|Category||Microprocessors => System Components|
|Company||Sanyo Semiconductor Corporation|
|Datasheet||Download LC651431F datasheet
Four-Bit CMOS Microcontrollers for Small-Scale Control Applications
The LC651431N/F/L and LC651432N/F/L are the smallscale control models in Sanyo's LC6500 Series of 4-bit microcontrollers and feature the same basic architecture and instruction set. These microcontrollers are appropriate for a wide range of applications, from applications that require only a limited number of circuits and controls and were previously implemented in standard logic to larger application such as audio equipment, including tape decks and disc players, office equipment, communication equipment, automotive equipment, and home appliances. Furthermore, since these products have equivalent basic functions (although there are differences in some functions and characteristics) and are pin compatible with the earlier LC6543N/F/L and LC6546N/F/L products, they can be used to replace those devices.Features
Fabricated in a CMOS process for low power operation (Standby mode can be controlled by CPU instructions.) ROM/RAM LC651432N/F/L --ROM: bits, RAM: × 4 bits LC651431N/F/L --ROM: bits, RAM: × 4 bits Instruction set: The 80-instruction set common to the whole LC6500 Series Wide operating supply voltage range V (L versions) Instruction cycle time µs (F versions) On-chip serial I/O function
Highly flexible I/O ports Number of ports 7 ports (Up to 25 pins) All ports Can be used for either input or output Voltage handling capability (input and output): 15 V maximum (For open-drain specification ports) Output current: 20 mA maximum sink current (Capable of directly driving an LED.) I/O port options to match application requirements: Open-drain output and pull-up resistor specification: Can be specified for all ports in bit units. Output level at reset specification: Either a high or low level can be specified for ports C and in 4-bit units each. Interrupts Timer overflow vector interrupt (can also be tested by CPU instructions) INT pin or serial I/O full/empty vector interrupt (can also be tested by CPU instructions) Stack levels: 4 levels (also used by interrupts) Timers: 8-bit programmable timer with 4-bit prescaler Clock oscillator options to match application requirements: Oscillator circuit option: Two-pin RC oscillator (N and L versions) Two-pin ceramic oscillator or single external clock input pin (N, F, and L versions) Divider circuit option: No divider, built-in divideby-three circuit, built-in divide-by-four circuit (N and L versions) Continuous square-wave output with a period 64 times the cycle time.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Parameter ROM Memory RAM Instruction set Table reference Interrupts Timers On-chip functions Stack levels Standby function Number of ports Serial ports I/O voltage I/O ports Output current I/O circuit types Output level at reset Square-wave output Minimum cycle time Characteristics Supply voltage Supply current Oscillator element Divider circuit option Other features Package 2.77 µs (VDD 1 mA typ. RC oscillator or 800 kHz typical) Ceramic oscillator (400 kHz, 800 kHz, 1 MHz, or 4 MHz) × 8 bits × 8 bits × 4 bits × 4 bits (1431N/F/L) 80 Provided One external, one internal 8-bit timer with 4-bit prescaler 4 HALT instruction based standby function Provided to 25 I/O pins I/O or 8-bit units 15 V max. 10 mA typ. 20 mA max. Open drain (n channel) or built-in pull-up resistor output can be specified in 1-bit units. High or low can be specified in port units (C and D ports only) Possible 0.92 µs (VDD 1.5 mA typ. Ceramic oscillator: 4 MHz 3.84 µs (VDD 1 mA typ. RC oscillator (400 kHz typical) Ceramic oscillator (400 kHz or 4 MHz) 1/4 LC651432L/1431L
Note: Sanyo will be providing details on oscillator elements and oscillator circuit constants as recommended circuits are developed. Contact your Sanyo representative for more information.
|Some Part number from the same manufacture Sanyo Semiconductor Corporation|
|LC651431L Although Certain of The Functions And Characteristics Differ, These Devices Are Pin Compatible With The Earlier LC6543L, LC6546L, LC6543N, LC6546N, LC6543F, And LC6546F. The LC65P43 is Used as The One-time|
|LC651431N Although Certain of The Functions And Characteristics Differ, These Devices Are Pin Compatible With The Earlier LC6543L, LC6546L, LC6543N, LC6546N, LC6543F, And LC6546F. The LC65P43 is Used as The One-time|
|LC651432F Although Certain of The Functions And Characteristics Differ, These Devices Are Pin Compatible With The Earlier LC6543L, LC6546L, LC6543N, LC6546N, LC6543F, And LC6546F. The LC65P43 is Used as The One-time|
|LC651432L Although Certain of The Functions And Characteristics Differ, These Devices Are Pin Compatible With The Earlier LC6543L, LC6546L, LC6543N, LC6546N, LC6543F, And LC6546F. The LC65P43 is Used as The One-time|
|LC651432N Although Certain of The Functions And Characteristics Differ, These Devices Are Pin Compatible With The Earlier LC6543L, LC6546L, LC6543N, LC6546N, LC6543F, And LC6546F. The LC65P43 is Used as The One-time|
|LC6514B 4-bit Single-chip Microprocessor|
|LC65204A 4-bit Singlechip Microcomputer For Control Applications|
|LC6520C 4 / 8 Bit Sirial i /O, Package : QFP|
|LC6520C 4-bit Microcomputer For Control-oriented Application|
|LC6520H 4 / 8 Bit Sirial i /O, Package : Dip|
|LC6520H 4-bit Microcomputer For Control-oriented Application|
|LC6522C 4 / 8 Bit Sirial i /O, Package : Dip|
|LC6522C 4-bit Microcomputer For Control-oriented Application|
2SB883 : PNP Epitaxial Planar Silicon Darlington Transistor, Driver Application
DL-3038-011 : 40 °C at 5 MW, Package :
FSS139 : Load Switch, Package : SOP8
LC65E43 : Windowed EPROM Version, Package : DIC
LC7883KMB-TLM : 16 Bits Digital Filter And Digital-to-analog Converter For Digital Audio
LC895170W : Cd-rom Error Correction Lsi
SPS-442_SERIES : Receiver Pre-amp Module For Infrared Remote Control , Package :
SCH1311 : General-purpose Switching Device Applications
386DX : X86 Family. 32-bit Chmos Microprocessor With Integrated Memory Management.
7854 : Application Specific. Full-duplex OC12, Integrated Public Key,hipp Architecture.
HD6437144 : RISC->SuperH RISC engine family. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.
HS-80C86RH : 68XX Family. Radiation Hardened 16-Bit CMOS Microprocessor. The Intersil HS-80C86RH high performance radiation hardened 16-bit CMOS CPU is manufactured using a hardened field, self aligned silicon gate CMOS process. Two modes of operation, MINimum for small systems and MAXimum for larger applications such as multiprocessing, allow user configuration to achieve the highest performance level. Industry standard.
IA59032 : 32 X 32 Dual Port RAM; 0.7-7V; 200mA; 23MHz; 32-bit High Speed Microprocessor Slice.
IDTRC5000 : MIPS Family. Multi-issue 64-bit Microprocessor. Dual issue super-scalar execution core, executing at high-frequency - 250 MHz frequency - Dual issue floating-point ALU operations with other instruction classes - Traditional 5-stage pipeline, minimizes load and branch latencies - Single cycle repeat rate for most floating point ALU operations High level of performance for a variety of applications.
M37560EFDFP : 740 family->740 series. Regarding the change of names mentioned in the document, such as Mitsubishi Electric and Mitsubishi XX, to Renesas Technology Corp. The semiconductor operations of Hitachi and Mitsubishi Electric were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory.
MC68332ACFC16 : 68K/ColdFire->68K M683XX. M68332 32-Bit Modular Microcontroller. The MC68332, a highly-integrated 32-bit microcontroller, combines high-performance data manipulation capabilities with powerful peripheral subsystems. The MCU is built up from standard modules that interface through a common intermodule bus (IMB). Standardization facilitates rapid development of devices tailored for specific applications. The MCU incorporates.
PC745B : Military & Aerospace->High Rel Microprocessors. 32-bit Power PC Risc Microprocessor, 300-366 MHZ.
PC8245 : Military & Aerospace->High Rel Microprocessors. 32-bit Integrated Risc Processor W/pci & Memory Controller, 300 MHZ.
QL903M : Fpga - Enabled Embedded Processors. QuickMIPS Embedded Standard Product (ESP) Family 32-bit MIPS 4Kc processor runs to 233 MHz (303 Dhrystone MIPS) 1.3 Dhrystone MIPS per MHz MDU supports MAC instructions for DSP functions KB of instruction cache (4-way set associative) KB of data cache (4-way set associative), lockable on a per line basis One with modem control signals Both with IRDA-compliant.
STFLWARP20 : 8-bit Fuzzy Co-processor. Digital Fuzzy Co-processor 8-bit I/O High Speed Rules Processing 4 Input, 2 Output, 32 Rules to 256 Rules (4 Antecedents,1 Consequent) to 8 Input Configurable Variables to 16 Membership Functions for an Input Variable Antecedent Membership Functions with Triangular and Trapezoidal Shape to 4 Output Variables to 256 Membership Functions for all Consequents.
W65C816S : The W65C816S is a Low Power Cost Sensitive 16-bit Microprocessor.. © The Western Design Center, Inc., 2003. All rights reserved WDC reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Information contained herein is provided gratuitously and without liability, to any user. Reasonable efforts have been made to verify accuracy of the information.
MPC8323EPQIIFS : The cost-effective MPC8323E communications processor family that includes the MPC8323E, MPC8323, MPC8321E and MPC8321 meets the requirements of several small office/home office (SOHO), access, IP services and industrial control applications. It provides better CPU performance, additional functionality and faster interfaces than current PowerQUICC™ II processors.
PIC24HJ32GP202 : PIC24H 16-bit MCU in low-pin count packages featuring the new Peripheral Pin Select capability..
DS5230 : IP Security Microcontroller The DS5230 is a highly secure, four clocks-per-machine cycle, 100% 8051-instruction-set-compatible microprocessor in the secure microcontroller family from Maxim Integrated Products. It is a feature-reduced and cost-reduced version of the popular DS5250 high-speed secure microcontroller. Its proven architecture protects embedded.