Details, datasheet, quote on part number: MAX1489E
PartMAX1489E
CategoryInterface and Interconnect
Description15kV ESD-Protected, Quad, Low-power RS-232 Line Receiver
CompanyMaxim Integrated Products
DatasheetDownload MAX1489E datasheet
Cross ref.Similar parts: MC1489, SN75189
Quote
Find where to buy
 
  

 

Features, Applications

The MAX1489E quad, low-power line receiver is designed for EIA/TIA-232, EIA/TIA-562, and CCITT V.28 communications in harsh environments. Each receiver input is protected against 15kV electrostatic discharge (ESD) shocks. These inputs have a 25V range and feature hysteresis and time-domain filtering. The outputs are TTL and CMOS compatible. The MAX1489E has a 120kbps guaranteed data rate. Supply current is typically 350A. The MAX1489E is pin compatible with the SN75C189, DS1489, and It is available in 14-pin plastic DIP and SO packages.

o Enhanced ESD Protection: 15kV--Human Body Model 8kV--IEC1000-4-2, Contact Discharge 15kV--IEC1000-4-2, Air-Gap Discharge o Latchup Free During an ESD Event o Low 350A Supply Current o Input Hysteresis and Time-Domain Filtering Eliminate the Need for External Filtering o Stable Input Thresholds o Pin Compatible with SN75C189, DS1489, and DS14C89

PC Motherboards Modems Interfacing Data Terminal Equipment (DTE) with Data Circuit-Terminating Equipment (DCE) Equipment Meeting IEC1000-4-2 (formerly or 15kV ESD Protection

PART MAX1489EEPD MAX1489EESD TEMP RANGE to +85C PIN-PACKAGE 14 Plastic DIP 14 SO Dice* 14 Plastic DIP 14 SO

INPUT A 1 TTL/CMOS LOGIC INTERCONNECTING CABLE TTL/CMOS LOGIC N.C. 2 OUTPUT A 3 INPUT B 4 N.C. 1/4 MAX1489E SIGNAL GROUND PC MOTHERBOARD (DTE) MODEM (DCE) 1/4 MAX1488E OUTPUT B 6 GND 7

14 VCC 13 INPUT D 12 N.C. 11 OUTPUT D 10 INPUT 9 8 N.C. OUTPUT C

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

Supply Voltage (VCC).............................................................+7V Input Voltage (VIN)...............................................................30V Output Short-Circuit Current (Shorted to GND or VCC) (Note 1)............................Self Limiting Continuous Power Dissipation (TA = +70C) Plastic DIP (derate 10.00mW/C above +70C)..........800mW SO (derate 8.7mW/C above +70C)...........................695mW Operating Temperature Ranges to +85C Storage Temperature to +160C Lead Temperature (soldering, 10s).................................+300C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(VCC TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +25C.) PARAMETER DC CHARACTERISTICS Output Voltage High Output Voltage Low Output Short-Circuit Current (Note 1) Supply Current Input Voltage Range Input Voltage High Input Voltage Low Input Hysteresis Input Resistance TIMING CHARACTERISTICS Output Propagation Delay, Low to High Output Propagation Delay, High to Low Output Propagation Delay Skew, ItPLH - tPHLI Output Transition Time Input Noise Rejection Guaranteed Data Rate ESD CHARACTERISTICS Human Body Model ESD Protection IEC1000-4-2 (Contact Discharge) IEC1000-4-2 (Air-Gap Discharge) Note 1: Only one output may be shorted at a time. Note 2: See Noise Pulse Rejection graph in Typical Operating Characteristics section. 15 kV tPLH tPHL tSKEW tTR tN DR Figure 1 Figure 1 Figure 1 VOUT to 90% Pulse amplitude = 5V (Note ns s kbps VOH VOL IOS ICC VIN VIH VIL VHYST RIN VIN 0.4V IOUT = -20A IOUT mA A SYMBOL CONDITIONS MIN TYP MAX UNITS

FUNCTION Receiver Inputs No Connect--not internally connected Receiver Outputs Ground

 

Related products with the same datasheet
MAX1489EC
MAX1489EC/D
MAX1489ECPD
MAX1489ECSD
MAX1489EE
MAX1489EEPD
MAX1489EESD
MAX1489ECSD+T
MAX1489EESD+T
Some Part number from the same manufacture Maxim Integrated Products
MAX1489EC 15kV ESD-Protected, Quad, Low-power RS-232 Line Receiver
MAX148A +2.7V to +5.25V Low-power 8-Channel Serial 10-Bit ADCs
MAX1490A Complete, ISOlated RS-485/RS-422 Data Interface
MAX1490E 15kV ESD-Protected, ISOlated RS-485/RS-422 Data Interfaces
MAX1491 MAX1491, MAX1492, MAX1493, MAX1494 Preliminary Product Information: Sigma Delta ADC With LCD Display Drivers
MAX1491CAI 3.5- And 4.5-digit, Single-chip ADCs With LCD Drivers
MAX1492 MAX1491, MAX1492, MAX1493, MAX1494 Preliminary Product Information: Sigma Delta ADC With LCD Display Drivers
MAX1493CCJ 3.5- And 4.5-digit, Single-chip ADCs With LCD Drivers
MAX1494 MAX1491, MAX1492, MAX1493, MAX1494 Preliminary Product Information: Sigma Delta ADC With LCD Display Drivers
MAX1495 3.5- And 4.5-Digit, Single-chip ADCs With LCD Drivers
MAX1495CCJ 3.5- And 4.5-digit, Single-chip ADCs With LCD Drivers
MAX1496 3.5- And 4.5-Digit, Single-chip ADCs With Led Drivers
MAX1497 3.5- And 4.5-Digit, Single-chip ADCs With Led Drivers And C Interface<<<>>>low-power, 3.5- And 4.5-digit, Analog-to-digital Converters (ADCs) With Integrated Lightemitting Diode (LED) Drivers Operate
MAX1498 3.5- And 4.5-Digit, Single-chip ADCs With Led Drivers
MAX1499 3.5- And 4.5-Digit, Single-chip ADCs With Led Drivers And C Interface<<<>>>low-power, 3.5- And 4.5-digit, Analog-to-digital Converters (ADCs) With Integrated Lightemitting Diode (LED) Drivers Operate
MAX149A +2.7V to +5.25V Low-power 8-Channel Serial 10-Bit ADCs
MAX150 CMOS, 1.3 s, 8-Bit ADC With Voltage Reference And Track/hold
MAX1501 MAX1501 Highly Integrated, Linear Battery Charger With Thermal Regulation For Portable Applications
MAX1501EVKIT MAX1501EVKIT Evaluation Kit For The MAX1501
MAX1507 MAX1507 Linear Li+ Battery Charger With Integrated Pass Fet And Thermal Regulation in a 3mm X 3mm Thin DFN
MAX1507EVKIT MAX1507/MAX1508EVKIT Evaluation Kit For The MAX1507/MAX1508

MAX1483 : 20 A, 1/8-Unit Load, Slew-rate Limited, RS-485 Transceivers

MAX312E : 10, Quad, Spst, CMOS Analog Switches

ICL7642BCJE : Single/dual/triple/quad Operational Amplifiers

MAX6386XS25D3-T : Sc70, Single/dual Low-voltage, Low-power P Reset Circuits

MAX5389MAUD+ : Dual, 256-Tap, Volatile, Low-Voltage Linear Taper Digital Potentiometer The MAX5389 dual, 256-tap, volatile, low-voltage linear taper digital potentiometer offers three end-to-end resistance values of 10k?, 50k?, and 100k?. Operating from a single +2.6V to +5.5V power supply, the device provides a

MAX817LCSA+T : Pmic - Supervisor Integrated Circuit (ics) Battery Backup Circuit Tape & Reel (TR) 1; IC SUPERVISOR MPU 5V 8-SOIC Specifications: Output: - ; Reset: Active Low ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 140 ms Minimum ; Type: Battery Backup Circuit ; Voltage - Threshold: 4.65V ; Operating Temperature: 0C ~ 70C ; Lead Fre

MAX6477BL16AD4 : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, PBGA6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: Other, 3 X 3 MM, UCSP-6 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

MAX8882EUTJ5+T : DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: SOT23, Other, MINIATURE, SOT-23, 6 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 2.42 to 2.55 volts ; IOUT: 0.1600 amps ; VIN: 2.5 to 6.5 volts ; Dropout Voltage: 0.1440 volts

Same catergory

AAT4625IAS-1-B1 : Usb Single-channel Power Switch. The AAT4625 SmartSwitchTM is part of AnalogicTech's Application Specific Power MOSFETTM (ASPMTM) product family. a 1.0A Current Limited P-channel, MOSFET power switch designed for high-side load-switching applications. This switch operates with inputs ranging from to 5.5V, making it ideal for both 3V and 5V systems. An integrated current-limiting circuit.

AT43312A : Self- And Bus- Powered Usb Hub Controller. Full Compliance with USB Spec Rev 1.1 Four Downstream Ports Full-speed and Low-speed Data Transfers Bus-powered Controller Bus-powered or Self-powered Hub Operation Per Port Overcurrent Monitoring Individual Port Power Control USB Connection Status Indicators 5V Operation with On-chip 3.3V Format 32-lead SOIC and LQFP The a 5 port USB hub chip supporting.

BU8317KV : Panel Interface For Telephones. The is a large-scale integrated circuit which enables a serial input / output interface between the key input required for panel boards used in PHS systems, portable telephones, and telephone answering machines and LED and LCD control functions. It reduces the number of wiring harnesses needed between the main board in the telephone and the panel board,.

CDC318A : 1-line to 18-line Clock Driver With I*2c Control Interface. High-Speed, Low-Skew 1-to-18 Clock Buffer for Synchronous DRAM (SDRAM) Clock Buffering Applications Output Skew, tsk(o), Less Than 250 ps Pulse Skew, tsk(p), Less Than 500 ps Supports up to Four Unbuffered SDRAM Dual Inline Memory Modules (DIMMs) I2C Serial Interface Provides Individual Enable Control for Each Output Operates 3.3 V Distributed VCC and Ground.

DS3695 : DS3695 - Multipoint RS-485/RS-422 Transceivers, Package: Mdip, Pin Nb=8.

DS89C386 : DS89C386 - Twelve Channel CMOS Differential Line Receiver, Package: SSOP-EIAJ, Pin Nb=48.

EDGEPORT/4 : Usb to 4 Port Rs-232 Converter. The EDGEPORT product line of USB to serial converters are intelligent, stackable expansion modules designed for the enterprise user who requires reliability in mission-critical applications. The EDGEPORT products connect to a PC, thin client, or server via the Universal Serial Bus (USB) port, providing instant COM port expansion for peripheral device.

EL2142C : Receiver. 150 MHZ Differential Line Receiver. Differential input range 3V 150 MHz 3 dB bandwidth V ms slewrate g 5V supplies or single supply 50 mA minimum output current Output swing (100X load) to within 5V of supplies Low power 11 mA typical The is a very high bandwidth amplifier designed to extract the difference signal from noisy environments and is thus primarily targeted for applications.

IDT74FCT162H245ET : Fast CMOS 16-bit Bidirectional Transceivers. Common : 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) Packages include 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack.

LMS1485 : LMS1485 - 5V Low Power RS-485 Differential Bus Transceiver, Package: Soic Narrow, Pin Nb=8.

LTC1318 : LTC1318, Single 5V RS232/RS422/AppleTalk Dce Transceiver. The is a single 5V, RS232/RS422 transceiver for connection to the DCE, or peripheral side of an interface link. It includes an on-board charge pump to generate 8V supply which allows true RS232 output swings. The charge pump requires only four external 0.1F capacitors. The LTC1318 includes two RS232 drivers, a differential RS422 driver, a dedicated.

LTC1518 : LTC1518, 52Mbsp Quad Receivers, 75173/26LS32 Pinout. Precision Propagation Delay: 3.5ns Over to 70C Temperature Range High Data Rate: 52Mbps Low tPLH/tPHL Skew: 500ps Typ Low Channel-to-Channel Skew: 500ps Typ Guaranteed Fail-Safe Operation over the Entire Common Mode Range 12V RS485 Input Common Mode Range Input Resistance 22k, Even When Unpowered Hot SwapTM Capable High Common Mode Rejection to 26MHz.

SLE24C164-D : 16 Kbit 2048 X 8 Bit Serial CMOS EePROMs, I2c Synchronous 2-wire Bus. SLx 24C164 16 Kbit 8 bit) Serial CMOS-EEPROM with I2C Synchronous 2-Wire Bus SLx 24C164 Revision History: Previous Version: Page (in previous (in current Version) Current Version: 1998-07-27 06.97 Subjects (major changes since last revision) Text was changed to "Typical programming time 5 ms for to 16 bytes". WP = VCC protects the upper half entire.

SN65LVDS1050 : High-speed Differential Line Drivers And Receivers. Typically Meets or Exceeds ANSI TIA/EIA-644-1995 Standard Operates From a Single to 3.6-V Supply Signaling Rates to 400 Mbit/s Bus-Terminal ESD Exceeds 12 kV Low-Voltage Differential Signaling With Typical Output Voltages 285 mV and a 100 Load Propagation Delay Times Driver: 1.7 ns Typ Receiver: 3.7 ns Typ Power Dissipation at 200 MHz Driver:.

SN75189AD : ti SN75189A, Quadruple Line Receiver. Input Resistance. 7 k Input Signal Range. 30 V Operate From Single 5-V Supply Built-In Input Hysteresis (Double Thresholds) Response Control that Provides: Input Threshold Shifting Input Noise Filtering Meet or Exceed the Requirements of TIA / EIA-232-F and ITU Recommendation V.28 Fully Interchangeable With MotorolaTM MC1489 and MC1489A The NS package.

UCC5641PW24 : SCSI Bus Termination. ti UCC5641, 9 Line 2.7-5V LVD Terminator For Ultra2 Through Ultra320 Scsi With Reverse Disconnect.

XRT82D20 : Single Channel E1 Line Interface Unit. The is a fully integrated, single channel, line interface Transceiver for E1 (2.048 Mbps) applications. The LIU IC consists of a receiver with adaptive data slicer for accurate data and clock recoveries and a transmitter which accepts either single or dual-rail digital input for signal transmission to the line using a low- impedance differential line.

SP3081E : * Full Duplex RS485 Transceiver * 5.0V Single Supply Operation * Slew rate controlled driver, Low EMI * 115kbps data rate * Receiver failsafe on open, short or terminated lines * 1/8th Unit Load, 256 transceivers on bus * Hot Swap glitch protection on control inputs * Driver short circuit current limit and thermal shutdown for overload protection * Ultra-low.

ISL3294E : 16.5kV ESD Protected, +125C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low Power, RS-485/RS-422 Transmitters The Intersil ISL3293E, ISL3294E, ISL3295E, ISL3296E, ISL3297E, ISL3298E are 16.5kV HBM ESD Protected (7kV IEC61000 contact), 3.0V to 5.5V powered, single transmitters for balanced communication using the RS-485 and RS-422 standards. These drivers.

STUSB06E : Interface ICs 3.3 V USB transceiver. Compliant to USB v2.0 for full-speed (12 Mb/s) and low-speed (1.5 Mbps) operation HBM kV on D+, D- lines, kV on VREG 6 kV ESD compliant IEC-61000-4-2 on D+, D-, VREG lines Separate I/O supply with operation down 1.6 V Integrated 150 k switchable pull-up from D+ to VREG Supports host negotiation protocol (DP pull-up auto-connection after SE0) SEO active.

 
0-C     D-L     M-R     S-Z