Details, datasheet, quote on part number: M48T35YPC
PartM48T35YPC
CategoryMemory => SRAM
Description256 Kbit 32kb x8 Timekeeper SRAM
CompanyST Microelectronics, Inc.
DatasheetDownload M48T35YPC datasheet
  

 

Features, Applications

INTEGRATED ULTRA LOW POWER SRAM, REAL TIME CLOCK, POWER-FAIL CONTROL CIRCUIT and BATTERY BYTEWIDETM RAM-LIKE CLOCK ACCESS BCD CODED YEAR, MONTH, DAY, DATE, HOURS, MINUTES and SECONDS FREQUENCY TEST OUTPUT for REAL TIME CLOCK AUTOMATIC POWER-FAIL CHIP DESELECT and WRITE PROTECTION WRITE PROTECT VOLTAGES (VPFD = Power-fail Deselect Voltage): M48T35: 4.5V VPFD M48T35Y: 4.2V VPFD 4.5V

SELF-CONTAINED BATTERY and CRYSTAL in the CAPHAT DIP PACKAGE SOIC PACKAGE PROVIDES DIRECT CONNECTION for a SNAPHAT HOUSING CONTAINING the BATTERY and CRYSTAL SNAPHATŪ HOUSING (BATTERY and CRYSTAL) is REPLACEABLE PIN and FUNCTION COMPATIBLE with JEDEC STANDARD 32Kb x8 SRAMs

G W VCC VSS Address Inputs Data Inputs / Outputs Chip Enable Output Enable Write Enable Supply Voltage Ground

Symbol TA TSTG TSLD (2) VIO VCC IO PD Parameter Grade 1 Ambient Operating Temperature Grade 6 Storage Temperature (VCC Off, Oscillator Off) Lead Solder Temperature for 10 seconds Input or Output Voltages Supply Voltage Output Current Power Dissipation mA W Value to 70 Unit °C

Note: 1. Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to the absolute maximum rating conditions for extended periods of time may affect reliability. 2. Soldering temperature not to exceed 260°C for 10 seconds (total thermal budget not to exceed 150°C for longer than 30 seconds).

CAUTION: Negative undershoots below ­0.3V are not allowed on any pin while in the Battery Back-up mode. CAUTION: Do NOT wave solder SOIC to avoid damaging SNAPHAT sockets.

DESCRIPTION The M48T35/35Y TIMEKEEPERŪ RAM 32Kb x8 non-volatile static RAM and real time clock. The monolithic chip is available in two special packages to provide a highly integrated battery backed-up memory and real time clock solution. The is a non-volatile pin and function equivalent to any JEDEC standard 32Kb x8 SRAM. It also easily fits into many ROM, EPROM,

and EEPROM sockets, providing the non-volatility of PROMs without any requirement for special write timing or limitations on the number of writes that can be performed. The 28 pin 600mil DIP CAPHAT houses the M48T35/35Y silicon with a quartz crystal and a long life lithium button cell in a single package. The 28 pin 330mil SOIC provides sockets with gold plated contacts at both ends for direct con-

Mode Deselect Write Read Deselect VSO to VPFD (min) (2) VSO to 5.5V VCC E VIH VIL VIH VIL VIH X DQ0-DQ7 High Z DIN DOUT High Z High Z High Z Power Standby Active CMOS Standby Battery Back-up Mode

Note: X = VIH or VIL; VSO = Battery Back-up Switchover Voltage. 2. See Table 7 for details.
x 8 SRAM ARRAY LITHIUM CELL VOLTAGE SENSE AND SWITCHING CIRCUITRY VPFD

nection to a separate SNAPHAT housing containing the battery and crystal. The unique design allows the SNAPHAT battery package to be mounted on top of the SOIC package after the completion of the surface mount process. Insertion of the SNAPHAT housing after reflow prevents potential battery and crystal damage due to the high temperatures required for device surfacemounting. The SNAPHAT housing is keyed to prevent reverse insertion. The SOIC and battery/crystal packages are shipped separately in plastic antistatic tubes or in Tape & Reel form.

For the 28 lead SOIC, the battery/crystal package (i.e. SNAPHAT) part number "M4T28BR12SH1". As Figure 3 shows, the static memory array and the quartz controlled clock oscillator of the M48T35/35Y are integrated on one silicon chip. The two circuits are interconnected at the upper eight memory locations to provide user accessible BYTEWIDE clock information in the bytes with addresses 7FF8h-7FFFh.


 

Related products with the same datasheet
M48T35-70MH1TR
M48T35-70MH6
M48T35-70MH6TR
M48T35-70PC1
M48T35-70PC1TR
M48T35-70PC6
M48T35-70PC6TR
M48T35AV-10MH1
M48T35AV-10MH1TR
M48T35AV-10MH6
M48T35AV-10MH6TR
M48T35AV-10PC1
Some Part number from the same manufacture ST Microelectronics, Inc.
M48T35YSH 256 Kbit 32kb x8 Timekeeper SRAM
M48T37V 3.3V-5V 256 Kbit (32KB X8) Timekeeper SRAM
M48T37V-10MH1 3.3v-5v 256 Kbit 32kb x8 Timekeeper SRAM
M48T37V-10MH1E 3.3V-5V 256 Kbit (32KB X8) Timekeeper SRAM
M48T37V-10MH1TR 3.3v-5v 256 Kbit 32kb x8 Timekeeper SRAM
M48T37V-10MH6E 3.3V-5V 256 Kbit (32KB X8) Timekeeper SRAM
M48T37V-10MH6TR 3.3v-5v 256 Kbit 32kb x8 Timekeeper SRAM
M48T37V-70 3.3V-5V 256 Kbit (32KB X8) Timekeeper SRAM
M48T37V-70MH1 3.3v-5v 256 Kbit 32kb x8 Timekeeper SRAM
M48T37Y 3.3V-5V 256 Kbit (32KB X8) Timekeeper SRAM
M48T37Y-10MH1 3.3v-5v 256 Kbit 32kb x8 Timekeeper SRAM
M48T37Y-70 3.3V-5V 256 Kbit (32KB X8) Timekeeper SRAM
M48T37Y-70MH1
M48T37Y-70MH6 3.3v-5v 256 Kbit 32kb x8 Timekeeper SRAM
M48T37Y-70MH6E 3.3V-5V 256 Kbit (32KB X8) Timekeeper SRAM
M48T37Y-70MH6TR 3.3v-5v 256 Kbit 32kb x8 Timekeeper SRAM
M48T39Y 256kb (32k X 8) Timekeeper(r) SRAM
M48T39Y-100PM1 256 KB 32k x8 Timekeeper SRAM
M48T512V 3.3V-5V 4 MB (512K X 8) Timekeeper SRAM
M48T512V-70PM1 3.3v-5v 4 Mbit 512kb x8 Timekeeper SRAM
M48T512Y 3.3V-5V 4 MB (512K X 8) Timekeeper SRAM

M48Z35Y-70MH6F : 256 Kbit (32Kb X 8) Zeropower SRAM

STB70NF02L : Low Voltage N-channel 20V - 0.006 Ohm - 70A D2PAK Low Gate Charge StripFET ii Power MOSFET

PSD913F4-70JT : Flash In-system Programmable ISP Peripherals For 8-bit MCUs

ST92124CR9Q6 : 8/16-bit Single Voltage Flash MCU Family WITH RAM, E3 Tm(emulated Eeprom), CAN 2.0B AND J1850 BLPD

M24256-BWDW6G : 32K X 8 I2C/2-WIRE SERIAL EEPROM, PDIP8 Specifications: Density: 262 kbits ; Number of Words: 32 k ; Bits per Word: 8 bits ; Bus Type: Serial ; Production Status: Full Production ; Data Rate: 0 MHz ; Supply Voltage: 5V ; Package Type: LEAD FREE, PLASTIC, DIP-8, DIP ; Pins: 8 ; Operating Range: Industrial ; Operating Temperature: -40 to 85

STM8SP903F3U6 : 8-BIT, FLASH, 16 MHz, MICROCONTROLLER, PDSO20 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 16 MHz ; ROM Type: Flash ; Supply Voltage: 2.95 to 5.5 volts ; I/O Ports: 16 ; Package Type: SOP, Other, 0.300 INCH, 0.65 MM PITCH, ROHS COMPLIANT, PLASTIC, SOP-20 ; Operating Range: Auto ; Pin Count: 20 ; Operating Temperature: -40 to 125 C (-

STEVAL-IKR002V5 : RF Development Tools SPIRIT1 New Development Kit / Low Data Rate - Short Range Transceiver 915MHz band STMicroelectronics Transceiver Development Kits & Daughterboard are based on the SPIRIT1, a sub-GHz, low power, low data rate transceiver suitable for the ISM bands and wireless M-BUS. The three development kits are offered in three different bands (169MHz, 433MHz and 915MHz). Each motherboar

STP42N60M2-EP : MOSFET N-CH 600V 34A EP TO220AB Specifications: Family: FETs - Single ; Series: MDmesh? M2 ; Packaging  : Tube   ; FET Type: MOSFET N-Channel, Metal Oxide ; FET Feature: Standard ; Drain to Source Voltage (Vdss): 600V ; Current - Continuous Drain (Id) @ 25°C: 34A (Tc) ; Rds On (Max) @ Id, Vgs: 87 mOhm @ 17A, 10

 
0-C     D-L     M-R     S-Z