Details, datasheet, quote on part number: LC651154L
PartLC651154L
CategoryMicrocontrollers
Description
CompanySanyo Semiconductor Corporation
DatasheetDownload LC651154L datasheet
  

 

Features, Applications

Four-Bit CMOS Microcontrollers for Small-Scale Control Applications

The LC651154N/F/L and the LC651152N/F/L are the small-scale control application versions of Sanyo's LC6500 series of 4-bit single-chip CMOS microcontrollers, and feature the same basic architecture and instruction set. These microcontrollers include 8input 8-bit A/D converter and are appropriate for use in a wide range of applications, from applications with a small number of circuits and controls that were previously implemented in standard logic to applications with a larger scale such as home appliances, automotive equipment, communications equipment, office equipment, and audio equipment such as decks and players. Also note that since these ICs provide the same basic functions (certain functions and specifications do differ) as, and are pin compatible with the earlier LC651104N/F/L and LC651102N/F/L, they can replace those ICs in most cases. All ports: Are I/O ports I/O voltage handling capacity: 15 V (maximum) (Open-drain specification D, E, and F ports only) Output current: 20 mA (maximum) sink current (Are capable of directly driving an LED.) Support options to match application system specifications A. Open-drain output, internal pull-up resistor specification: All ports, in bit units B. Output level at reset specification: Ports C and D can be specified go to the high or low level in 4-bit units. Interrupt function Timer interrupts through an interrupt vector (Can be tested under program control) INT pin and serial I/O full/empty interrupts through an interrupt vector (Can be tested under program control) Stack levels: 8 (Shared with the interrupt system.) Timers: 4-bit variable prescaler and 8-bit programmable timers Clock oscillator options that match a wide range of system specifications Oscillator circuit options: Two-pin RC oscillator (N and L versions) Two-pin ceramic oscillator (N, F, and L versions) Clock divider circuit options: No divider, built-in divide-by-3, built-in divide-by-4 (N and L versions) Continuous square wave output (with a period 64 times the cycle time) A/D converter (successive approximation) 8-bit precision with 8 input channels Watchdog timer

Features

Fabricated in a CMOS process for low power (A standby function that can be invoked under program control is also provided.) ROM/RAM LC651154N/F/L ROM: 8 bits, RAM: 4 bits LC651152N/F/L ROM: 8 bits, RAM: 4 bits Instruction set: The 80-instruction set common to the LC6500 family Wide operating supply voltage range: V (L versions) Instruction cycle time: s (F versions) On-chip serial I/O function Flexible I/O ports Number of ports: 6 ports with a total of 22 pins

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

651152L RC circuit time constant Optional watchdog timer reset function from an external pin Function Table

Parameter Memory ROM RAM Instructions Instruction set Table reference Interrupts Timers On-chip functions Stack levels Standby function Number of ports Serial port I/O voltage handling capability I/O ports Output current I/O circuit types Output level at reset Square wave output Minimum cycle time Characteristics Supply voltage Current drain Oscillator Other items Oscillator element Divider circuit option Package 8 bits 8 bits 4 bits (1154/1152N) 80 Supported 1 external, 1 internal 4-bit variable prescaler + 8-bit timers 8 Standby mode entered by the HALT instruction supported 22 I/O port pins Input and output or 8 bit units 15 V max. 10 mA typ. 20 mA max. 8 bits 8 bits 4 bits (1154/1152F) 80 Supported 1 external, 1 internal 4-bit variable prescaler + 8-bit timers 8 Standby mode entered by the HALT instruction supported 22 I/O port pins Input and output or 8 bit units 15 V max. 10 mA typ. 20 mA max. 8 bits 8 bits 4 bits (1154/1152L) 80 Supported 1 external, 1 internal 4-bit variable prescaler + 8-bit timers 8 Standby mode entered by the HALT instruction supported 22 I/O port pins Input and output or 8 bit units 15 V max. 10 mA typ. 20 mA max.

Open drain (n-channel) and pull-up resistor output options can be specified in 1-bit units A high or low level output can be selected in port units (ports C and D only) Supported 2.77 s (VDD 1.5 mA typ. RC (800/400 kHz typ.) Ceramic k, 1 MHz, 4 MHz) MFP30S, SSOP30 Supported 0.92 s (VDD 2 mA typ. Ceramic 4 MHz MFP30S, SSOP30 Supported 3.84 s (VDD 1.5 mA typ. RC (400 kHz typ.) Ceramic k, 1 MHz, 4 MHz) MFP30S, SSOP30

Note: Recommendations for oscillator elements and oscillator circuit constants will be announced as the recommended circuits for these ICs are determined. Verify the progress of these developments periodically.

651152F, 651152L Differences between the LC651154N/1152N and the LC651104N/1102N. The table below lists the points that require care when converting an existing product that uses the LC651104N/1102N to use the LC651154N/1152N.

Parameter Pdmax (1) : DIP Allowable power dissipation Pdmax (2) : MFP Pdmax (3) : SSOP fCFOSC [OSC1, OSC2] Oscillator characteristics Ceramic oscillator Oscillator frequency 2-pin RC oscillator Oscillator frequency fMOSC 160 mW Oscillator frequency precision: within 2% Changes in the recommended oscillator constants (See table 1.) 800 kHz typ. (VDD 6 V) Constants changed: Rext 1 % Frequency variability (sample to sample): to 1298 kHz 400 kHz typ. (VDD 6 V) Frequency variability (sample to sample): to 616 kHz Pull-up resistors Serial clock input clock cycle time A/D converter characteristics AV+ = VDD AV = VSS Watchdog timer 100 1% Package Ru [RES] tCKCY (1) [ SCK] Operating voltage Reference input current IRIF [AV+, AV] (500 k typ.) min. 2.0 s VDD (500 A typ.) Oscillator frequency precision: within 150 mW (No corresponding package)

900 kHz typ. (VDD 6 V) Constants changed: Rext 1 % Frequency variability (sample to sample): to 1278 kHz 400 kHz typ. (VDD 6 V) Frequency variability (sample to sample): to 742 kHz (500 k typ.) min. 3.0 s VDD (150 A typ.)

Differences between the LC651154F/1152F and the LC651104F/1102F. The table below lists the points that require care when converting an existing product that uses the LC651104F/1102F to use the LC651154F/1152F.

Parameter Pdmax (1) : DIP Allowable power dissipation Pdmax (2) : MFP Pdmax (3) : SSOP Operating supply voltage Low-level input voltage Oscillator characteristics Ceramic oscillator Oscillator frequency Pull-up resistors A/D converter characteristics AV+ = VDD AV = VSS Package Reference input current IRIF [AV+, AV] Ru [RES] Operating voltage (500 k typ.) AD speed 1/1 : VDD V AD speed 1/2 : VDD (500 A typ.) An SSOP30 version was added. (500 k typ.) AD speed 1/1 : VDD V AD speed 1/2 : VDD (150 A typ.) DIP30S-D, MFP30S VDD VIL(n) 6 V Specifications for VDD 6 V The specifications for VDD 6 V were added. 150 mW (No corresponding package) 6 V Specifications for VDD 6 V


 

Some Part number from the same manufacture Sanyo Semiconductor Corporation
LC651154N 8-channel 8-bit A/D Converter Input, 4/8-bit Serial I/O, Watchdog Timer Reset Option, Package : Dip
LC651154N
LC6511C
LC651202F 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651202F 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC651202L 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651202L 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC651202N 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651202N 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC651204F 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651204F 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC651204L 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651204L 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Versio, Package : Sop
LC651204N 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651204N 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC6512A
LC6512A 4-bit Single-chip Microprocessor For Control-oriented Application
LC6512D
LC651301A
LC651301A 8-channel 8-bit ad Converter Input, 4/8-bit Serial I/O, Watchdog Timer Reset Option, Package : Dip
LC651302A

2SB913 : General-purpose Driver, Package : TO3PB

2SK669 : MOSFET Analog Switching, Package : Spa

LA1193V : High-performance FM Front End For Car Radios, Package : Ssop

LA2805M : Telephone Answering Machine Use

LA73030M :

LC6505D :

LM8062 :

STK2029M :

STK4199MK2 :

LC87F2G08A : CMOS IC 8k-byte FROM and 256-byte RAM Integrated 8-bit 1-chip Microcontroller

LC866116A : CMOS 8-bit Single-chip Microcomputers

2SC5964 : PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications

Same catergory

ATmega8515 : AVR RISC. 8-Kbyte Self-programming Flash Program Memory, 544 Byte Internal + up to 64 Kbyte External SRAM, 512 Byte EePROM. up to 16 Mips Throughput at 16 Mhz..

COP688EB : CISC->COPS. 8-bit CMOS ROM Based Microcontrollers With 8k Memory, CAN Interface, 8-bit A/D, And Usart.

CXP82712/82716 : SPC700 Series. The CXP82712/82716 microcomputer is composed a 8-bit CPU, ROM, RAM, and I/O ports. These chips feature many other high-performance circuits in a single-chip CMOS design, including an A/D converter, serial interface, timer/counter, time base timer, fluorescent display controller/driver, remote control receiver, PWM output circuit and 32kHz timer/counter.

HD6437065 : Others Series. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

KS57C5208 : The Ks57c5204/c5208/c5304/c5308/c5312 Single-chip CMOS Microcontroller Has Been Designed For Highperformance Using Sam 47 Samsung Arrangeable Microcon.

MB89121 : CISC->MB. 8-bit Proprietary Microcontroller CMOS F2mc-8l Mb89120/120a Series.

SAA5496PS : Economy Teletext And TV Microcontrollers. Preliminary Supersedes data of 1997 Jul 07 File under Integrated Circuits, IC02 1998 Dec 14 CONTENTS General Microcontroller Teletext acquisition Teletext Display Additional of SAA529xA devices Additional of SAA549x devices GENERAL Device masking history ORDERING INFORMATION QUICK REFERENCE DATA BLOCK DIAGRAM PINNING INFORMATION Pinning Pin FUNCTIONAL.

TC11IB : 32-bit Single-chip Microcontroller. Edition 2003-11 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 Mnchen, Germany Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including.

TMP47C400 : CISC->TMP. CMOS 4-bit Microcontroller.

TMP90C846 : CISC->TMP. CMOS 8-bit Microcontrollers. 1. Outline and Characteristics The is an advanced 8-bit microcontroller developed for application in the control of HDD/FDD highspeed mechanisms. The built-in functions include a high-speed A/D converter (minimum sampling rate: @ 10MHz) with an external start function, and a D/A converter. The TMP90C846, integrates 8-bit CPU, ROM, RAM, high-speed A/D converter,.

TMS370C156A : CISC. Microcontrollers. CMOS/EEPROM/EPROM Technologies on a Single Device Mask-ROM Devices for High-Volume Production One-Time-Programmable (OTP) EPROM Devices for Low-Volume Production Reprogrammable EPROM Devices for Prototyping Purposes Internal System Memory Configurations On-Chip Program Memory Versions ROM: to 48K Bytes EPROM: to 48K Bytes ROM-less Data.

UPD750006A : 4 Bit Single-chip Microcontroller. The PD750008 is one of the 75XL series 4-bit single-chip microcontrollers, which provide data processing capability equal to that an 8-bit microcontroller. The is an advanced model of the PD75008. It an enhanced CPU function and enables highspeed operation at a low voltage V. It can be substituted for the PD75008. In addition, it is best suited to applications.

UPD750104 : CISC->uPD. 4-bit Single-chip Microcontroller. The PD750108 is one of the 75XL series 4-bit single-chip microcontrollers, which provide data processing capability equal to that an 8-bit microcontroller. The PD750108 is produced by replacing the main system clock oscillator of the mPD750008 with an RC oscillator, enabling operation at a relatively low voltage V. In addition, it is best suited to applications.

W78E365 : ROM Type = Flash EPROM ;; ROM = 64K ;; RAM = 1280 ;; I/o Pins = 32/36 ;; External Memory Space = 64K ;; Speed MHZ = 40 ;; Timer/ Counter = 3 ;; Int = 6/8 ;; Special Function = -multiple-time Programmable -in-system Programming -extra I/o Port, / INT2, /INT3 -wtd -pwm ;; Package = 40.

AT91SAM7S32 : Low pincount Flash microcontrollers based on the 32-bit ARM RISC processor member of a series of low pincount Flash microcontrollers based on the 32-bit ARM RISC processor. It a 32 Kbyte high-speed Flash and an 8 Kbyte SRAM, a large set of peripherals and a complete set of system functions minimizing the number of external components. The device is an ideal.

TMP92CM22FG : TOSHIBA Original CMOS 32-Bit Microcontroller TLCS-900/H1 Series TMP92CM22FG.

MCF51QH128 : MCF51QH128 Advance Information Operating characteristics Voltage range: 1.71 V to 3.6 V Flash write voltage range: 1.71 V to 3.6 V Temperature range (ambient): -40C to 105C.

 
0-C     D-L     M-R     S-Z