Details, datasheet, quote on part number: LC6528F
PartLC6528F
CategoryMicrocontrollers
Description4-bit Single-chip Microprocessor For Small-scale Control-oriented Application
CompanySanyo Semiconductor Corporation
DatasheetDownload LC6528F datasheet
  

 

Features, Applications

Single Chip 4-Bit Microcontroller for Small-Scale Control-Oriented Applications

The L, LC6528N belong to our single-chip 4-bit microcontroller LC6500 series fabicated using CMOS process technology and are suited for use in small-scale control-oriented applications. Their basic asrchitecture and instruction set are the same. Application areas include the standard logic circuits and applications where the number of controls is small. The L, LC6528N have relation to the / H. The C version can be replaced by N version, and the H version (a part of the function is different). The L version is added as a low voltage version. The following show the careful difference of C and N version when you replace C version with N version. C version N version Operating Temperature 1-pin C oscillation exist not exist 400kHz MURATA R=2.2k 800kHz MURATA R=0 R=2.2k KYOCERA R=0 1MHz MURATA R=0 R=2.2k (Note) The suffix of recommend oscillation is changed C version and N version, but the characteristic is no change.

Features

1) CMOS technology for a low-power operation (with instruction-controlled standby function) 2) ROM / RAM LC6527N ROM ! 8bits, RAM 4bits LC6528N ROM ! 8bits, RAM 4bits 3) Instruction set : 51 kinds selectable from 80 instructions common to the LC6500 series 4) Wide operating voltage range from 6.0V (L version) 5) Instruction cycle time 0.92µs (F version)

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

6) Flexible / O port Number of ports : 4 ports / 13 pins max. All ports : Input / output common Input / output voltage 15V max. (open drain type) Output current 20mA max. (sink current) (LED direct drivable) Option selectable for your intended system A. Open drain output, pull-up resistor : Single-bit select for all ports B. Output level at the reset mode : 4-bit select / L level for port D 7) Stack level : 4 levels 8) Timer 4-bit prescaler+8-bit programmable timer 9) Clock oscillation option selectable for your intended system Oscillator option :2-pin RC oscillation (N, L version) 2-pin ceramic resonator oscillation, 1-pin external clock input (N, F, L version) Predivider option : No predivider, / 3 predivider, / 4 predivider (N, L version)

Instruction Oscillation Characteristic Input / output port On-chip function

4-bit prescaler+8-bit timer 4-bit prescaler+8-bit timer 4-bit prescaler+8-bit timer 4 Standby available Standby available Standby available by HALT instruction by HALT instruction by HALT instruction Number of ports O 13 max. O 13 max. O 13 max. / O voltage 15V max. 15V max. 15V max. Output current 10mA typ. 20mA max. 10mA typ. 20mA max. 10mA typ. 20mA max. / O circuit configuration Open drain (N-channel) or pull-up resistor-provided output selectable bit by bit. Output level at reset mode "H" or "L" level selectable port by port (port C, D only) Minimum cycle time 6.0µs (VDD3V) Supply voltage to 6V Current dissipation 2.5mA typ. 4mA typ. 2.5mA typ. Resonator (850kHz, 400kHz typ.) RC (400kHz typ.) ceramic (400k, 800k,1MHz, ceramic 4MHz ceramic 800k,1MHz, 4MHz) predivider option Other Package DIP18, MFP18* (Note) Information on the resonator and oscillation circuit constants will be presented as soon as the recommended circuit is determined. *MFP18 : under development

Common to DIP MFP unit 3095 Do not immerse the package in the solder dip tank when mounting the MFP on the substrate.

(Note) The package is the reference figure without the description of the rank. Please inquire us for the formal package.


 

Some Part number from the same manufacture Sanyo Semiconductor Corporation
LC6528H
LC6528H 4-bit, Single-chip CMOS Microcontrollers, Package :
LC6528L Substrate , Which is a Modified Pin Count Version of The LC65PG23/26 or Substrate , Which is a Modified Pin Count Version of The LC65E29, Package : Dip
LC6528L 4-bit Single-chip Microprocessor For Small-scale Control-oriented Application
LC6528N Substrate , Which is a Modified Pin Count Version of The LC65PG23/26 or Substrate , Which is a Modified Pin Count Version of The LC65E29, Package : Dip
LC6528N 4-bit Single-chip Microprocessor For Small-scale Control-oriented Application
LC6529F 4-bit Microcomputer For Small-scale Control Application
LC6529F 4-channel Comparator Input on Chip, Package : Dip
LC6529H
LC6529L 4-bit Microcomputer For Small-scale Control Application
LC6529L 4-channel Comparator Input on Chip, Package : Dip
LC6529N 4-bit Microcomputer For Small-scale Control Application
LC6529N 4-channel Comparator Input on Chip, Package : Dip
LC6530C
LC6532C
LC653604A Directly Drivable VFD (32 Outputs), 8-channel X 8-bit ad Converter Input, 4/8-bit Serial I/O, Watchdog Timer Reset Option, Package : Dip
LC653606A
LC653608A
LC653702A Directly Drivable VFD (27 Outputs), 4/8-bit Serial I/O, Watchdog Timer Reset Option, Package : Dip
LC653704A
LC653706A

2SC3864 :

5HP01SS : PicomosFET Series, Package : SSFP

LA6529M : 3-channel BTL Driver For CD-ROM, Package : Sop

LC72722 :

LC7822M : Analog Function Switch

LC99059 :

SB05-05P :

STK4191MK2V :

Same catergory

CXP740056/740096/740010 : SPC700 Series. The is a CMOS 8-bit microcomputer integrating on a single chip an A/D converter, serial interface, timer/counter, time-base timer, capture timer/counter, remote control receive circuit, PWM output, and the like besides the basic configurations of 8-bit CPU, ROM, RAM, and I/O port. The CXP740056/740096/740010 also provides the sleep/stop functions that.

GMS81508B : 800 Series->General Purpose. 8-BIT Single-chip Microcontrollers. Revision History Ver 2.0 (this manual) May, 01, 2001 The manuals of GMS81508B/16B/24B and GMS82512/16/24 are integrated. Choice-Gang4 writer(for PC) is replaced with Choice-Gang4(for stand alone). Ver 1.05 (before manual) Sep., 20, 2000 Choice-Dr writer is omitted on the page 76 because it is not available any longer. For the Hynix MCU on the ALL-07,.

LC66404A : 4-bit Microcomputer (4 Kbyte ROM-contained).

MN101C08C : ROM(×8-bit) = 48K ;; RAM(×8-bit) = 1.5K ;; I/O(Pins) = 68 ;; Package = QFP084-P-1818E(Pb Free).

MSP430F147 : Ultra-low Power Microcontroller. Functions as Asynchronous UART or Synchronous SPI Interface - Two USARTs USART1) MSP430x14x(1) Devices - One USART (USART0) MSP430x13x Devices Family Members Include: MSP430F133: 8KB+256B Flash Memory, 256B RAM MSP430F135: 16KB+256B Flash Memory, 512B RAM MSP430F1471: 32KB+256B Flash Memory, 1KB RAM MSP430F1481: 48KB+256B Flash Memory, 2KB RAM MSP430F1491:.

P83C366BDA : Microcontrollers For Pal/secam TV With Osd And VST. Product File under Integrated Circuits, IC20 1999 Mar 10 CONTENTS GENERAL ORDERING INFORMATION BLOCK DIAGRAM PINNING INFORMATION MEMORY ORGANIZATION I/O FACILITY TIMERS AND EVENT COUNTERS REDUCED POWER MODE I2C-BUS SERIAL I/O INTERRUPT SYSTEM OSCILLATOR CIRCUITRY RESET CIRCUITRY PIN FUNCTION SELECTION ANALOG CONTROL ANALOG-TO-DIGITAL CONVERTERS (ADC).

PIC16C505 : PICmicro without analog capability. This Powerful (200 Nanosecond Instruction Execution) Yet Easy-to-program (only 33 Single Word Instructions) CMOS ROM-based 8-bit Microcontroller Packs Microchip’s Powerful Pic Architecture Into a 14-pin Package.

SN8P0213P : 8-bit Microcontroller. an 8-bit micro-controller utilized with CMOS technology fabrication and featured with low power consumption and high performance by its unique electronic structure. This chip is designed with the excellent IC structure, including the program memory to 2K/1K-word OTP ROM, 64 bytes of the data memory, one 8-bit T0 basic timer, one 8-bit timer/event counter,.

TMP47P407 : CISC->TMP. CMOS 4-bit Microcontroller.

UPD17719 : 4-bit Single-chip Microcontrollers With Dedicated Hardware For Digital Tuning System.

Z8F0113HH005EC : 8-bit flash MCU family, extensive peripherals, with enhanced 20MHz Z8 CPU ZiLOG's Z8 Encore!® family of Flash microcontrollers offer up to 64KB of Flash, software code can be reprogrammed during development and into production. Performance is further enhanced by ZiLOG’s register-to-register architecture, featuring a 20MHz CPU core, up to 4KB of RAM,.

HT46RB70 : This device is an 8-bit high performance RISC architecture microcontroller designed for USB product applications. It is particularly suitable for use in products such as USB and/or SPI touch-panels, USB and/or SPI touch-pads, PS II joysticks, XBOX joysticks, USB Mice keyboards and joystick. A HALT feature is included to reduce power consumption..

PIC32MX320F032H : PIC32MX Family Data Sheet * 40MHz, 1.53 DMIPS/MHz, 32-bit MIPS M4K Core * 5 Stage pipeline, Harvard architecture * MIPS16e mode for up to 40% smaller code size * Single cycle multiply and hardware divide unit * 32 x 32-bit Core Registers * 32 x 32-bit Shadow Registers * Fast context switch and interrupt response.

HT82A520R : Full Speed USB 8bit OTP MCU With SPI The HT82A520R/HT82A620R are 8-bit high performance RISC-like microcontrollers designed for USB keyboard mouse and joystick product applications. The advantages of low power consumption, I/O flexibility, programmable frequency divider, timer functions, oscillator options, multi-channel A/D Converter, Pulse Width Modulation.

 
0-C     D-L     M-R     S-Z