Details, datasheet, quote on part number: P83C528EBA
PartP83C528EBA
Category
TitleCISC->8051/80C51 Family->83CXX/ROM
DescriptionP83C524; P80C528; P83C528; 8-bit Microcontrollers
CompanyPhilips Semiconductors (Acquired by NXP)
DatasheetDownload P83C528EBA datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Product specification File under Integrated Circuits, IC20 1997 Dec 15

CONTENTS FEATURES GENERAL DESCRIPTION QUICK REFERENCE DATA ORDERING INFORMATION BLOCK DIAGRAM FUNCTIONAL DIAGRAM PINNING INFORMATION Pinning Pin description FUNCTIONAL DESCRIPTION General Instruction Set Execution MEMORY ORGANIZATION Program Memory Internal Data Memory Addressing I/O FACILITIES TIMERS/COUNTERS Timer 0 and Timer 1 Timer/Counter Mode Control register (TMOD) Timer/Counter Control Register (TCON) Timer 2 Timer 2 Control Register (T2CON) Capture Mode Automatic Reload Mode Baud Rate Generator Mode Watchdog Timer T3 SERIAL PORT (UART) Serial Port Control Register (SCON) SM0 and SM1 operating modes (SCON) BIT-LEVEL I2C INTERFACE I2C Interrupt Register (S1INT) Single-bit Data Register with I2C Auto-clock (S1BIT) Reading or Writing the S1BIT SFR Control and Status Register for the I2C-bus (S1SCS) INTERRUPT SYSTEM Interrupt Enable Register (IE) Interrupt Priority Register (IP) Interrupt Vectors

IDLE AND POWER-DOWN OPERATION Power Control Register (PCON) Idle Mode Power-down Mode Wake-up from Power-down Mode OSCILLATOR CIRCUIT RESET CIRCUIT Power-on reset INSTRUCTION SET LIMITING VALUES DC CHARACTERISTICS AC CHARACTERISTICS AC Characteristics 16 MHz version AC Characteristics 24 MHz version I2C CHARACTERISTICS (BIT-LEVEL) XTAL1 CHARACTERISTICS SERIAL PORT CHARACTERISTICS TIMING DIAGRAMS Timing symbol definitions PACKAGE OUTLINES SOLDERING Introduction DIP Soldering by dipping or by wave Repairing soldered joints PLCC and QFP Reflow soldering Wave soldering Repairing soldered joints DEFINITIONS LIFE SUPPORT APPLICATIONS PURCHASE OF PHILIPS I2C COMPONENTS

80C51 CPU 32 kbytes on-chip ROM, expandable externally to 64 kbytes Program Memory address space 16 kbytes on-chip ROM, expandable externally from 32 kbytes to 64 kbytes Program Memory address space (address space 32 k not usable) P80C528: ROMless version 32 kbytes on-chip ROM, expandable externally from 32 kbytes to 64 kbytes Program Memory address space EPROM versions are available: see separate data sheet P87C524 and P87C528 512 bytes on-chip RAM, expandable externally to 64 kbytes Data Memory address space Four 8-bit I/O ports Full-duplex UART compatible with the standard 80C51 and the 8052 Two standard 16-bit timer/counters An additional 16-bit timer (functionally equivalent to the timer 2 of the 8052) On-chip Watchdog Timer (WDT) with an own oscillator Bit-level I2C-bus hardware serial I/O Port 7-source and 7-vector interrupt structure with 2 priority levels to 3 external interrupt request inputs Two programmable power reduction modes (Idle and Power-down) Termination of Idle mode by any interrupt, external or WDT (watchdog) reset Wake-up from Power-down by external interrupt, external or WDT reset ROM code protection XTAL frequency range: 3.5 MHz to 16 MHz and 3.5 MHz to 24 MHz All packaging pin-outs fully compatible to the standard 8051/8052.

The P83C524 and P83C528 single-chip 8-bit microcontrollers are manufactured in an advanced CMOS process and are derivatives of the PCB80C51 microcontroller family. These devices provide architectural enhancements that make them applicable in a variety of applications in general control systems, especially in those systems which need a large ROM and RAM capacity on chip. The P83C524 and P83C528 contain a non-volatile 8 respectively 8 read-only program memory, a volatile 512 bytes 8 read/write data memory, four 8-bit I/O ports, two 16-bit timer/event counters (identical to the timers of the a 16-bit timer (identical to the timer 2 of the 8052), a multi-source, two-priority-level, nested interrupt structure, two serial interfaces (UART and bit-level I2C-bus), a watchdog timer (WDT) with a separate oscillator, an on-chip oscillator and timing circuits. For systems that require extra capability, the P83C524 and P83C528 can be expanded using standard TTL compatible memories and logic. The device also functions as an arithmetic processor having facilities for both binary and BCD arithmetic plus bit-handling capabilities. The P83C524 and P83C528 have the same instruction set as the PCB80C51 which consists of over 100 instructions: 49 one-byte, 46 two-byte and 16 three-byte. With a 16 MHz crystal, 58% of the instructions are executed 750 ns and in 1.5 s. Multiply and divide instructions require 3 s.


 

Related products with the same datasheet
P83C524EB
P83C524EBA
P83C524EBB
P83C524EBP
P83C524EF
P83C524EFA
P83C524EFB
P83C524EFP
P83C524FB
P83C524FF
P83C524IB
P83C524IBA
Some Part number from the same manufacture Philips Semiconductors (Acquired by NXP)
P83C528EBB P83C524; P80C528; P83C528; 8-bit Microcontrollers
P83C528FBA CMOS Single-chip 8-bit Microcontroller
P83C528FF P83C524; P80C528; P83C528; 8-bit Microcontrollers
P83C528FFA CMOS Single-chip 8-bit Microcontroller
P83C528IB P83C524; P80C528; P83C528; 8-bit Microcontrollers
P83C550EBAA 80c51 8-bit Microcontroller Family 4k/128 Otp/rom/romless, 8 Channel 8 Bit A/D, Watchdog Timer
P83C552
P83C552EBA Single-chip 8-bit Microcontroller
P83C552EF
P83C552EFA Single-chip 8-bit Microcontroller
P83C552EH
P83C552EHA Single-chip 8-bit Microcontroller
P83C552IB
P83C552IBA Single-chip 8-bit Microcontroller
P83C552IF
P83C552IFA Single-chip 8-bit Microcontroller
P83C552KB
P83C552KBA Single-chip 8-bit Microcontroller
P83C554SBBD 80c51 8-bit Microcontroller . 6 Clock Operation 16k/512 Otp/rom/romless, 7 Channel 10 Bit A/D, I2c, Pwm, Capture/compare, High I/o, 64l LQFP
P83C557
P83C557E4 P83C557E4/P80C557E4/P89C557E4; Single-chip 8-bit Microcontroller

82S23 : 256-bit TTL Bipolar Prom 32 X 8

BAT854SW : BAT854W Series; Schottky Barrier (double) Diodes;; Package: SOT323 (UMT3, CMPAK)

BZW03-C22 : BZW03 Series; Voltage Regulator Diodes

N74ALS564AN : Latch Flip/flop

SAA5542PS : Monitor

SSTVF16857 : DDR PC1600-PC3200 14-bit SSTL_2 Registered Driver With Differential Clock Inputsthe SSTVF16857 is a 14-bit SSTL_2 Registered Driver With Differential Clock Inputs, Designed to Operate Between 2.3 V And 2.7 V. VDDQ Must Not Exceed VCC . Inputs Are SSTL_2 Type With Vref Normally at 0.5*VDDQ . Th

TDA8754HL/25 : TDA8754; Triple 8-bit Video ADC up to 270 Msps;; Package: SOT486-1 (LQFP144)

SC16C754BIB80 : 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs The SC16C754B is a quad universal asynchronous receiver/transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s (3.3 V and 5 V). The SC16C754B offers enhanced features. It has a

SE98PW/1 : SO-DIMM SMBus/I2C-bus temperature sensor General description The SE98 is a JEDEC compliant local temperature sensor specifically designed for higher performance SO-DIMM applications. The temperature sensor is mounted on the SO-DIMM module and communicates with the processor via the I2C-bus/SMBus

UJA1061TW/3V0 : UJA1061; Fault-tolerant CAN/LIN fail-safe system basis chip General description The UJA1061 fail-safe System Basis Chip (fail-safe SBC) replaces basic discrete components which are common in every Electronic Control Unit (ECU) with a Controller Area Network (CAN) and a Local Interconnect Network

DAC1001D125 : Dual 10-bit DAC, Up To 125 Msps The DAC1001D125 is a dual-port high-speed 2-channel CMOS Digital-to-Analog Converter (DAC), optimized for high dynamic performance with low power dissipation. The Supporting an update rate of up to 125 Msps, the DAC1001D125 is suitable for Direct IF applications.

 
0-C     D-L     M-R     S-Z