Details, datasheet, quote on part number: LSI53C860E
PartLSI53C860E
CategoryInterface and Interconnect => SCSI
Description
CompanyLSI Logic Corporation
DatasheetDownload LSI53C860E datasheet
Quote
Find where to buy
 
  

 

Features, Applications
LSI53C860E SCSI CONTROLLER

The Communications CompanyTM

P C I - U LT R A S C S I C O N T R O L L E R

BENEFITS

Ultra SCSI technology doubles the I/O bandwidth to 20 MBps Builds upon proven technology -- A pin-for-pin replacement for the industry standard LSI53C810 and LSI53C810AE Easy migration minimizes schedule and design risk

OVERVIEW

The LSI53C860E controller supports Ultra SCSI transfers, enabling the chip to transfer SCSI data at up to 20 MBps across an 8-bit SCSI bus. Ultra SCSI doubles the synchronous transfer rates of Fast SCSI. The advantage of LSI Logic's Ultra SCSI is that it significantly improves SCSI bandwidth, while preser ving existing hardware and software investments. The LSI53C860E provides full SCSI-2 capabilities, including command queuing, and features TolerANT SCSI driver and receiver technology, for reliable operation in all cabling environments. It is designed to connect to the Peripheral Component Interconnect (PCI) bus, performing burst transfers on the bus in excess of 110 MBps.

Provides new features for enhanced PCI performance and flexibility

FEATURES

Per forms high-speed singleended SCSI bus transfers up to: 20 MBps synchronous Ultra SCSI transfers 7 MBps asynchronous transfers SCRIPTSTM Instruction Prefetch Load and Store instruction Suppor t for PCI Cache Line Size Register Functions as full 32-bit PCI DMA bus master Bursts 2, 4, 8, or 16 dwords of data across PCI bus using 80-byte DMA FIFO

The LSI53C860E controller and Storage Device Management System (SDMSTM) software, provide a total Ultra SCSI solution in PC and workstation environments. LSI Logic's SDMS software package supports the entire LSI53C8XX family of PCI to SCSI controllers, plus a wide range of SCSI peripheral devices. PCI performance enhancements on the LSI53C860E include the SCRIPTS (the LSI Logic developed SCSI programming language) instruction prefetch, which when enabled, permits fetching four or eight double words of instructions or instruction operands. By pre-fetching instructions, the LSI53C860E makes more efficient use of the PCI system bus by reducing the PCI bus overhead requirements. In addition, the part supports the PCI Cache Line Size Register with programmable alignment logic and automatic burst sizing, allowing system architects to maximize their cache-based system performance

LSI53C860E SCSI Controller

through efficient use of PCI Memory Read Line, Memory Read Multiple, and Memor y Write and Invalidate access cycles. Other selectable features that can be activated include: IRQ disable, allowing users to better control the times when their system can receive interrupts. SCSI Selected as ID register, improving SCRIPTS coding and system tracking. Load and Store instruction allows the programmer a new, efficient instruction option to load data directly to/from memory and from/to an internal register, reducing the number of I/O instructions to implement a SCRIPTS task.

EASE-OF-USE FEATURES

Pin-for-pin replacement for LSI53C810 and LSI53C810AE devices Minimal software and hardware modification required for Ultra SCSI Compact 100-pin PQFP reduces board space requirements Direct PCI to SCSI connection Compiler-compatible with existing LSI53C7XX and LSI53C8XX SCRIPTS Fully supported by SDMS software for complete PC-based operating system support

FLEXIBILITY FEATURES

Selectable IRQ disable SCSI Selected as ID register Suppor t for both 3.3 volt and 5 volt PCI interfaces High-level programming interface (SCSI SCRIPTS) Allows tailored SCSI sequences to be executed from main memory Accommodates changes in the logical I/O interface definition Low-level access to all registers and all SCSI bus signals

COMPATIBILITY FEATURES

Full complement of LSI Logic SCSI SCRIPTS PCI development tools available BIOS and driver support for hard disk, tape, CD-ROM, and removable media peripherals for all of the major operating systems, including: Windows NT 4.0 Windows 95/98 DOS Linux

NetWare SCO UnixWareTM OS/2 Warp Solaris

SCSI Connection

Some Part number from the same manufacture LSI Logic Corporation
LSI53C875 Pci to Ultra Scsi I/o Processor Technical Manual V4.2 4/03
LSI53C875A Pci to Ultra Scsi Controller Technical Manual V2.0 12/00
LSI53C875E Pci to Ultra Scsi I/o Processor Technical Manual V4.2 4/03
LSI53C876 Pci to Dual Channel Scsi Multifunction Controller Technical Manual V2.1 3/01
LSI53C895 Pci to Ultra2 Scsi I/o Processor With LVD Link Universal Transceivers Technical Manual V3.2 12/00
LSI53C895A Pci to Ultra2 Scsi Controller Technical Manual V2.2 4/01
LSI53C896 Pci to Dual Channel Ultra2 Scsi Multifunction Controller Technical Manual V3.2 4/01
LSI53CF92A Fast Scsi Controller Technical Manual V2.1 4/02
LSI60800 Pci to Usb Host Adapter User's Guide V1.1 11/00
LSI7202CP Compactpci Dual Channel 2 Gbit/s Fibre Channel Host Adapter User's Guide V1.0 2/02
LSI8750SP Pci to Ultra Scsi Host Adapter User's Guide V2.1 11/00
LSI8751D Pci to Scsi Host Adapter User's Guide V3.0 8/01
LSI8751SP Pci to Ultra Scsi Host Adapter User's Guide V2.1 11/00
LSI8751SPE Pci to Ultra Scsi Host Adapter User's Guide V1.1 11/00
LSI8951U Pci to Ultra2 Scsi Host Adapter User's Guide V2.1 11/00
LSIFC909 Fibre Channel I/o Processor Technical Manual V2.1 8/00
LSIFC919 Single Channel Fibre Channel I/o Processor Technical Manual V2.1 9/02
LSIFC919X Single Channel Fibre Channel I/o Processor Technical Manual V2.0 6/03
LSIFC929 Pci-x to Dual-channel Fibre Channel Solutions<<<>>>the LSIFC929X Controller Offers Industry-leading Performance at an Affordable Price. The LSIFC929X Controller Includes Three Embedded Arm Processors And Advanced
LSIFC929 Dual Channel Fibre Channel I/o Processor Technical Manual V2.0 8/01
LSIFC929X Dual Channel Fibre Channel I/o Processor Technical Manual V2.0 6/03

80225 : 10/100mbps Tx/10bt Ethernet Physical Layer Device (phy)

CW901101 : FPGA/PLD Soft Core 10-bit Pipelined ADC Core

L64118 :

L64211-20 :

L79301 : L79301 Streamslicetm Configurable 10 Gbit/s Platform Advance Datasheet 4/03

LSI53C040 : SCSI bus expanders and enclosure Enclosure Services Processor Programming Guide V1.1 12/00

NQ84C300A : Fast Ethernet 4-port Fast Ethernet Controller

USBHOSTCORE : FPGA/PLD Soft Core Host Core For Universal Serial Bus Solutions

Same catergory

485LP9R : Port Powered Rs-232 to Rs-485 Converter. The is a port-powered two-channel to RS-485 converter. It converts TD and RD RS-232 lines to balanced RS-485 signals. The unit can be powered from the RS-232 handshake lines, DTR and RTS. One of these handshakes must be high (asserted) to power the unit (See Table 1). DTR must be asserted to receive data. The RS-485 driver is enabled when RTS is asserted.

AICR-33C95A : Controller. Enhanced Wide Scsi Bus Controllers. Providing outstanding performance and flexibility for servers and high-end workstations, the dualchannel AIC-7899 single-chip host adapter meets tomorrow's requirements today. It delivers Ultra160/m SCSI data rates to 160 MByte/sec on each channel to address emerging bandwidthhungry applications, such as real-time video, data mining, Internet/Intranet,.

CLC011 : Serial Digital Interface. CLC011 - Serial Digital Video Decoder, Package: Plcc, Pin Nb=28.

LTC1695 : SMBus/I2C. LTC1695, SMBus/I2C Fan Speed Controller in SOT-23. Complete SMBus/I2CTM Brushless DC Fan Speed Control System 5-Pin SOT-23 package 0.75 PMOS Linear Regulator with 180mA Output Current Rating to 4.922V Output Voltage Range Controlled a 6-Bit DAC Simple 2-Wire SMBus/I2C Interface 250ms Internal Timer Ensures Fan Start-Up Current Limit and Thermal Shutdown Fault Status Indication via SMBus Host Readback.

MLX90314 : High Gain Programmable Sensor Interface. Microprocessor-controlled signal conditioning for bridge-type sensors Suited for low-cost sensors: reduction of non-linearity by programmable coefficients External or internal temperature sensor for compensating temperature errors Versatile output signal ranges: 20 mA loop Mass calibration easy with or 9600 baud UART Power supply from to 35VDC Applications.

SLX24C01 : 1/2 Kbit 128/256 X 8 Bit Serial CMOS EePROMs, I2c Synchronous 2-wire Bus.

SN55183 : Dual Differential Line Driver. Single 5-V Supply Differential Line Operation Dual Channels T TL Compatibility Short-Circuit Protection of Outputs Output Clamp Diodes to Terminate Line Transients High-Current Outputs Quad Inputs Single-Ended or Differential AND/NAND Outputs Designed for Use With Dual Differential Drivers SN55182 and SN75182 Designed to Be Interchangeable With National.

SN75C091AFN : ti SN75C091A, Bus Controller. The SN75C091A provides the capability to interface a microprocessor subsystem to the ANSI Small Computer Systems Interface (SCSI). This single-ended SCSI implementation acts as one up to eight nodes communicating over a maximum six-meter bus as detailed in the SCSI (ANSI X3.131-1986). Its microprocessor and DMA interfaces allow the SN75C091A SCSI Bus Controller.

SN75LVDS387DGG : ti SN75LVDS387, 16-Channel LVDS Transmitter. Four ('391), Eight ('389) or Sixteen ('387) Line Drivers Meet or Exceed the Requirements of ANSI EIA / TIA-644 Standard Designed for Signaling Rates to 630 Mbps With Very Low Radiation (EMI) Low-Voltage Differential Signaling With Typical Output Voltage 350 mV and a 100- Load Propagation Delay Times Less Than 2.9 ns Output Skew Is Less Than 150 ps Part-to-Part.

ST24EB1TR : 16 Kbit Serial I2c EePROM With Extended Addressing. 16 Kbit Serial I2C EEPROM with Extended Addressing COMPATIBLE with I2C EXTENDED ADDRESSING TWO WIRE SERIAL INTERFACE, SUPPORTS 400kHz PROTOCOL 1 MILLION ERASE/WRITE CYCLES, OVER the FULL SUPPLY VOLTAGE RANGE 40 YEARS DATA RETENTION SINGLE SUPPLY VOLTAGE to 5.5V for ST24E16 version to 5.5V for ST25E16 version WRITE CONTROL FEATURE BYTE and PAGE WRITE.

UA9639CD : ti UA9639, Dual Differential Line Receiver. Operates From Single 5-V Power Supply Wide Common-Mode Voltage Range High Input Impedance TTL-Compatible Outputs High-Speed Schottky Circuitry 8-Pin Dual-In-Line Packages Designed to Be Interchangeable With National DS9639AC The is a dual differential line receiver designed to meet ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations.

UC5601DWP : SCSI Bus Termination. ti UC5601, 18-Line 5V se Terminator For Scsi And Fast Scsi.

TPIC1021 : LIN Physical Interface The TPIC1021 is the LIN (Local Interconnect Network) physical interface, which integrates the serial transceiver with wake up and protection . The LIN bus is a single wire, bi-directional bus typically used for low-speed in-vehicle networks using baud rates between 2.4 kbps and 20 kbps. The LIN bus has two logical values: the dominant.

ISL3259E : ±15kV ESD Protected, 100Mbps, 5V, PROFIBUS??, Full Fail-safe, RS-485/RS-422 Transceivers Intersil’s ISL3259E is a ±15kV IEC61000 ESD Protected, 5V powered, single transceiver that meets both the RS-485 and RS-422 standards for balanced communication. It also the larger output voltage and higher data rate (up to 100Mbps) required by high speed PROFIBUS.

TMP821 : Two-Phase Half-Wave Motor Predriver * Built-In Lock Detection and Rotational Speed Sensing Mechanisms * Compact 8-Pin Package Reduces Number of External Components Required * Automatic Restart When Motor Lock Is Undone * Hall Amplifier Inputs Have Hysteresis.

XR21V1414 : 4-Ch Full-Speed USB UART The XR21V1414 is an enhanced 4-channel Universal Asynchronous Receiver and Transmitter (UART) with a USB interface. The USB interface is fully compliant to Full Speed USB 2.0 that supports 12 Mbps USB data transfer rate. The USB interface also supports USB suspend, resume and remote wakeup operations..

ADM3051 : High Speed Industrial CAN Transceiver With Bus Protection For 24 V Systems The ADM3051 is a controller area network (CAN) physical layer transceiver allowing a protocol layer CAN controller to access the physical layer bus. The ADM3051 complies with the ISO 11898 standard. It is capable of running at data rates up to 1 Mbps..

 
0-C     D-L     M-R     S-Z