Details, datasheet, quote on part number: MC14585BFEL
PartMC14585BFEL
CategoryLogic => Comparators
Description4-Bit Magnitude Comparator, Package: Soic, Pins=16
CompanyON Semiconductor
DatasheetDownload MC14585BFEL datasheet
Cross ref.Similar parts: CD4585BNSR, CD40147B, CD4063B, CD4532B, CD74AC283, SN54F283, SN74F283
Quote
Find where to buy
 
  

 

Features, Applications

The MC14585B 4­Bit Magnitude Comparator is constructed with complementary MOS (CMOS) enhancement mode devices. The circuit has eight comparing inputs A0, B0), three cascading inputs = B, and A > B), and three outputs = B, and A > B). This device compares two 4­bit words (A and B) and determines whether they are "less than", "equal to", or "greater than" by a high level on the appropriate output. For words greater than 4­bits, units can be cascaded by connecting outputs (A > B), (A < B), and B) to the corresponding inputs of the next significant comparator. Inputs (A < B), (A = B), and B) on the least significant (first) comparator are connected to a low, a high, and a low, respectively. Applications include logic in CPU's, correction and/or detection of instrumentation conditions, comparator in testers, converters, and controls.

PDIP­16 P SUFFIX CASE 648 MC14585BCP AWLYYWW SOIC­16 D SUFFIX CASE SOEIAJ­16 F SUFFIX CASE 1 A WL, L YY, Y WW, W = Assembly Location = Wafer Lot = Year = Work Week MC14585B ALYW 14585B AWLYWW

Diode Protection on All Inputs Expandable Applicable to Binary or 8421­BCD Code Supply Voltage Range = 3.0 Vdc to 18 Vdc Capable of Driving Two Low­power TTL Loads or One Low­power Schottky TTL Load over the Rated Temperature Range Can be Cascaded ­ See Fig. 3

MAXIMUM RATINGS (Voltages Referenced to VSS) (Note 2.)

Symbol VDD Vin, Vout Iin, Iout PD TA Tstg TL Parameter DC Supply Voltage Range Input or Output Voltage Range (DC or Transient) Input or Output Current (DC or Transient) per Pin Power Dissipation, per Package (Note 3.) Ambient Temperature Range Storage Temperature Range Lead Temperature (8­Second Soldering) Value ­0.5 to VDD +150 260 Unit V

1. For ordering information on the EIAJ version of the SOIC packages, please contact your local ON Semiconductor representative.

2. Maximum Ratings are those values beyond which damage to the device may occur. 3. Temperature Derating: Plastic "P and D/DW" Packages: ­ 7.0 mW/_C From To 125_C This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high­impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS v (Vin or Vout) v VDD. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD). Unused outputs must be left open.

(A = B)out (A u B)in (A t B)in (A = B)in A1 VSS VDD (A u B)out (A t B)out A0 B1

4. Data labelled "Typ" is not to be used for design purposes but is intended as an indication of the IC's potential performance. 5. The formulas given are for the typical characteristics only 6. To calculate total supply current at loads other than 50 pF: IT(CL) = IT(50 pF) + (CL ­ 50) Vfk where: in µA (per package), CL in pF, V = (VDD ­ VSS) in volts, f in kHz is input frequency, and = 0.001.


 

Related products with the same datasheet
MC14585BDR2
Some Part number from the same manufacture ON Semiconductor
MC14585BFR1 4-Bit Magnitude Comparator , Package: Pdip, Pins=16
MC1458C Dual Operational Amplifier, Internally Compensated
MC1458CD
MC14598B 8-bit Bus-compatible Latches
MC14598BCP 9-Bit Bus-compatible Latches , Package: Pdip, Pins=18
MC1488 Quad Line Driver
MC1488D Quad Line EIA-232D Driver, Package: Soic, Pins=14
MC1488P Quad Line EIA-232D Driver , Package: Pdip, Pins=14
MC1489 Quad Line Receivers
MC1489AD Quad Line EIA-232D Receiver, Package: Soic, Pins=14
MC1489AP Quad Line EIA-232D Receiver , Package: Pdip, Pins=14
MC1489D Quad Line EIA-232D Receiver, Package: Soic, Pins=14
MC1489P Quad Line EIA-232D Receiver , Package: Pdip, Pins=14
MC1494 Linear Four-quadrant Multiplier
MC1495 Wideband Linear Four-quadrant Multiplier
MC1496 Balanced Modulatosr/demodulators
MC1496BD Balanced Modulators/Demodulators, Package: Soic, Pins=14
MC1496BP Balanced Modulators/demodulators , Package: Pdip, Pins=14
MC1496D Balanced Modulators/Demodulators, Package: Soic, Pins=14
MC1496P Balanced Modulators/demodulators , Package: Pdip, Pins=14
MC14C88B Quad Low Power Line Driver

NCR169DRLRM : Sensitive Gate Silicon Controlled Rectifier, Package: TO-92 (TO-226), Pins=3

P6SMB18AT3 : High Power Transient Suppressor

LP2950-50-T92-B : 100 mA, Low Power Low Dropout Voltage Regulator

P6SMB82ACA : 600 Watt Peak Power Zener Transient Voltage Suppressors

NBXMBB024LNHTAG : 2.5V / 3.3 V, 622.08 MHz PureEdge Single Frequency LVPECL Crystal Oscillator Clock Module The single frequency, crystal oscillator (XO) is designed to meet today\'s requirements for 2.5 V / 3.3 V LVPECL clock generation applications. The device uses a high Q fundamental crystal and Phase Lock Loop

NE592N8 : Linear - Amplifier - Video Amp And Module Integrated Circuit (ics) Differential Tube 18mA ±3 V ~ 8 V; IC AMP VIDEO 2STAGE DIFF 8-DIP Specifications: Applications: General Purpose ; -3db Bandwidth: - ; Slew Rate: - ; Number of Circuits: 1 ; Current - Supply: 18mA ; Current - Output / Channel: - ; Voltage - Supply, Single/Dual (±): ±3 V ~ 8 V ; Output Type: Differential ; Package / Case: 8-DIP (0.300", 7.62mm) ; Packaging: Tube ; L

CAV24C02YE-GT3 : Memory Integrated Circuit (ics) EEPROM Tape & Reel (TR) 2.5 V ~ 5.5 V; IC EEPROM I2C SRL 2KB 8TSSOP Specifications: Memory Type: EEPROM ; Memory Size: 2K (256 x 8) ; Speed: 100kHz, 400kHz ; Interface: I&sup2;C, 2-Wire Serial ; Package / Case: 8-TSSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Voltage - Supply: 2.5 V ~ 5.5 V ; Operating Temperature: -40°C ~ 125°C ; Format - Memo

NOIV1SN025KA-GDC : Image, Camera IC IMAGE SENSOR 25MP 355PGA -; IC IMAGE SENSOR 25MP 355PGA Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

LV8743V-TLM-E : Pmic - Motor And Fan Controllers, Driver Integrated Circuit (ics) Cut Tape (CT) 500mA 4.5 V ~ 5.5 V; IC STEPPING MOTOR DVR 44SSOP Specifications: Applications: PWM Motor Driver, Stepper Motor Driver ; Number of Outputs: 1 ; Voltage - Supply: 4.5 V ~ 5.5 V ; Voltage - Load: 10 V ~ 35 V ; Current - Output: 500mA ; Operating Temperature: -20°C ~ 85°C ; Package / Case: 44-LSSOP (0.220", 5.60mm Width) Exposed Pad ; Packaging: Cut T

NCP6338 : 6 A Processor Supply with Dynamic Voltage Scaling, I2C Programming and Remote Sense The NCP6338 is a synchronous buck converter optimized to supply recent micro processors (ARM core processor, GPU) that demand high power at low voltages of portable applications powered by one cell Li-ion or three cell Alkaline/NiCd/NiMH batteries. The device is able to deliver up to 6 A of progra

 
0-C     D-L     M-R     S-Z