Details, datasheet, quote on part number: M95040-0WMN6T
PartM95040-0WMN6T
Category
Description4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
CompanyST Microelectronics, Inc.
DatasheetDownload M95040-0WMN6T datasheet
Quote
Find where to buy
 
  

 

Features, Applications
4Kbit, 2Kbit and 1Kbit Serial SPI Bus EEPROM With High Speed Clock
FEATURES SUMMARY s Compatible with SPI Bus Serial Interface (Positive Clock SPI Modes)

5 MHz Clock Rate (maximum) Status Register BYTE and PAGE WRITE (up to 16 Bytes) Self-Timed Programming Cycle Adjustable Size Read-Only EEPROM Area Enhanced ESD Protection More than 1,000,000 Erase/Write Cycles More than 40 Year Data Retention

SUMMARY DESCRIPTION The a 4 Kbit x 8) electrically erasable programmable memory (EEPROM), accessed by a high speed SPI-compatible bus. The other members of the family (M95020, M95010) are identical, though proportionally smaller (2 and 1 Kbit, respectively). Each device is accessed by a simple serial interface that is SPI-compatible. The bus signals are C, D and Q, as shown in Table 1 and Figure 2. The device is selected when Chip Select (S) is taken Low. Communications with the device can be interrupted using Hold (HOLD). WRITE instructions are disabled by Write Protect (W). Figure 2. Logic Diagram

Note: 1. See page 28 (onwards) for package dimensions, and how to identify pin-1.

D Q Serial Clock Serial Data Input Serial Data Output Chip Select Write Protect Hold Supply Voltage Ground

SIGNAL DESCRIPTION VCC must be held within the specified range: VCC(min) to VCC(max). All of the input and output signals can be held High or Low (according to voltages of VIH, VOH, VIL or VOL, as specified in Tables to 16). These signals are described next. Serial Data Output (Q) This output signal is used to transfer data serially out of the device. Data bytes are shifted out on the falling edge of the Serial Clock (C). Serial Data Input (D) This input signal is used to transfer data serially into the device. Instructions, addresses, and input data bytes are shifted in on the rising edge of the Serial Clock (C). Serial Clock (C) This input signal provides the timing for the serial interface.

Chip Select (S) When this input signal is High, the device is deselected, and the Serial Data Output (Q) is high impedance. Hold (HOLD) This input signal is used to pause temporarily any serial communications with the device, without losing bits that have already been passed on the serial bus. Write Protect (W) This input signal is used to control whether the memory is write protected. When W is held Low, writes to the memory are disabled, but other operations remain enabled. No action on this signal, or on the Write Enable Latch (WEL) bit, can interrupt a Write cycle that has already started.


 

Related products with the same datasheet
M95010-MN3/W
M95010-MN3T/W
M95010-MN6
M95010-WBN6
M95010-WMN6
M95020-MN3
M95020-MN3/W
M95020-MN3T/W
M95020-MN6
M95020-WBN6
M95020-WMN6
M95040-0WMN6
Some Part number from the same manufacture ST Microelectronics, Inc.
M95040-BN3T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-MN3 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-MN3T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-MN3T/W 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-MN5T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-MN6 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-MN6T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-R 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-SBN3T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-W 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-WBN3T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-WBN6 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-WBN6T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-WMN3 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-WMN3T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-WMN3T/W 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-WMN5T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95040-WMN6 4KBIT, 2KBIT And 1KBIT Serial Spi Bus EePROM With High Speed Clock
M95040-WMN6T 4kbit, 2kbit And 1kbit Serial Spi Bus EePROM With High Speed Clock
M95080 16KBIT And 8KBIT Serial Spi Bus EePROM With High Speed Clock
M95080-BN1T 64/32/16/8 Kbit Serial Spi Bus EePROM With High Speed Clock

L7908ACV : + 2% Negative Voltage Regulators

LD2985AM38R : 1.8V- Very Low Drop And Low Noise Regulator

M54HCT258F1R : Hct257 Quad 2 Channel Multiplexer 3-state Hct258 Quad 2 Channel Multiplexer 3-state, Inverting

M87C257-12F3TR : Address Latched 256k 32k X 8 uv EPROM And OTP EPROM

PSD311-B-90LI : Low Cost Field Programmable Microcontroller Peripherals

ST72T512R4T7S : 8-bit MCU With Nested Interrupts, EePROM, ADC, 16-bit Timers, 8-bit PWM Art, Spi, Sci, CAN Interfaces

ST93C46CB6TR : 1k 64 X 16 or 128 X 8 Serial Microwire EePROM

PSD853F5A-12MI : Flash In-system Programmable ISP Peripherals For 8-bit MCUs

PD55015TR-E : RF Power Transistor, Ldmost Plastic Family N-channel Enhancement-mode Lateral Mosfets

M24C64-RMB5G/P : 8K X 8 I2C/2-WIRE SERIAL EEPROM, PBGA8 Specifications: Density: 66 kbits ; Number of Words: 8 k ; Bits per Word: 8 bits ; Bus Type: Serial ; Production Status: Full Production ; Data Rate: 0 MHz ; Supply Voltage: 2.5V ; Package Type: 0.50 MM PITCH, ROHS COMPLIANT, WLCSP-8 ; Pins: 8 ; Operating Range: AUTOMOTIVE ; Operating Temperature: -

M46Z256Y-85PM1 : 256K X 16 NON-VOLATILE SRAM MODULE, 120 ns, DMA40 Specifications: Memory Category: NVRAM, NVSRAM, SRAM Chip ; Density: 4194 kbits ; Number of Words: 256 k ; Bits per Word: 16 bits ; Pins: 40 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 120 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

SPC564B70L7B8ECX : MICROCONTROLLER Specifications: Life Cycle Stage: ACTIVE

 
0-C     D-L     M-R     S-Z