High PSRR Low-dropout Linear Regulators

TMS28F002ZT70BDBJL : 4194304-bit Synchronous Flash Memory

SN74AUP1G57DRLRG4 : Low-power DUAL 2-input Positive-and GATE

TRS3243IDW : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Line Transceiver Tube 3 V ~ 5.5 V; IC DVR/RCVR RS232 ESD 28SOIC Specifications: Number of Drivers/Receivers: 3/5 ; Type: Line Transceiver ; Voltage - Supply: 3 V ~ 5.5 V ; Package / Case: 28-SOIC (0.295", 7.50mm Width) ; Packaging: Tube ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

TLV2362IPWG4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Tube 1.75mA ±1 V ~ 2.5 V; IC OPAMP GP 7MHZ DUAL LV 8TSSOP Specifications: Packaging: Tube ; Amplifier Type: General Purpose ; Number of Circuits: 2 ; Package / Case: 8-TSSOP (0.173", 4.40mm Width) ; Slew Rate: 3 V/µs ; Gain Bandwidth Product: 7MHz ; Current - Supply: 1.75mA ; Current - Output / Channel: 20mA ; Voltage - Supply, Single/Dual (±): ±1 V ~ 2.5

Same catergory

54F823 : Military/Aerospace->FAST. 54F823 - 9-Bit D Flip-Flop, Package: Lcc, Pin Nb=28.

74ABT2952 : Registered transceivers. 74ABT2952; Octal Registered Transceiver (3-State);; Package: SOT137 (SO24), SOT222-1 (DIP24), SOT340-1 (SSOP24), SOT355-1 (TSSOP24).

74HC/HCT195 : CMOS/BiCMOS->HC/HCT Family. 4-bit Parallel Access Shift Register. For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family s The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines Product File under Integrated Circuits, IC06 December 1990 Asynchronous master reset J, K, (D) inputs to the first stage Fully synchronous serial or parallel.

74HC2G125 : 74HC2G125; 74HCT2G125; Dual Buffer/line Driver; 3-state;; Package: SOT505-2 (TSSOP8).

CD74HC30 : CMOS/BiCMOS->HC/HCT Family. High Speed CMOS Logic 8-input NAND Gate.

CD74HC4316E : Analog Switches. ti CD74HC4316, High Speed CMOS Logic Quad Analog Switches With Level Translation.

DP84T22 : Controller/Driver->DRAM. Microcmos Programmable 256k/1m/4m Dynamic RAM Controller/drivers.

HD29468 : Line Drivers. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

MC14598BCL : 8-bit Bus-compatible Latches. The MC14597B and MC14598B are 8­bit latches, one addressed with an internal counter and the other addressed with an external binary address. The 8 latch­outputs are high drive, three­state and bus line compatible. The drive capability allows direct applications with MPU systems such as the Motorola 6800 family. With a 3­bit address counter (clocked.

MC74HC1GU04 : Unbuffered Inverter. The is a high speed CMOS unbuffered inverter fabricated with silicon gate CMOS technology. The MC74HC1GU04 output drive current is 1/2 compared to MC74HC series. High Speed: tPD 7 ns (Typ) at VCC 5 V Low Power Dissipation: ICC 1 mA (Max) = 25_C High Noise Immunity Balanced Propagation Delays (tpLH = tpHL) Symmetrical Output Impedance (IOH = IOL = 2 mA) Chip.

N74F350D : 4-bit Shifter. Shifts 4 bits of data to places under control of two 3-State outputs for bus organized systems The is a combination logic circuit that shifts a 4-bit word from to 3 places. No clocking is required as with shift registers. The 74F350 can be used to shift any number of bits any number of places up or down by suitable interconnection. Shifting can be: 1. Logical.

NLAST4501DFT2 : Analog Switches. Analog Switch, Package: SC-88A (SOT-353), Pins=5. The is an analog switch manufactured in sub­micron silicon­gate CMOS technology. It achieves very low RON while maintaining extremely low power dissipation. The device is a bilateral switch suitable for switching either analog or digital signals, which may vary from zero to full supply voltage. The is a low voltage, TTL (low threshold) compatible device,.

SN54ABT162501 : 18-bit Universal Bus Transceivers With 3-state Outputs. Members of the Texas Instruments Widebus TM Family B-Port Outputs Have Equivalent 25- Series Resistors, So No External Resistors Are Required State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation UBT TM (Universal Bus Transceiver) Combines D-Type Latches and D-Type Flip-Flops for Operation in Transparent, Latched, or Clocked.

SN74AHCT08DB : Quadruple 2-input Positive-and Gates. EPIC TM (Enhanced-Performance Implanted CMOS) Process Inputs Are TTL-Voltage Compatible Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin Very Small-Outline (DGV),.

SN74AS651DW : Registered Transceivers. ti SN74AS651, Octal Bus Transceivers/registers With 3-State Outputs.

SN74BCT760DW : Non-Inverting Buffers and Drivers. ti SN74BCT760, Octal Buffers/drivers With Open-collector Outputs.

SN74HC4075 : CMOS/BiCMOS->HC/HCT Family. Triple 3-input OR GATEs.

SN74HCT126 : CMOS/BiCMOS->HC/HCT Family. Quad Bus Buffer Gates With 3-state Outputs.

TC51N1802ECBTR : 1a Voltage Detector With Output Delay. The is a very low power, open drain output, CMOS voltage detector with built-in delay. It is particularly well-suited for battery powered applications because of its extremely low 1µA operating current and small surface-mount packaging. Each part is lasertrimmed to the desired threshold voltage, which can be specified from to 6.0V. The standard built-in.

935186260118 : HCT SERIES, TRIPLE 3-INPUT NAND GATE, PDSO14. s: Gate Type: NAND ; Supply Voltage: 5V ; Logic Family: CMOS ; Inputs: 3 ; Propagation Delay: 36 ns ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Pin Count: 14 ; IC Package Type: SSOP, Other, SSOP-14.

0-C     D-L     M-R     S-Z