Details, datasheet, quote on part number: LSI8951U
CategoryInterface and Interconnect => SCSI => SCSI driver development
TitleSCSI driver development
DescriptionPci to Ultra2 Scsi Host Adapter User's Guide V2.1 11/00
CompanyLSI Logic Corporation
DatasheetDownload LSI8951U datasheet
Find where to buy


Features, Applications

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product. LSI Logic is not responsible for any radio or television interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by LSI Logic. The correction of interferences caused by such unauthorized modification, substitution, or attachment will be the responsibility of the user. The LSI Logic LSI8951U is tested to comply with FCC standards for home or office use.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

LSI Logic Corporation North American Headquarters Milpitas, CA 408.433.8000

This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB15-000109-01, Third Edition (November 2000). This document describes the LSI Logic LSI8951U PCI to Ultra2 SCSI Host Adapter and will remain the official reference source for all revisions/releases of this product until rescinded by an update. To receive product literature, visit us at LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties. Copyright 1998­2000 by LSI Logic Corporation. All rights reserved. TRADEMARK ACKNOWLEDGMENT The LSI Logic logo design, SDMS, LVD Link, and TolerANT are registered trademarks or trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies.


Some Part number from the same manufacture LSI Logic Corporation
LSIFC909 Fibre Channel I/o Processor Technical Manual V2.1 8/00
LSIFC919 Single Channel Fibre Channel I/o Processor Technical Manual V2.1 9/02
LSIFC919X Single Channel Fibre Channel I/o Processor Technical Manual V2.0 6/03
LSIFC929 Pci-x to Dual-channel Fibre Channel Solutions<<<>>>the LSIFC929X Controller Offers Industry-leading Performance at an Affordable Price. The LSIFC929X Controller Includes Three Embedded Arm Processors And Advanced
LSIFC929 Dual Channel Fibre Channel I/o Processor Technical Manual V2.0 8/01
LSIFC929X Dual Channel Fibre Channel I/o Processor Technical Manual V2.0 6/03
LSIFC929X Pci-x to Dual-channel Fibre Channel Solutions<<<>>>the LSIFC929X Controller Offers Industry-leading Performance at an Affordable Price. The LSIFC929X Controller Includes Three Embedded Arm Processors And Advanced
LSIU160 Pci to Single Channel Ultra 160 Scsi Host Adapter User's Guide V1.2 8/02
LSIU40HVD Pci to Dual Channel Scsi Host Adapter User's Guide V2.2 8/02
LSIU40SE Dual Channel Pci to Ultra Scsi Host Adapter User's Guide V2.2 8/02
LSIU80LVD Pci to Ultra2 Scsi Host Adapter User's Guide V2.2 8/02

CWDSP1640 : Oak DSP Core

LSI21040 : SCSI driver development Pci to Dual Channel Ultra 160 Scsi Host Adapter User's Guide V1.1 11/00

LSI53C1030 : Pci-x to Dual Channel Ultra320 Scsi Multifunction Controller Technical Manual V2.1 6/03

LSI53C825A : SCSI integrated circuits Pci to Ultra Scsi I/o Processor Technical Manual V3.1 1/01

LSIU160 : SCSI driver development Pci to Single Channel Ultra 160 Scsi Host Adapter User's Guide V1.2 8/02

NCR92C391 :

NQ80220 : 100base-tx/10base-t Ethernet Media Interface Adapter

NQ84C300A : Fast Ethernet 4-port Fast Ethernet Controller

Q83C95 :

QQ84C30A : 10 MBPS Controller (MAC) Manual 12/96

: Details The Architecture, Control Registers, Pipeline Control Unit, Instruction, Data And Execution Units And Instruction Set.

Same catergory

AN2720SC-01 : USB Full-Speed Peripherals. Ez-usb Full-speed Peripheral. Smallest completely integrated solution in the market 32 pin TQFP Only requires a single crystal and small 16 byte serial EEPROM for full implementation Meets difficult suspend current 500 uA for both hosts 2K data buffer for maximum speed transfer Greater than 5 Mbps data transfer rate Low power ­ Less than 100 mW power The Cypress AN2720SC provides.

ARX4417-LPFP : Arx 4418 & 4417 Variable Amplitude Transceivers For MacaIR A3818, A5690, A5232, A4905 & Mil-std-1553.

BR24E16FJ : I2c Bus Compatible Serial EePROM. The BR24C08, BR24C16 and BR24E16 series are 2-wire (I2C BUS type) serial EEPROMs which are electrically programmable. z x 8 bits serial EEPROM. FJ / FV) x 8 bits serial EEPROM. FJ / FV, FJ / FV) 2) Two wire serial interface. (2Byte Address BR24E16) 3) Operating voltage range 2.7V5.5V 4) Low current consumption Active (at : 2.0mA (Typ.) Standby (at : 1.0µA.

DS2125 : DS2125 Ultra3 Lvd/se 15-Line Scsi Terminator. The DS2125 Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-ended (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end user SE backward compatibility with legacy devices. If the device is connected in an LVD-only bus, the DS2125 uses LVD termination.

LB1855NM : 3-phase Brushless Motor Driver. The a 3-phase brushless motor driver IC that is optimal for VCR drum motor drive. Current limiter circuit built in AGC circuit built in Thermal shutdown circuit built in Current linear drive No output electrolytic capacitors required. On the specified printed circuit board mm glass3 epoxy board) s Parameter Maximum supply voltage Maximum output current.

LB1882V : 3-phase Brushless Motor Driver. The is a three-phase brushless motor driver IC that is particularly well-suited for driving spindle motors in portable AV equipment such as DAT, CD and MD products. Current linear drive: allows external capacitances to be minimized. Motor voltage control: reduces power dissipation. Support for motor drive at power supply voltages as low 1.8 V Built-in.

LT1237 : LT1237, 5V RS232 Transceiver With Advanced Power Management And One Receiver Active in Shutdown.

MAX3355E : MAX3355E ±15kV Esd-protected Usb On-the-go Charge Pump And Comparators in Ucsp.

NJU6463 : 16-charactor 3-line Dot Matrix LCD Controller Driver.

SN75LBC970ADL : ti SN75LBC970A, Differential Converter-control. Provides Differential SCSI from SingleEnded Controller When Used With the SN75LBC971A Data Transceiver Designed to Operate at Fast-SCSI Speeds of 10 Million Data Transfers per Second Nine Transceivers Meet or Exceed the Requirements of ANSI Standard EIA-485 and ISO-8482 Standards Packaged in Shrink Small-Outline Package with 25 mil Terminal Pitch Low Disabled.

TSB41LV04APFP : Physical Layer Controllers. ti TSB41LV04A, Ieee 1394a Four-port Cable Transceiver/arbiter.

UCC5606DP : SCSI Bus Termination. ti UCC5606, Lowest Capacitance 9-Line 3-5V se Terminator For Scsi Through Ultra Scsi With Reverse Disconnect.

W83626D : Bridge. = Lpc-to-isa Bridge ;; Package = QFP 128. is a transparent LPC-to-ISA bus conversion IC. For the new generation Intel chipset Camino and Whitney, SiS Super South 960, featuring LPC bus, there is no support for ISA bus and slots. However the demand of ISA devices still exist. For such case, W83626F is the best companion solution for the non-ISA chipset. Also the packages of W83626F had been.

SN75DP12 : DisplayPort To TMDS Translator The SN75DP129 is a Dual-Mode DisplayPort input to Transition-Minimized Differential Signaling (TMDS) output. The TMDS output has a built-in level translator, compliant with Digital Visual Interface 1.0 (DVI) and High Definition Multimedia Interface 1.3 (HDMI) standards. The SN75DP129 is specified up to a maximum data rate.

0-C     D-L     M-R     S-Z