Details, datasheet, quote on part number: NTE5224A
PartNTE5224A
CategoryDiscrete => Diodes & Rectifiers => Voltage Regulators
DescriptionZener Diode, 10 Watt, +-5% Tolerance. Nominal Zener Voltage VZ = 3.9V. Zener Test Current Izt = 640mA.
CompanyNTE Electronics, Inc.
DatasheetDownload NTE5224A datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Features: D Zener Voltage D DO4 Stud Mount Package Absolute Maximum Ratings: Forward Voltage (IF = 2A), VF. 1.5V DC Power Dissipation, PD. 10W Derate Above 50C. 80mW/C Operating Junction Temperature Range, Topr. to +175C Storage Temperature Range, Tstg. to +175C Electrical Characteristics: (TC = +30C, unless otherwise specified)

Electrical Characteristics (Cont'd): (TC = +30C, unless otherwise specified)

Nominal Zener Voltage Vz @ Izt (Note 2) Volts 8.7 Zener Test Current (Izt) mA 290 Maximum Dynamic Impedance (Note 3) Zzt @ Izt Ohms 1.7 Zzk @ 1mA (Izk) Ohms 250 Maximum DC Zener Current* (Izm) (Note mA 1000 Typical Temperature Coefficient vz %/C.049 Maximum Leakage Current VR A Volts 37 6.6

Nominal Zener Voltage Vz @ Izt (Note 2) Volts Zener Test Current (Izt) mA Maximum Dynamic Impedance (Note 3) Zzt @ Izt Ohms Zzk @ 1mA (Izk) Ohms Maximum DC Zener Current* (Izm) (Note 4) mA Typical Temperature Coefficient vz %/C Maximum Leakage Current VR A Volts

* Stud Temperature = +75C Note 1. The NTE type 10W Zener Diodes listed have Anode (Standard Polarity) connected to stud. Add suffix letter "K" to the device number for Cathode (Reverse Polarity) connected to stud (i. e. NTE5174AK). Note 2. The electrical characteristics are measured after allowing the device to stabilize for 90 seconds with +30C base temperature. Note 3. The zener impedance (Zzt) is derived from the 60Hz AC voltage, which results when an AC current having an RMS value equal 10% of the DC zener current (IZT or IZK) is superimposed on IZT or IZK. When making zener impedance measurements at the IZK test point, it may be necessary to insert a 60Hz band pass filter between the diode and voltmeter to avoid errors resulting from low level noise signals. Note 4. These values of IZM may be exceeded in the case of individual diodes. The values shown are calculated for the worst case which is a unit of 5% tolerance at the high voltage and of its tolerance range. Allowance has also been made for the rise in zener voltage above VZT, which results from zener impedance and the increase in junction temperature as power dissipation approaches 10 watts.


 

Related products with the same datasheet
NTE5175A
NTE5176A
NTE5177A
NTE5178A
NTE5179A
NTE5180A
NTE5181A
NTE5182A
NTE5183A
NTE5184A
NTE5185A
NTE5186A
Some Part number from the same manufacture NTE Electronics, Inc.
NTE5225A Zener Diode, 10 Watt, +-5% Tolerance. Nominal Zener Voltage VZ = 3.9V. Zener Test Current Izt = 640mA.
NTE5240A 50 Watt Zener Diode, +-5% Tolerance. Nominal Zener Voltage VZ = 3.9V. Zener Test Current Izt = 3200mA.
NTE524V13 Metal Oxide Varistors ( Mov )
NTE524V48
NTE525 Silicon Diode. High Voltage, Fast Recovery Switch.
NTE5250A 50 Watt Zener Diode, +-5% Tolerance. Nominal Zener Voltage VZ = 3.9V. Zener Test Current Izt = 3200mA.

NTE189 : Silicon Complementary Transistors High Voltage Amplifier & Driver

NTE1909 : NTE1909, Integrated Circuit Negative 3 Terminal Voltage Regulator,

NTE6035 : Industrial Silicon Recfifier. Anode to Case. Max Peak Repetitive Reverse Voltage 400V. Max Average Forward Current 60A.

NLE-L4R7M168X11.5F : Miniature Aluminum Electrolytic Capacitors

SI18000M80 : Snap-in Mount Aluminum Electrolytic

NTE30108 : LED − Dual Color 5mm Yellow/yellow Green

JT-004 : Butane FUEL Contained IN J-300 & Jt-004

NPR0.47M16 : Non−polar Aluminum Electrolytic

R51-5D40-12 : AUTOMOTIVE RELAY, SPDT, 12VDC, 50A Specifications: Coil Voltage VDC Nom: 12V ; Contact Current Max: 50A ; Contact Voltage AC Nom: - ; Contact Voltage DC Nom: 14V ; Coil Resistance: 90ohm ; Contact Configuration: SPDT ; Relay Mounting: Panel ; External Height: 25.2mm ; External Width: 28.5mm ; External Depth: 28.5mm

R53-5D20-12 : NTE Replacement Parts RELAY 12VDC SPDT 20A Specifications: Manufacturer: NTE ; RoHS:  Details ; Factory Pack Quantity: 1

 
0-C     D-L     M-R     S-Z