|Category||Interface and Interconnect => SCSI => SCSI integrated circuits|
|Title||SCSI integrated circuits|
|Description||Pci to Scsi I/o Processor Technical Manual V2.1 3/01|
|Company||LSI Logic Corporation|
|Datasheet||Download LSI53C810A datasheet
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB14-000168-00, First Edition (March 2001) This document describes the LSI Logic LSI53C810A PCI to SCSI I/O Processor and will remain the official reference source for all revisions/releases of this product until rescinded by an update. To receive product literature, visit us at http://www.lsilogic.com. LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties. Copyright 19952001 by LSI Logic Corporation. All rights reserved. TRADEMARK ACKNOWLEDGMENT The LSI Logic logo design, TolerANT, SDMS, and SCRIPTS are registered trademarks or trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies.
This book is the primary reference and technical manual for the LSI Logic LSI53C810A PCI to SCSI I/O Processor. It contains a complete functional description for the product and includes complete physical and electrical specifications.
Audience This manual provides reference information on the LSI53C810A PCI to SCSI I/O processor. It is intended for system designers and programmers who are using this device to design a SCSI port for PCI-based personal computers, workstations, or embedded applications.Organization This document has the following chapters and appendix:
Chapter 1, General Description, includes general information about the LSI53C810A and other members of the LSI53C8XX family of PCI to SCSI I/O processors. Chapter 2, Functional Description, describes the main functional areas of the chip in more detail, including the interfaces to the SCSI bus. Chapter 3, PCI Functional Description, describes the chip's connection to the PCI bus, including the PCI commands and configuration registers supported. Chapter 4, Signal Descriptions, contains the pin diagrams and definitions of each signal. Chapter 5, Operating Registers, describes each bit in the operating registers, organized by address.
|Some Part number from the same manufacture LSI Logic Corporation|
|LSI53C825A Pci to Ultra Scsi I/o Processor Technical Manual V3.1 1/01|
|LSI53C860 Pci to Ultra Scsi I/o Processor Technical Manual V2.1 4/01|
|LSI53C875 Pci to Ultra Scsi I/o Processor Technical Manual V4.2 4/03|
|LSI53C875A Pci to Ultra Scsi Controller Technical Manual V2.0 12/00|
|LSI53C875E Pci to Ultra Scsi I/o Processor Technical Manual V4.2 4/03|
|LSI53C876 Pci to Dual Channel Scsi Multifunction Controller Technical Manual V2.1 3/01|
|LSI53C895 Pci to Ultra2 Scsi I/o Processor With LVD Link Universal Transceivers Technical Manual V3.2 12/00|
|LSI53C895A Pci to Ultra2 Scsi Controller Technical Manual V2.2 4/01|
|LSI53C896 Pci to Dual Channel Ultra2 Scsi Multifunction Controller Technical Manual V3.2 4/01|
|LSI53CF92A Fast Scsi Controller Technical Manual V2.1 4/02|
|LSI60800 Pci to Usb Host Adapter User's Guide V1.1 11/00|
|LSI7202CP Compactpci Dual Channel 2 Gbit/s Fibre Channel Host Adapter User's Guide V1.0 2/02|
|LSI8750SP Pci to Ultra Scsi Host Adapter User's Guide V2.1 11/00|
|LSI8751D Pci to Scsi Host Adapter User's Guide V3.0 8/01|
|LSI8751SP Pci to Ultra Scsi Host Adapter User's Guide V2.1 11/00|
|LSI8751SPE Pci to Ultra Scsi Host Adapter User's Guide V1.1 11/00|
|LSI8951U Pci to Ultra2 Scsi Host Adapter User's Guide V2.1 11/00|
|LSIFC909 Fibre Channel I/o Processor Technical Manual V2.1 8/00|
|LSIFC919 Single Channel Fibre Channel I/o Processor Technical Manual V2.1 9/02|
BDMR4103 : MIPS BDMR4103 Evaluation Board User's Guide 7/00
CW001105 : ARM966E-S Microprocessor Core Preliminary Datasheet 10/01
DQ8020 : MCC Manchester Code Converter Manual
LSI401Z : Digital Signal Processor
LSI53C040 : SCSI bus expanders and enclosure Enclosure Services Processor Programming Guide V1.1 12/00
PQ80C200 : Full Duplex CMOS Ethernet 10/100 Mbits/s Data Link Controller Manual
DMN-8102 : A/V codec The DMN-8102 codec is a true multi-format A/V codec that enables unique features for PC peripheral and TV PVR applications. These include, but are not limited to, digital restoration of old analog tapes, fast dubbing of digital videotapes, MPEG-1, MPEG-2, and DV codec functionality. I
70V05 : Multi-Ports. 8K X 8 3.3v Dual-port RAM. True Dual-Ported memory cells which allow simultaneous reads of the same memory location High-speed access Commercial: 15/20/25/35/55ns (max.) Industrial: 20/25/35/55ns (max.) Low-power operation IDT70V05S Active: 400mW (typ.) Standby: 3.3mW (typ.) IDT70V05L Active: 380mW (typ.) Standby: 660µW (typ.) IDT70V05 easily expands data bus width to 16 bits.
70V08 : Multi-Ports. 64K X 8 3.3V Dual-port RAM. True Dual-Ported memory cells which allow simultaneous access of the same memory location High-speed access Commercial: 15/20/25/35ns (max.) Low-power operation IDT70V08S Active: 550mW (typ.) Standby: 5mW (typ.) IDT70V08L Active: 550mW (typ.) Standby: 1mW (typ.) Dual chip enables allow for depth expansion without external logic IDT70V08 easily.
74F545SJ : Octal Bidirectional Transceiver With Tri-statee Outputs. 54F 74F545 Octal Bidirectional Transceiver with TRI-STATE Outputs The an 8-bit TRI-STATE high-speed transceiver It provides bidirectional drive for bus-oriented microprocessor and digital communications systems Straight through bidirectional transceivers are featured with (20 mA Mil) bus drive capability on the A ports and (48 mA Mil) bus drive capability.
AD9805 : Complete 10-Bit, 6 MSPS Ccd/cis Signal Processor. Pin Compatible 12-Bit and 10-Bit Versions 12-Bit/10-Bit 6 MSPS A/D Converter Integrated Triple Correlated Double Sampler 3-Channel, 2 MSPS Color Mode 4 Analog Programmable Gain Amplifier Pixel-Rate Digital Gain Adjustment Pixel-Rate Digital Offset Adjustment Internal Voltage Reference No Missing Codes Guaranteed Microprocessor-Compatible Control Interface.
CT2561 : Ct2561 Bus Controller, Remote Terminal And Bus Monitor For Mil-std-1553b.
IDT88P8344 : Spi Exchange 4 X SPI-3 to SPI-4The IDT88P8344 is a Spi (System Packet Interface) Exchange With Four SPI-3 Interfaces And One SPI-4 Interface. The Data That Enter on The Low Speedinterface (SPI-3) Are Mapped to Logical Identifiers (LIDs) And Enqueued Fortransmission Over The High Speed Interface (SPI-4). The Data That Enter on Thehigh Speed Interface.
LB1882V : 3-phase Brushless Motor Driver. The is a three-phase brushless motor driver IC that is particularly well-suited for driving spindle motors in portable AV equipment such as DAT, CD and MD products. Current linear drive: allows external capacitances to be minimized. Motor voltage control: reduces power dissipation. Support for motor drive at power supply voltages as low 1.8 V Built-in.
LB1916 : Cd-rom Spindle Motor Driver. The a 3-phase motor driver that is optimal for driving CD-ROM spindle motors. 3-phase brushless motor driver 120° voltage linear drive control V-type input used for the control voltage Control gain switching supported Pins for system control and control of acceleration and deceleration provided. Start/stop pin provided. Hall bias circuit s Parameter.
LB8632V : Low-voltage/low-saturation Camera Motor Driver. The is a general-purpose camera motor driver IC that supports low-saturation output and low-voltage drive and thus can be used in a wide range of applications. The is a miniature thin form-factor IC that provides circuit structures and I/O logic that reduce development times and costs and support reduced lot sizes and end product diversity, despite.
M54676P : 2-phase Stepper Motor Driver. The is a semiconductor IC to drive a bipolar stepper motor by the micro step method by changing the coil current of the motor continuously. OutA Out SG A Sense A GND Vref A Phase A Phase VM 19 OutB 18 Out B 16 GND 15 GND 14 Sense B 13 VrefB 12 PhaseB 11 Phase B q Highly-accurate micro step drive by chopping sink output transistor and source output transistor.
MA31753 : Dma Controller (dmac) For And Ma31750 System. The MA31753 Direct Memory Access Controller (DMAC) is a peripheral interface circuit design primarily for use with the MA31750 microprocessor. Each DMAC provides up to four independant, prioritised channels each of which can perform DMA transfers between memory and/or I/O devices using the MA31750 bus. Each channel has its own programmable internal.
MC3479 : Stepper Motor Driver. The MC3479 is designed to drive a twophase stepper motor in the bipolar mode. The circuit consists of four input sections, a logic decoding/sequencing section, two driverstages for the motor coils, and an output to indicate the Phase A drive state. Single Supply Operation: V 350 mA/Coil Drive Capability Clamp Diodes Provided for BackEMF Suppression.
SN65LVDT41PW : ti SN65LVDT41, MemoryStick(TM) Interconnect Extender Chipset. MEMORY STICK INTERCONNECT EXTENDER CHIPSET WITH LVDS SN65LVDT14--ONE DRIVER PLUS FOUR RECEIVERS SN65LVDT41--FOUR DRIVERS PLUS ONE RECEIVER Termination Resistor Operates From a Single 3.3-V Supply Greater Than 125 Mbps Data Rate Flow-Through Pin-Out LVTTL Compatible Logic I/Os ESD Protection On Bus Pins Exceeds 16 kV Meets or Exceeds the Requirements.
SP3223H : Transceivers. No. Of TX = 2 ;; No. Of RX = 2 ;; Data Rate (kbps) = 460 ;; Supply Voltage (V) = 3.0 - 5.5 ;; Typ. Icc Current (mA) = 0.3 ;; Int. Chrg. Pump = • ;; No. Of Ext. Caps = 4 ;; Nom Cap. Value (µF) = 0.10 ;; = ;; = • ;; = • ;; = › RS232 Compatible Down to Vcc=2.7V › Auto-online › Wakeup ;; Package = 20 Pin Pdip.
SP5055 : 2.6ghz Bidirectional I2c Bus Controlled Synthesiser. The is a single chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device contains 4 addressable current limited outputs and 4 addressable Bi-Directional open collector ports one of which a 3 bit ADC. The information on these ports can be read via the I2C BUS. The device has one fixed.
W83977EG : W83877TF plus KBC, GP I/O, Wake-Up, Power Fail Resume, Pb-free.