Details, datasheet, quote on part number: LC651152L
PartLC651152L
CategoryMicrocontrollers
Description
CompanySanyo Semiconductor Corporation
DatasheetDownload LC651152L datasheet
  

 

Features, Applications

Four-Bit CMOS Microcontrollers for Small-Scale Control Applications

The LC651154N/F/L and the LC651152N/F/L are the small-scale control application versions of Sanyo's LC6500 series of 4-bit single-chip CMOS microcontrollers, and feature the same basic architecture and instruction set. These microcontrollers include 8input 8-bit A/D converter and are appropriate for use in a wide range of applications, from applications with a small number of circuits and controls that were previously implemented in standard logic to applications with a larger scale such as home appliances, automotive equipment, communications equipment, office equipment, and audio equipment such as decks and players. Also note that since these ICs provide the same basic functions (certain functions and specifications do differ) as, and are pin compatible with the earlier LC651104N/F/L and LC651102N/F/L, they can replace those ICs in most cases. All ports: Are I/O ports I/O voltage handling capacity: 15 V (maximum) (Open-drain specification D, E, and F ports only) Output current: 20 mA (maximum) sink current (Are capable of directly driving an LED.) Support options to match application system specifications A. Open-drain output, internal pull-up resistor specification: All ports, in bit units B. Output level at reset specification: Ports C and D can be specified go to the high or low level in 4-bit units. Interrupt function Timer interrupts through an interrupt vector (Can be tested under program control) INT pin and serial I/O full/empty interrupts through an interrupt vector (Can be tested under program control) Stack levels: 8 (Shared with the interrupt system.) Timers: 4-bit variable prescaler and 8-bit programmable timers Clock oscillator options that match a wide range of system specifications Oscillator circuit options: Two-pin RC oscillator (N and L versions) Two-pin ceramic oscillator (N, F, and L versions) Clock divider circuit options: No divider, built-in divide-by-3, built-in divide-by-4 (N and L versions) Continuous square wave output (with a period 64 times the cycle time) A/D converter (successive approximation) 8-bit precision with 8 input channels Watchdog timer

Features

Fabricated in a CMOS process for low power (A standby function that can be invoked under program control is also provided.) ROM/RAM LC651154N/F/L ROM: × 8 bits, RAM: × 4 bits LC651152N/F/L ROM: × 8 bits, RAM: × 4 bits Instruction set: The 80-instruction set common to the LC6500 family Wide operating supply voltage range: V (L versions) Instruction cycle time: µs (F versions) On-chip serial I/O function Flexible I/O ports Number of ports: 6 ports with a total of 22 pins

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

651152L RC circuit time constant Optional watchdog timer reset function from an external pin Function Table

Parameter Memory ROM RAM Instructions Instruction set Table reference Interrupts Timers On-chip functions Stack levels Standby function Number of ports Serial port I/O voltage handling capability I/O ports Output current I/O circuit types Output level at reset Square wave output Minimum cycle time Characteristics Supply voltage Current drain Oscillator Other items Oscillator element Divider circuit option Package × 8 bits × 8 bits × 4 bits (1154/1152N) 80 Supported 1 external, 1 internal 4-bit variable prescaler + 8-bit timers 8 Standby mode entered by the HALT instruction supported 22 I/O port pins Input and output or 8 bit units 15 V max. 10 mA typ. 20 mA max. × 8 bits × 8 bits × 4 bits (1154/1152F) 80 Supported 1 external, 1 internal 4-bit variable prescaler + 8-bit timers 8 Standby mode entered by the HALT instruction supported 22 I/O port pins Input and output or 8 bit units 15 V max. 10 mA typ. 20 mA max. × 8 bits × 8 bits × 4 bits (1154/1152L) 80 Supported 1 external, 1 internal 4-bit variable prescaler + 8-bit timers 8 Standby mode entered by the HALT instruction supported 22 I/O port pins Input and output or 8 bit units 15 V max. 10 mA typ. 20 mA max.

Open drain (n-channel) and pull-up resistor output options can be specified in 1-bit units A high or low level output can be selected in port units (ports C and D only) Supported 2.77 µs (VDD 1.5 mA typ. RC (800/400 kHz typ.) Ceramic k, 1 MHz, 4 MHz) MFP30S, SSOP30 Supported 0.92 µs (VDD 2 mA typ. Ceramic 4 MHz MFP30S, SSOP30 Supported 3.84 µs (VDD 1.5 mA typ. RC (400 kHz typ.) Ceramic k, 1 MHz, 4 MHz) MFP30S, SSOP30

Note: Recommendations for oscillator elements and oscillator circuit constants will be announced as the recommended circuits for these ICs are determined. Verify the progress of these developments periodically.

651152F, 651152L Differences between the LC651154N/1152N and the LC651104N/1102N. The table below lists the points that require care when converting an existing product that uses the LC651104N/1102N to use the LC651154N/1152N.

Parameter Pdmax (1) : DIP Allowable power dissipation Pdmax (2) : MFP Pdmax (3) : SSOP fCFOSC [OSC1, OSC2] Oscillator characteristics Ceramic oscillator Oscillator frequency 2-pin RC oscillator Oscillator frequency fMOSC 160 mW Oscillator frequency precision: within ±2% Changes in the recommended oscillator constants (See table 1.) 800 kHz typ. (VDD 6 V) Constants changed: Rext ±1 % Frequency variability (sample to sample): to 1298 kHz 400 kHz typ. (VDD 6 V) Frequency variability (sample to sample): to 616 kHz Pull-up resistors Serial clock input clock cycle time A/D converter characteristics AV+ = VDD AV­ = VSS Watchdog timer 100 ±1% Package Ru [RES] tCKCY (1) [ SCK] Operating voltage Reference input current IRIF [AV+, AV­] (500 k typ.) min. 2.0 µs VDD (500 µA typ.) Oscillator frequency precision: within 150 mW (No corresponding package)

900 kHz typ. (VDD 6 V) Constants changed: Rext ±1 % Frequency variability (sample to sample): to 1278 kHz 400 kHz typ. (VDD 6 V) Frequency variability (sample to sample): to 742 kHz (500 k typ.) min. 3.0 µs VDD (150 µA typ.)

Differences between the LC651154F/1152F and the LC651104F/1102F. The table below lists the points that require care when converting an existing product that uses the LC651104F/1102F to use the LC651154F/1152F.

Parameter Pdmax (1) : DIP Allowable power dissipation Pdmax (2) : MFP Pdmax (3) : SSOP Operating supply voltage Low-level input voltage Oscillator characteristics Ceramic oscillator Oscillator frequency Pull-up resistors A/D converter characteristics AV+ = VDD AV­ = VSS Package Reference input current IRIF [AV+, AV­] Ru [RES] Operating voltage (500 k typ.) AD speed 1/1 : VDD V AD speed 1/2 : VDD (500 µA typ.) An SSOP30 version was added. (500 k typ.) AD speed 1/1 : VDD V AD speed 1/2 : VDD (150 µA typ.) DIP30S-D, MFP30S VDD VIL(n) 6 V Specifications for VDD 6 V The specifications for VDD 6 V were added. 150 mW (No corresponding package) 6 V Specifications for VDD 6 V


 

Some Part number from the same manufacture Sanyo Semiconductor Corporation
LC651152N 8-channel 8-bit A/D Converter Input, 4/8-bit Serial I/O, Watchdog Timer Reset Option, Package : Dip
LC651152N
LC651154F 8-channel 8-bit A/D Converter Input, 4/8-bit Serial I/O, Watchdog Timer Reset Option, Package : Dip
LC651154F
LC651154L 8-channel 8-bit A/D Converter Input, 4/8-bit Serial I/O, Watchdog Timer Reset Option, Package : Dip
LC651154L
LC651154N 8-channel 8-bit A/D Converter Input, 4/8-bit Serial I/O, Watchdog Timer Reset Option, Package : Dip
LC651154N
LC6511C
LC651202F 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651202F 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC651202L 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651202L 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC651202N 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651202N 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC651204F 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651204F 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip
LC651204L 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651204L 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Versio, Package : Sop
LC651204N 4-bit Single-chip Microcontroller For Small-scale Control Application
LC651204N 4/8-bit Serial I/O, Watchdog Timer Reset Option, The LC65P1104 is Used as The One-time Programmable Prom Version, Package : Dip

2SK1897 : N-channel MOS Silicon Fet, Very High-speed Switching Application

ALP022AGX :

DM1623-7JL7 : 16 Characters X 2 Line Liquid Crystal Dot Matrix Display Module

LA1650 : Self-setting Clock ic For Receiving Time Standard Broadcasts, Package : Dip

LA8615V : Narrow-band Fm-if Amplifier For Pagers, Package : Ssop

LB1806 :

LC78835K :

STK631-010 :

Same catergory

83C51RA+ : 80c51 8-bit Microcontroller Family 8k.64k/256.1k Otp/rom/romless, Low Voltage 2.7v.5.5v, Low Power, High Speed 33 MHZ.

AT48801 : 8 Bit Spread- Spectrum Microcontroller. Compatible with MCS-51TM Products 8K bytes of On-Board Program Memory Fully Static Operation: to 16 MHz x 8 Bit Internal RAM 32 Programmable I/O Lines Three 16 Bit Timer/Counters Eight Interrupt Sources Programmable Serial Channel Low Power Idle and Power Down Modes The is a low-power, high-performance CMOS 8 bit microcomputer with 8K bytes on-board.

ATmega8515 : AVR RISC. 8-Kbyte Self-programming Flash Program Memory, 544 Byte Internal + up to 64 Kbyte External SRAM, 512 Byte EePROM. up to 16 Mips Throughput at 16 Mhz..

GMS81C5108 : Remote Controller->LCD Remote Controller. 8-BIT Single Chip Microcomputers.

HE83540 : with LCD Driver. ROM Type = Mask ;; Application = LCD Driver MCU ;; ROM = 512KB ;; RAM = 4KB ;; I/o = 16~24 ;; LCD = 1024~896.

LC865012B : 8-bit (12288 X 8bit ROM) Single-chip Microcontroller. The LC865020B/16B/12B/08B microcontrollers are 8-bit single-chip microcontrollers with the following on-chip functional blocks CPU : Operable at a minimum bus cycle time 0.5 µs (microsecond) On-chip ROM capacity to 20K bytes On-chip RAM capacity : 384 bytes (LC865020B/16B/12B/08B) 16-bit timer/counter (or two 8-bit timers) 16-bit timer/PWM (or two 8-bit.

MB89051 : Proprietary F2MC-8L Family. Internal Usb Product. The MB89051 series is a general-purpose, single-chip microcontroller that a compact instruction set and contains a range of peripheral function set and timers, serial interface, a PWM timer, the USB hub function and the USB function. The USB hub function, in particular, supports five down ports (one of them is dedicated to an internal function) allowing.

MB91133PBT : 32-bit Risc Microcontroller. The MB91133/MB91F133, a standard single-chip microcontroller featuring various I/O resources and bus control mechanisms to incorporate the control required for high-performance high-speed CPU processes, is the core unit in the 32-bit RISC CPU (FR family). This unit has the optimal s for incorporating applications that require high-performance CPU processing.

PIC18F010 : High Performance Microcontrollers. "All rights reserved. Copyright © 2001, Microchip Technology Incorporated, USA. Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. No representation or warranty is given and no liability is assumed by Microchip Technology Incorporated with respect.

SAB-C505L-4EM : 8-bit Microcontroller With On-chip LCD. C505L Data Sheet Revision History: Previous Releases: Page (new Page (prev. Subjects (changes since last revision) version) - For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://www.infineon.com. Enhanced.

ST2016 : LCD Controller. Working Voltage = 2.4~3.6 ;; ROM = 16 KB ;; RAM = 192B ;; Max. Display Size Com X Seg = 4X40, 8 X 40 ;; I/o = Max.30 I/o (20 Share With LCD 6 Output Only) ;; PWM DAC = Yes ;; LVD = no.

TMS370C340A : 8-bit Microcontroller. CMOS/EEPROM/EPROM Technologies on a Single Device ­ Mask-ROM Devices for High Volume Production ­ One-Time-Programmable (OTP) Devices for Low-Volume Production ­ Reprogrammable EPROM Devices for Prototyping Purposes Flexible Operating ­ Low-Power Modes: STANDBY and HALT ­ Commercial, Industrial, and Automotive Temperature Ranges ­ Clock Options: Divide-by-1.

TMS370Cx8x : CISC. 8-bit Microcontroller. CMOS/ EEPROM/ EPROM Technologies on a Single Device ­ Mask-ROM Devices for High-Volume Production ­ One-Time-Programmable (OTP) EPROM Devices for Low-Volume Production ­ Reprogrammable EPROM Devices for Prototyping Purposes Internal System Memory Configurations ­ On-Chip Program Memory Versions ­ ROM: 4K Bytes ­ EPROM: 16K Bytes ­ Data EEPROM: 256 Bytes.

TS87C54X2 : 8051 Architecture. 8-bit Microcontroller 16 Kbytes Otp. TS80C54/58X2 is high performance CMOS ROM, OTP and EPROM versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS80C54/58X2 retains all of the Atmel Wireless & Microcontrollers 80C51 with extended ROM/EPROM capacity (16/32 Kbytes), 256 bytes of internal RAM, , 4-level interrupt system, an on-chip oscilator and three timer/counters. In addition,.

MPC8560EC : The MPC8560 contains a PowerPC™ processor core. The MPC8560 integrates a processor that implements the PowerPC architecture with system logic required for networking, storage, and general-purpose embedded applications. For functional characteristics of the processor, refer to the MPC8560 PowerQUICC III™ Integrated Communications Processor Reference.

MC9328MXSFS : Freescale Semiconductor’s advanced i.MX family of applications processors helps you quickly harness the power of wireless, broadband, multimedia and the Internet. These processors are designed for use in mobile wireless applications, but are appropriate for many wired applications as well. Freescale’s i.MX applications processors with Smart Speed technology.

HT56RB688 : TinyPowerTM A/D Type Smart Card OTP MCU With LCD, DAC, ISO 7816 And USB Interfaces The TinyPowerTM A/D Type 8-bit high performance RISC architecture microcontroller with LCD/LED driver is specifically designed for applications that interface directly to analog signals and which require an LCD or LED interface. The device includes analog such as an integrated.

 
0-C     D-L     M-R     S-Z