|Category||Interface and Interconnect => SCSI|
|Description||Pci to Dual Channel Ultra160 Scsi Multifunction Controller Technical Manual V2.1 5/01|
|Company||LSI Logic Corporation|
|Datasheet||Download LSI53C1010R datasheet
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB14-000153-03, Third Edition (Mary 2001) This document describes the LSI Logic LSI53C1010R PCI to Dual Channel Ultra160 SCSI Multifunction Controller and will remain the official reference source for all revisions/releases of this product until rescinded by an update. To receive product literature, visit us at http://www.lsilogic.com. LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties. Ultra/Ultra2/Ultra3/Ultra160 SCSI are terms used by the SCSI Trade Association (STA) to describe various SCSI specifications. Refer to the subsection entitled "Related Publications," for additional information on SCSI specifications. Copyright 20002001 by LSI Logic Corporation. All rights reserved. TRADEMARK ACKNOWLEDGMENT The LSI Logic logo design, TolerANT, SCRIPTS, SDMS, SURElink, and LVD Link are registered trademarks or trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies.
This book is the primary reference and technical manual for the LSI Logic LSI53C1010R PCI to Dual Channel Ultra160 SCSI Multifunction Controller. It contains a complete functional description for the product and includes complete physical and electrical specifications.
Audience This document was prepared for system designers and programmers who are using this device to design an Ultra160 SCSI port for PCI-based personal computers, workstations, servers or embedded applications.Organization This document has the following chapters and appendixes:
Chapter 1, Introduction, describes the general information about the LSI53C1010R. Chapter 2, Functional Description, describes the main functional areas of the chip in greater detail, including the interfaces to the SCSI bus and external memory. Chapter 3, Signal Descriptions, contains the pin diagram and signal descriptions. Chapter 4, Registers, describes each bit in the operating registers, and is organized by register address. Chapter 5, SCSI SCRIPTS Instruction Set, defines all of the SCSI SCRIPTS instructions that are supported by the LSI53C1010R. Chapter 6, Specifications, contains the electrical characteristics and AC timing diagrams. Appendix A, Register Summary, is a register summary.
|Some Part number from the same manufacture LSI Logic Corporation|
|LSI53C1020 Pci-x to Ultra320 Scsi Controller Technical Manual V2.1 6/03|
|LSI53C1030 Pci-x to Dual Channel Ultra320 Scsi Multifunction Controller Technical Manual V2.1 6/03|
|LSI53C120 Ultra Scsi Bus Expander Technical Manual V1.0 8/01|
|LSI53C140 Ultra2 Scsi Bus Expander Technical Manual V2.1 9/01|
|LSI53C141 Scsi Bus Expander Technical Manual V2.1 11/00|
|LSI53C1510 I2O-Ready Pci Raid Ultra2 Scsi Controller Technical Manual V2.2 4/01|
|LSI53C180 Ultra160 Scsi Bus Expander Technical Manual V1.3 6/01|
|LSI53C320 Ultra320 Scsi Bus Expander Technical Manual V2.1 5/03|
|LSI53C770 Ultra Scsi I/o Processor Technical Manual V2.1 3/01|
|LSI53C810A Pci to Scsi I/o Processor Technical Manual V2.1 3/01|
|LSI53C825A Pci to Ultra Scsi I/o Processor Technical Manual V3.1 1/01|
|LSI53C860 Pci to Ultra Scsi I/o Processor Technical Manual V2.1 4/01|
|LSI53C875 Pci to Ultra Scsi I/o Processor Technical Manual V4.2 4/03|
|LSI53C875A Pci to Ultra Scsi Controller Technical Manual V2.0 12/00|
|LSI53C875E Pci to Ultra Scsi I/o Processor Technical Manual V4.2 4/03|
|LSI53C876 Pci to Dual Channel Scsi Multifunction Controller Technical Manual V2.1 3/01|
|LSI53C895 Pci to Ultra2 Scsi I/o Processor With LVD Link Universal Transceivers Technical Manual V3.2 12/00|
|LSI53C895A Pci to Ultra2 Scsi Controller Technical Manual V2.2 4/01|
|LSI53C896 Pci to Dual Channel Ultra2 Scsi Multifunction Controller Technical Manual V3.2 4/01|
84302 : Quad 100/10mbps Ethernet Controller With Rmon/snmp Management Counters
BD4F5FS601S33 : Bd4f5fs601s33 4 MA, 60 Mhz, 5-Volt Tolerant, Fail-safe I/o Buffer Datasheet 2/01
NQ8101 : Gigabit Ethernet Controller
NQ84C24 : Quad 10base-t Ethernet Media Interface Adapter
RC11XT440 : RapidChip Xtreme Platform ASIC
422LPCOR : Two Channel. This to RS-422 converter converts unbalanced RS-232 signals to balanced RS-422 signals. The power used for this converter is derived from the transmit data line (pin 2) and the handshake control lines (pins and 20). The converter can derive power from these lines when they are in the positive or negative voltage state. This permits the converter to be used.
422PP9TB : Two Channel. The is a port-powered two-channel to RS-422 converter. It converts TD and RD RS-232 lines to balanced RS-422 signals. The unit can be powered from the RS-232 handshake lines, DTR and RTS. If port-powering the unit, at least one of these handshake lines must be present, but can be in any state. The 422PP9TB can also be powered externally on the terminal.
74ALVC162835 : Low Voltage 18-Bit Universal Bus Driver With 3.6V Tolerant Inputs/outputs And 26 Ohm Series Resistors in Outputs.
AM26S10 : Quadruple Bus Transceivers. Schottky Circuitry for High Speed, Typical Propagation Delay Time. 12 ns Drivers Feature Open-Collector Outputs for Party-Line (Data Bus) Operation Driver Outputs Can Sink 0.8 V Maximum pnp Inputs for Minimal Input Loading Designed to Be Interchangeable With Advanced Micro Devices AM26S10 The is a quadruple bus transceiver utilizing Schottky-diode-clamped.
L293 : Quad Half-bridge Driver. Featuring Unitrode L293 and L293D Products Now From Texas Instruments Wide Supply-Voltage Range: 36 V Separate Input-Logic Supply Internal ESD Protection Thermal Shutdown High-Noise-Immunity Inputs Functional Replacements for SGS L293 and SGS L293D Output Current 1 A Per Channel (600 mA for L293D) Peak Output Current 2 A Per Channel (1.2 A for L293D).
LB1987H : . Three-Phase Brushless Motor Driver for VCR Capstan Motors Three-phase full-wave current-linear drive Torque ripple correction circuit (fixed correction ratio) Current limiter circuit with control characteristics gain switching Oversaturation prevention circuits for both the upper and lower sides of the output stage (No external capacitors are required.).
LTC1643L-1 : Pci-bus Hot Swap Controller. Allows Safe Board Insertion and Removal from a Live PCI Slot Works on either a Motherboard (LTC1643H) or CompactPCITM Card (LTC1643L/LTC1643L-1) Controls 5V, 12V Supplies Programmable Foldback Current Limit with Circuit Breaker User-Programmable Supply Voltage Power-Up Rate High Side Drive for External N-Channel MOSFETs 12V and 12V On-Chip Switches.
SN54LVT8996FK : 3.3-v 10-bit Addressable Scan Ports Multidrop-addressable Ieee STD 1149.1 Jtag Tap Transceivers.
SP3238E : Transceivers. No. Of TX = 5 ;; No. Of RX = 3 ;; Data Rate (kbps) = 120 ;; Supply Voltage (V) = 3.0 - 5.5 ;; Typ. Icc Current (mA) = 0.3 ;; Int. Chrg. Pump = • ;; No. Of Ext. Caps = 4 ;; Nom Cap. Value (µF) = 0.10 ;; = • ;; = • ;; = • ;; = › RS232 Compatible Down to Vcc=2.7V › Auto-online › Wakeup ;; Package.
TSB12LV42PZ : Link Layer Controllers. ti TSB12LV42, DVLYNX - High Performance 1394 3.3V Link Layer For DV, Audio And Video, 8/16-bit I/F, 8K Fifos, And.
TSB41LV03AIPFP : Physical Layer Controllers. ti TSB41LV03A, Ieee 1394a Three-port Cable Transceiver/arbiter.
TUSB5152PZ : USB Hub Controllers. ti TUSB5152, 5-Port Hub With Integrated Bridge to Ieee 1284 Port And Two Serial Ports.
UCC5614 : 9-line 3-5v Low Capacitance Scsi Active Terminator. Complies with SCSI, SCSI-2 and SCSI-3 Standards to 7V Operation 1.8pF Channel Capacitance during Disconnect 0.5µA Supply Current in Disconnect Mode 110 Ohm/2.5k Programmable Termination Completely Meets SCSI Hot Plugging -400mA Sourcing Current for Termination +400mA Sinking Current for Active Negation Drivers Trimmed Termination Current to 4% Trimmed.
ULN2803AP : Package = Dip 18 ;; Function = 8 Ch. Darlington Sink Driver ;; Rating = 50v / 0.5A.
WLP200 : Evaluation RC Filter Network - Not Recommended For New Designs..
DS25MB200 : The DS25MB200 is a dual signal conditioning 2:1 multiplexer and 1:2 fan-out buffer designed for use in backplane redundancy applications. Signal conditioning include input equalization and programmable output pre-emphasis that enable data communication in FR4 backplanes up to 2.5 Gb/s. Each input stage has a fixed equalizer to reduce ISI distortion.
MCP73871 : 8-Bit I/O Expander With Serial Interface The MCP23X08 device provides 8-bit, general 2 purpose, parallel I/O expansion for I C bus or SPI applications. The two devices differ in the number of hardware address pins and the serial interface: 2 MCP23008 – C interface; three address pins MCP23S08 – SPI interface; two address pin The MCP23X08 consists of multiple.
ISL3330 : 3.3V, ±15kV ESD Protected, Dual Protocol (RS-232/RS-485) Transceivers These devices are BiCMOS interface ICs that are user configured as either a single RS-422/RS-485 differential transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 3.15V.
SN65HVD1792 : 70-V Fault-Protected RS-485 Transceive These devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. They are also robust to ESD events, with high levels of protection to human-body model s..
ISL28207 : ±15kV ESD Protected, 3.3V, Full Fail-Safe, Low Power, High Speed Or Slew Rate Limited, RS-485/RS-422 Transceivers The ISL28107 and ISL28207 are single and dual amplifiers featuring low input bias current, low noise, and low offset and temperature drift. This makes them the ideal choice for applications requiring both high DC accuracy and AC performance.