Details, datasheet, quote on part number: MAX146AMJP
CategoryData Conversion => ADC (Analog to Digital Converters)
Description+2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
CompanyMaxim Integrated Products
DatasheetDownload MAX146AMJP datasheet
Find where to buy


Features, Applications

o 8-Channel Single-Ended or 4-Channel Differential Inputs o Single-Supply Operation (MAX147) o Internal 2.5V Reference (MAX146) o Low Power (133ksps, 3V supply) (1ksps, 3V supply) 1A (power-down mode) SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface o Software-Configurable Unipolar or Bipolar Inputs o 20-Pin DIP/SSOP Packages

The MAX146/MAX147 12-bit data-acquisition systems combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. The MAX146 operates from a single to +3.6V supply; the MAX147 operates from a single to +5.25V supply. Both devices' analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation. The 4-wire serial interface connects directly to SPITM/ QSPITM and MICROWIRETM devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX146/MAX147 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The MAX146 has an internal 2.5V reference, while the MAX147 requires an external reference. Both parts have a reference-buffer amplifier with a 1.5% voltageadjustment range. These devices provide a hard-wired SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX146/MAX147, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60A at reduced sampling rates. The MAX146/MAX147 are available in 20-pin DIP and SSOP packages. For 4-channel versions of these devices, see the MAX1246/MAX1247 data sheet.


Ordering Information continued at end of data sheet. *Dice are specified +25C, DC parameters only.

Portable Data Logging Medical Instruments Pen Digitizers Data Acquisition Battery-Powered Instruments Process Control


SPI and QSPI are registered trademarks of Motorola, Inc. MICROWIRE is a registered trademark of National Semiconductor Corp. Maxim Integrated Products 1

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! 1-888-629-4642, or visit Maxim's website at

VDD to AGND, DGND................................................. to 6V AGND to DGND...................................................... 0.3V CH0CH7, COM to AGND, DGND............ -0.3V to (VDD + 0.3V) VREF, REFADJ to AGND........................... -0.3V to (VDD + 0.3V) Digital Inputs to DGND.............................................. to 6V Digital Outputs to DGND........................... -0.3V to (VDD + 0.3V) Digital Output Sink Current.................................................25mA Continuous Power Dissipation (TA = +70C) Plastic DIP (derate 11.11mW/C above +70C)......... 889mW SSOP (derate 8.00mW/C above +70C)................... 640mW CERDIP (derate 11.11mW/C above +70C).............. 889mW Operating Temperature Ranges to +125C Storage Temperature Range............................ to +150C Lead Temperature (soldering, 10s)................................ +300C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(VDD +3.6V (MAX146); VDD +5.25V (MAX147); COM = 0; fSCLK = 2.0MHz; external clock (50% duty cycle); 15 clocks/conversion cycle (133ksps); MAX146--4.7F capacitor at VREF pin; MAX147--external reference, VREF 2.500 V applied to VREF pin; TA = TMIN to TMAX; unless otherwise noted.) PARAMETER DC ACCURACY (Note 1) Resolution Relative Accuracy (Note 2) No Missing Codes Differential Nonlinearity Offset Error Gain Error (Note 3) Gain Temperature Coefficient Channel-to-Channel Offset Matching INL NMC DNL MAX14_B MAX147C Bits LSB ppm/C LSB Bits LSB SYMBOL CONDITIONS MIN TYP MAX UNITS

DYNAMIC SPECIFICATIONS (10kHz sine-wave input, 133ksps, 2.0MHz external clock, bipolar input mode) 70 73 Signal-to-Noise + Distortion Ratio SINAD MAX147C 73 Total Harmonic Distortion Spurious-Free Dynamic Range Channel-to-Channel Crosstalk Small-Signal Bandwidth Full-Power Bandwidth CONVERSION RATE Internal clock, SHDN = FLOAT Conversion Time (Note 5) tCONV Internal clock, SHDN = VDD External clock 2MHz, 12 clocks/conversion s THD SFDR Up to the 5th harmonic 65kHz, 2.500Vp-p (Note 4) -3dB rolloff MAX147C dB MHz

(VDD +3.6V (MAX146); VDD +5.25V (MAX147); COM = 0; fSCLK = 2.0MHz; external clock (50% duty cycle); 15 clocks/conversion cycle (133ksps); MAX146--4.7F capacitor at VREF pin; MAX147--external reference, VREF 2.500 V applied to VREF pin; TA = TMIN to TMAX; unless otherwise noted.) PARAMETER Track/Hold Acquisition Time Aperture Delay Aperture Jitter Internal Clock Frequency External Clock Frequency ANALOG/COM INPUTS Input Voltage Range, SingleEnded and Differential (Note 6) Multiplexer Leakage Current Input Capacitance INTERNAL REFERENCE (MAX146 only, reference buffer enabled) VREF Output Voltage = +25C VREF Short-Circuit Current MAX146_C VREF Temperature Coefficient Load Regulation (Note 7) Capacitive Bypass at VREF Capacitive Bypass at REFADJ Adjustment Range EXTERNAL REFERENCE AT VREF (Buffer disabled) VREF Input Voltage Range (Note 8) VREF Input Current VREF Input Resistance Shutdown VREF Input Current REFADJ Buffer Disable Threshold EXTERNAL REFERENCE AT REFADJ Capacitive Bypass at VREF Reference Buffer Gain REFADJ Input Current Internal compensation mode External compensation mode MAX147 F V/V A VDD 0.5 VREF = 2.5V VDD to 0.2mA output load Internal compensation mode External compensation mode Unipolar, COM = 0V Bipolar, COM = VREF / 2 On/off leakage current, VCH_ 0V or VDD F % ppm/C 0 to VREF V VREF V mA SHDN = FLOAT SHDN = VDD 0.1 Data transfer only 0 SYMBOL tACQ CONDITIONS MIN TYP MAX 1.5 UNITS ns ps MHz


Related products with the same datasheet
Some Part number from the same manufacture Maxim Integrated Products
MAX146BC +2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
MAX146EVKIT MAX146EVKIT, MAX147EVKIT Evaluation System/evaluation Kits For The MAX146/MAX147
MAX147 +2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
MAX1470 MAX1470 315MHz Low-Power, +3V Superheterodyne Receiver
MAX1470EVKIT MAX1470EVKIT Evaluation Kit For The MAX1470
MAX1471 315MHz/434MHz Low-Power, 3V/5V Ask/fsk Superheterodyne Receiver <<<>>><<<>>>The MAX1471 Low-power, CMOS, Superheterodyne, RF Dual-channel Receiver is Designed to Receive Both Amplitude- Shift-keyed (ASK)
MAX1472 MAX1472 300MHz-to-450MHz Low-Power, Crystal-based Ask Transmitter
MAX1472EVKIT MAX1472EVKIT Evaluation Kit For The MAX1472
MAX1473 MAX1473 315MHz/433MHz, Ask, Superheterodyne Receiver With Extended Dynamic Range
MAX1474 MAX1474 Miniature Electronically Trimmable Capacitor
MAX1478 1% Accurate, Digitally Trimmed, Rail-to-rail Sensor Signal Conditioner
MAX1479 300MHz to 450MHz Low-Power, Crystal-based +10dBm Ask/fsk Transmitter <<<>>>The MAX1479 Crystal-referenced Phase-locked-loop (PLL) VHF/uhf Transmitter is Designed to Transmit Ask, Ook, And FSK Data in The 300MHz
MAX147AC +2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs
MAX147EVKIT MAX146EVKIT, MAX147EVKIT Evaluation System/evaluation Kits For The MAX146/MAX147
MAX148 +2.7V to +5.25V Low-power 8-Channel Serial 10-Bit ADCs
MAX1480A Complete, ISOlated RS-485/RS-422 Data Interface
MAX1480E 15kV ESD-Protected, ISOlated RS-485/RS-422 Data Interfaces
MAX1481 Software-Selectable, Half-/Full-Duplex, Slew-Rate-Limited, 12Mbps, RS-485/RS-422 Transceivers in Max Package
MAX1482 20 A, 1/8-Unit Load, Slew-rate Limited, RS-485 Transceivers
MAX1484 Software-Selectable, Half-/Full-Duplex, Slew-Rate-Limited, 12Mbps, RS-485/RS-422 Transceivers in Max Package
MAX1487 Low-Power, Slew-rate-limited RS-485/RS-422 Transceivers

MAX1297BE : 265ksps, +3V, 6/2-Channel, 12-Bit ADCs With +2.5V Reference And Parallel Interface

MAX6316LUK34CW-T : Watchdog 5-Pin P Supervisory Circuits With Watchdog And Manual Reset

DS2741N+ : Current Monitor And Accumulator With Integrated Sense Resistor The DS2741 current monitor/accumulator is a complete current-sensing, measuring, and accumulation device tailored for cost-sensitive, battery-powered applications in a small 3mm x 3mm TDFN package. As a result, the DS2741 is a key compo

MAX6732UTLTD3 : Single-/Dual-/Triple-Voltage P Supervisory Circuits With Independent Watchdog Output The MAX6730MAX6735 single-/dual-/triple-voltage microprocessor (P) supervisors feature a watchdog timer and manual reset capability. The MAX6730MAX6735 offer factory-set reset thresholds for monitoring voltages

MAX6318MHUK35CY-T : 5-Pin P Supervisory Circuits With Watchdog And Manual Reset The MAX6316MAX6322 family of microprocessor (P) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68

MAX6480BL25AD1-T : 300mA LDO Linear Regulators With Internal Microprocessor Reset Circuit The MAX6469MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load c

MAX3224EEAP : 15kV ESD-Protected, 1A, 1Mbps, 3.0V To 5.5V, RS-232 Transceivers With AutoShutdown Plus The MAX3224E/MAX3225E/MAX3226E/MAX3227E/MAX3244E/MAX3245E are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown/wakeup features, high data-rate capabilities, and enhanced e

MAX6719AUTMRD6+T : Dual/Triple, Ultra-Low-Voltage, SOT23 P Supervisory Circuits The MAX6715AMAX6729A/MAX6797A are ultra-low-voltage microprocessor (??P) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its fac

MAX267BCWG+ : DUAL SWITCHED CAPACITOR FILTER, PIN PROGRAMMABLE, BANDPASS, PDIP24 Specifications: Filter Category: Active Filter ; Filter Type: Band Pass ; Filter Class: Switched Capacitor ; Supply Voltage (VS): 2.37 to 6.3 volts ; Fc: 4.00E-4 to 57 kHz ; Package Type: DIP, 0.300 INCH, PLASTIC, DIP-24 ; Number of Pins: 24 ; Number of Devices: 2 ; Applications: General

MAX6481BL31AD3-T : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, PBGA6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: Other, 3 X 3 MM, UCSP-6 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

0-C     D-L     M-R     S-Z