Details, datasheet, quote on part number: MAX146BEAP
PartMAX146BEAP
CategoryData Conversion => ADC (Analog to Digital Converters)
Description+2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
CompanyMaxim Integrated Products
DatasheetDownload MAX146BEAP datasheet
Quote
Find where to buy
 
  

 

Features, Applications

o 8-Channel Single-Ended or 4-Channel Differential Inputs o Single-Supply Operation (MAX147) o Internal 2.5V Reference (MAX146) o Low Power (133ksps, 3V supply) (1ksps, 3V supply) 1A (power-down mode) SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface o Software-Configurable Unipolar or Bipolar Inputs o 20-Pin DIP/SSOP Packages

The MAX146/MAX147 12-bit data-acquisition systems combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. The MAX146 operates from a single to +3.6V supply; the MAX147 operates from a single to +5.25V supply. Both devices' analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation. The 4-wire serial interface connects directly to SPITM/ QSPITM and MICROWIRETM devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX146/MAX147 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The MAX146 has an internal 2.5V reference, while the MAX147 requires an external reference. Both parts have a reference-buffer amplifier with a 1.5% voltageadjustment range. These devices provide a hard-wired SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX146/MAX147, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60A at reduced sampling rates. The MAX146/MAX147 are available in 20-pin DIP and SSOP packages. For 4-channel versions of these devices, see the MAX1246/MAX1247 data sheet.

PART MAX146BCAP MAX146BC/D TEMP RANGE to +70C PIN-PACKAGE 20 Plastic DIP 20 Plastic DIP 20 SSOP 20 SSOP Dice* INL (LSB)

Ordering Information continued at end of data sheet. *Dice are specified +25C, DC parameters only.

Portable Data Logging Medical Instruments Pen Digitizers Data Acquisition Battery-Powered Instruments Process Control

CH7 COM CS SCLK DIN I/O SCK (SK) MOSI (SO) MISO (SI) VSS

SPI and QSPI are registered trademarks of Motorola, Inc. MICROWIRE is a registered trademark of National Semiconductor Corp. Maxim Integrated Products 1

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

VDD to AGND, DGND................................................. to 6V AGND to DGND...................................................... 0.3V CH0CH7, COM to AGND, DGND............ -0.3V to (VDD + 0.3V) VREF, REFADJ to AGND........................... -0.3V to (VDD + 0.3V) Digital Inputs to DGND.............................................. to 6V Digital Outputs to DGND........................... -0.3V to (VDD + 0.3V) Digital Output Sink Current.................................................25mA Continuous Power Dissipation (TA = +70C) Plastic DIP (derate 11.11mW/C above +70C)......... 889mW SSOP (derate 8.00mW/C above +70C)................... 640mW CERDIP (derate 11.11mW/C above +70C).............. 889mW Operating Temperature Ranges to +125C Storage Temperature Range............................ to +150C Lead Temperature (soldering, 10s)................................ +300C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(VDD +3.6V (MAX146); VDD +5.25V (MAX147); COM = 0; fSCLK = 2.0MHz; external clock (50% duty cycle); 15 clocks/conversion cycle (133ksps); MAX146--4.7F capacitor at VREF pin; MAX147--external reference, VREF 2.500 V applied to VREF pin; TA = TMIN to TMAX; unless otherwise noted.) PARAMETER DC ACCURACY (Note 1) Resolution Relative Accuracy (Note 2) No Missing Codes Differential Nonlinearity Offset Error Gain Error (Note 3) Gain Temperature Coefficient Channel-to-Channel Offset Matching INL NMC DNL MAX14_B MAX147C Bits LSB ppm/C LSB Bits LSB SYMBOL CONDITIONS MIN TYP MAX UNITS

DYNAMIC SPECIFICATIONS (10kHz sine-wave input, 133ksps, 2.0MHz external clock, bipolar input mode) 70 73 Signal-to-Noise + Distortion Ratio SINAD MAX147C 73 Total Harmonic Distortion Spurious-Free Dynamic Range Channel-to-Channel Crosstalk Small-Signal Bandwidth Full-Power Bandwidth CONVERSION RATE Internal clock, SHDN = FLOAT Conversion Time (Note 5) tCONV Internal clock, SHDN = VDD External clock 2MHz, 12 clocks/conversion s THD SFDR Up to the 5th harmonic 65kHz, 2.500Vp-p (Note 4) -3dB rolloff MAX147C dB MHz

(VDD +3.6V (MAX146); VDD +5.25V (MAX147); COM = 0; fSCLK = 2.0MHz; external clock (50% duty cycle); 15 clocks/conversion cycle (133ksps); MAX146--4.7F capacitor at VREF pin; MAX147--external reference, VREF 2.500 V applied to VREF pin; TA = TMIN to TMAX; unless otherwise noted.) PARAMETER Track/Hold Acquisition Time Aperture Delay Aperture Jitter Internal Clock Frequency External Clock Frequency ANALOG/COM INPUTS Input Voltage Range, SingleEnded and Differential (Note 6) Multiplexer Leakage Current Input Capacitance INTERNAL REFERENCE (MAX146 only, reference buffer enabled) VREF Output Voltage = +25C VREF Short-Circuit Current MAX146_C VREF Temperature Coefficient Load Regulation (Note 7) Capacitive Bypass at VREF Capacitive Bypass at REFADJ Adjustment Range EXTERNAL REFERENCE AT VREF (Buffer disabled) VREF Input Voltage Range (Note 8) VREF Input Current VREF Input Resistance Shutdown VREF Input Current REFADJ Buffer Disable Threshold EXTERNAL REFERENCE AT REFADJ Capacitive Bypass at VREF Reference Buffer Gain REFADJ Input Current Internal compensation mode External compensation mode MAX147 F V/V A VDD 0.5 VREF = 2.5V VDD to 0.2mA output load Internal compensation mode External compensation mode Unipolar, COM = 0V Bipolar, COM = VREF / 2 On/off leakage current, VCH_ 0V or VDD F % ppm/C 0 to VREF V VREF V mA SHDN = FLOAT SHDN = VDD 0.1 Data transfer only 0 SYMBOL tACQ CONDITIONS MIN TYP MAX 1.5 UNITS ns ps MHz


 

Related products with the same datasheet
MAX1460C
MAX146AC
MAX146ACAP
MAX146ACPP
MAX146AE
MAX146AEAP
MAX146AEPP
MAX146AM
MAX146AMJP
MAX146BC
MAX146BC/D
MAX146BCAP
Some Part number from the same manufacture Maxim Integrated Products
MAX146BEPP +2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
MAX146EVKIT MAX146EVKIT, MAX147EVKIT Evaluation System/evaluation Kits For The MAX146/MAX147
MAX147 +2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
MAX1470 MAX1470 315MHz Low-Power, +3V Superheterodyne Receiver
MAX1470EVKIT MAX1470EVKIT Evaluation Kit For The MAX1470
MAX1471 315MHz/434MHz Low-Power, 3V/5V Ask/fsk Superheterodyne Receiver <<<>>><<<>>>The MAX1471 Low-power, CMOS, Superheterodyne, RF Dual-channel Receiver is Designed to Receive Both Amplitude- Shift-keyed (ASK)
MAX1472 MAX1472 300MHz-to-450MHz Low-Power, Crystal-based Ask Transmitter
MAX1472EVKIT MAX1472EVKIT Evaluation Kit For The MAX1472
MAX1473 MAX1473 315MHz/433MHz, Ask, Superheterodyne Receiver With Extended Dynamic Range
MAX1474 MAX1474 Miniature Electronically Trimmable Capacitor
MAX1478 1% Accurate, Digitally Trimmed, Rail-to-rail Sensor Signal Conditioner
MAX1479 300MHz to 450MHz Low-Power, Crystal-based +10dBm Ask/fsk Transmitter <<<>>>The MAX1479 Crystal-referenced Phase-locked-loop (PLL) VHF/uhf Transmitter is Designed to Transmit Ask, Ook, And FSK Data in The 300MHz
MAX147AC +2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
MAX147EVKIT MAX146EVKIT, MAX147EVKIT Evaluation System/evaluation Kits For The MAX146/MAX147
MAX148 +2.7V to +5.25V Low-power 8-Channel Serial 10-Bit ADCs
MAX1480A Complete, ISOlated RS-485/RS-422 Data Interface
MAX1480E 15kV ESD-Protected, ISOlated RS-485/RS-422 Data Interfaces
MAX1481 Software-Selectable, Half-/Full-Duplex, Slew-Rate-Limited, 12Mbps, RS-485/RS-422 Transceivers in Max Package
MAX1482 20 A, 1/8-Unit Load, Slew-rate Limited, RS-485 Transceivers
MAX1484 Software-Selectable, Half-/Full-Duplex, Slew-Rate-Limited, 12Mbps, RS-485/RS-422 Transceivers in Max Package
MAX1487 Low-Power, Slew-rate-limited RS-485/RS-422 Transceivers

MAX295EPA+ : 8th-Order, Lowpass, Switched-Capacitor Filters The MAX291/MAX292/MAX295/MAX296 are easy-to-use, 8th-order, lowpass, switched-capacitor filters that can be set up with corner frequencies from 0.1Hz to 25kHz (MAX291/MAX292) or 0.1Hz to 50kHz (MAX295/MAX296). The MAX291/MAX295 Butterworth filters p

AD3554BM : Wideband Fst-settling Operational Amplifier

MAX6887METE-T : Hex/Quad, Power-Supply Supervisory Circuits The MAX6887/MAX6888 multivoltage supply supervisors provide several voltage-detector inputs, one watchdog input, and three outputs. Each voltage-detector input offers a factory-set undervoltage and overvoltage threshold. Manual reset and margin disable in

MAX708ESA-T : Low-Cost, P Supervisory Circuits The MAX705MAX708/MAX813L microprocessor (P) supervisory circuits reduce the complexity and number of components required to monitor power-supply and battery functions in P systems. These devices significantly improve system reliability and accuracy compared to s

MAX509AEWP : Quad, Serial, 8-Bit DACs With Rail-to-Rail Outputs The MAX509/MAX510 are quad, serial-input, 8-bit voltage-output digital-to-analog converters (DACs). They operate with a single +5V supply or dual 5V supplies. Internal, precision buffers swing rail-to-rail. The reference input range includes both

MAX6860UK45D4+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC MPU SUPERVISOR SOT23-5 Specifications: Output: Open Drain or Open Collector ; Reset: Active Low ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 1.2 s Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 4.5V ; Operating Temperature: -40C

MAX6307EUK31D3+T : Pmic - Supervisor Integrated Circuit (ics) Multi-Voltage Supervisor Tape & Reel (TR) 2; IC SUPERVISOR 3.080V SOT23-5 Specifications: Output: Open Drain or Open Collector ; Reset: Active Low ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 2 ; Reset Timeout: 140 ms Minimum ; Type: Multi-Voltage Supervisor ; Voltage - Threshold: 3.08V, Adj ; Operating Temperature: -

MAX6462XR20+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC VOLT DETECTOR LP SC70-3 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High ; Package / Case: SC-70, SOT-323 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 14 s Typical Propagation Delay ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 2V ; Operating Temperatu

MAX6033AAUT25#TG16 : Ultra-high-precision SOT23 Series Voltage Reference

MAX8640ZEXT25+ : 1.4 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, DSO6 Specifications: Configuration / Function: Buck ; Package Type: Other, 1.50 X 1 MM, 0.80 MM HEIGHT, ROHS COMPLIANT, MO-252WAAD, MICRO, DFN-6 ; Life Cycle Stage: ACTIVE ; IOUT: 1.4 amps ; VIN: 3.6 volts ; fsw: 4000 kHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

MAX14671EWL+ : Supervisory Circuits Bidirectional OVPs w/ Adj OVLO Maxim MAX1467x Overvoltage Protectors provide protection to circuits against positive faults up to +28VDC. These devices feature a low 65m (typ) and WLP package on-resistance (RON) internal FETs to effectively minimize the voltage drop across the device. When the input voltage exceeds the overvol

 
0-C     D-L     M-R     S-Z