|Category||Interface and Interconnect => SCSI => SCSI driver development|
|Title||SCSI driver development|
|Description||Pci to Dual Channel Ultra160 Scsi Host Adapter User's Guide V1.2 4/01|
|Company||LSI Logic Corporation|
|Datasheet||Download LSI22915A datasheet
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product. LSI Logic is not responsible for any radio or television interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by LSI Logic. The correction of interferences caused by such unauthorized modification, substitution, or attachment will be the responsibility of the user. The LSI22915A is tested to comply with FCC standards for home or office use.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Rčglement sur le matériel brouilleur du Canada.
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.LSI Logic Corporation North American Headquarters Milpitas, CA 408.433.8000
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB15-000155-02, Third Edition (April 2001). This document describes the LSI Logic Corporation LSI22915A PCI to Dual Channel Ultra160 SCSI Host Adapter and will remain the official reference source for all revisions/releases of this product until rescinded by an update. To receive product literature, visit us at http://www.lsilogic.com. LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties. Copyright 2001 by LSI Logic Corporation. All rights reserved. TRADEMARK ACKNOWLEDGMENT The LSI Logic logo design, SDMS, SureLINK, LVDlink, and TolerANT are registered trademarks or trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies. MH
|Some Part number from the same manufacture LSI Logic Corporation|
|LSI401Z Digital Signal Processor|
|LSI402ZX Detailedoverview of Features, Specifications, Functional Waveforms,signal Descriptions, Functional Descriptions, Instruction Setsummary And Block Diagram|
|LSI40909G-S Pci to Fibre Channel Host Adapter For Sun Solaris User's Guide Erratum-E1 V1.0 4/01|
|LSI53C040 Enclosure Services Processor Programming Guide V1.1 12/00|
|LSI53C1000 Pci to Ultra160 Scsi Controller Technical Manual V2.1 2/01|
|LSI53C1000R Pci to Ultra160 Scsi Controller Technical Manual V2.1 5/01|
|LSI53C1010-33 Pci to Dual Channel Ultra160 Scsi Multifunction Controller Technical Manual V3.2 2/01|
|LSI53C1010-66 Pci to Dual Channel Ultra160 Scsi Multifunction Controller Technical Manual V2.1 2/01|
|LSI53C1020 Pci-x to Ultra320 Scsi Controller Technical Manual V2.1 6/03|
|LSI53C1030 Pci-x to Dual Channel Ultra320 Scsi Multifunction Controller Technical Manual V2.1 6/03|
|LSI53C120 Ultra Scsi Bus Expander Technical Manual V1.0 8/01|
|LSI53C140 Ultra2 Scsi Bus Expander Technical Manual V2.1 9/01|
|LSI53C141 Scsi Bus Expander Technical Manual V2.1 11/00|
|LSI53C1510 I2O-Ready Pci Raid Ultra2 Scsi Controller Technical Manual V2.2 4/01|
|LSI53C180 Ultra160 Scsi Bus Expander Technical Manual V1.3 6/01|
|LSI53C320 Ultra320 Scsi Bus Expander Technical Manual V2.1 5/03|
80C03 : Autoduplex(tm) CMOS Ethernet Data Link Controller
CW001102 : ARM966E-S Microprocessor Core Preliminary Datasheet 9/01
DPS9245EB : Evaluation Board User's Guide 9/01
LSI53C1020 : Pci-x to Ultra320 Scsi Controller Technical Manual V2.1 6/03
LSIFC929 : Pci-x to Dual-channel Fibre Channel Solutionsthe LSIFC929X Controller Offers Industry-leading Performance at an Affordable Price. The LSIFC929X Controller Includes Three Embedded Arm Processors And Advanced Performance Features, Such as Adaptive Interrupt Coalescing And Native PCI-X. The LSIFC
NQ8104 : Gigabit Ethernet Controller
NQ84220 : Transceiver/Repeater Quad 100basetx/100basefx/10baset Physical Layer Device
USBHOSTCORE : FPGA/PLD Soft Core Host Core For Universal Serial Bus Solutions
BA6463 : 3-phase Motor Driver. The is a motor driver developed for cylinders, which a constant power supply of 5V, and the start and stop pins which opens output are incorporated. FApplications VCR cylinder motors F 1) 3-phase, full-wave, pseudo-linear drive system. 2) Internal constant voltage power supply. (5V) 3) Internal thermal shutdown circuit. FBlock diagram .
LX5218 : Terminator. 9-channel Plug And Play Scsi Terminator. The LX5218 SCSI terminator is part of Linfinity's UltraMAX family of high-performance, adaptive, nonlinear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low voltage BiCMOS architecture employed in their design offers superior performance to older linear passive and active techniques. Linfinity's.
M16450 : Universal Asynchronous Receiver/transmitter. Core Specifics Device Family Spartan XC4000E CLBs Used 188 IOBs Used 341 CLKIOBs Used 4 System Clock fmax 18.4 MHz 18.4 MHz Device Used Global Buffers Supported Devices/Resources Remaining I/O CLBs 1551 596 Provided with Core Documentation Core Design Document Designers application note Design File Formats.ngd, XNF netlist Verilog Source RTL available.
M66311 : 16-bit Led Driver With Shift Register And Latch.
MAX239C : +5v-powered, Multichannel Rs-232 Drivers/receivers. The MAX220MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mode reduces power dissipation to less than 5µW. The MAX233, MAX235, and MAX245/MAX246/MAX247.
MAX3314 : 460kbps, 1 A, RS-232-Compatible Transceiver. The a ±5V powered EIA/TIA-232-compatible interface. It has one transmitter and one receiver in a flow-through architecture. The transmitter has a lowdropout output stage providing minimum RS-232-compatible ±3.7V output levels while driving 3k and at 460kbps. Both +5V and -5V are supplied externally. The MAX3314 has a SHDN function that reduces supply.
MH88634CV-K : Central Office Interface Circuits. = Loop Start Central Office Interface Circuit With Korean Line Impedance ;; Package Type = N/a ;; No. Of Pins =.
SN55ALS195 : Quadruple Differential Line Receiver. The SN55ALS195 and SN75ALS195 are four differential line receivers with 3-state outputs designed using advanced low-power Schottky technology. This technology provides combined improvements in die design, tooling production, and wafer fabrication, which in turn, provide lower power consumption and permit much higher data throughput than other designs.
SN65LVDT388A : High-speed Differential Line Receivers. Four ('390), Eight (`388A), or Sixteen (`386) Line Receivers Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard Integrated 110- Line Termination Resistors on LVDT Products Designed for Signaling Rates To 630 Mbps SN65 Version's Bus-Terminal ESD Exceeds 15 kV Operates From a Single 3.3-V Supply Typical Propagation Delay Time 2.6 ns Output Skew.
SN75LBC031 : . SN65LBC031Q, SN75LBC031 HIGH-SPEED CONTROLLER AREA NETWORK (CAN) TRANSCEIVERS SN75LBC031 Meets Standard ISO/DIS 11898 (up 500 k Baud) Driver Output Capability 50 mA Wide Positive and Negative Input/output Bus Voltage Range Bus Outputs Short-Circuit-Protected to Battery Voltage and Ground Thermal Shutdown Available in Q-Temp Automotive HighRel Automotive.
SN75LVDS88B : TFT LCD Panel Timing Controller With LVDS Interface. SN75LVDS88B TFT LCD PANEL TIMING CONTROLLER WITH LVDS INTERFACE Flatlink Interface Utilizes Low Power Differential Signalling(LVDS) Suitable for Notebook Application XGA Resolution Six Bit System Interface Support Mainstream Data and Gate Drivers Optional Configurable Pins Low Voltage CMOS 3.3-V Technology 65 MHz Phase-Lock Input 100-pin TQFP Package.
ST890B : 1.2 Current Limited High Side With Thermal Shutdown. 1.2A CURRENT LIMITED HIGH SIDE WITH THERMAL SHUTDOWN TO 5.5V INPUT RANGE PROGRAMMABLE CURRENT LIMIT TO 1.2A LOW QUIESCENT CURRENT THERMAL SHUTDOWN FAULT INDICATOR OUTPUT 90m (TYP.) ON RESISTANCE SO-8 PACKAGE The is a low voltage, P-Channel MOSFET power switch intended for high side load switching applications. This switch operates with inputs from to 5.5V,.
PESD5V0S1BA : Low capacitance ElectroStatic Discharge (ESD) protection diodes in ultra small SMD plastic packages designed to protect one signal line from the damage caused by ESD and other transients..
MAX13181E : +5.0V, ±15kV ESD-Protected, Half-Duplex/Full-Duplex, RS-485 Transceiver in µDFN The MAX13181E–MAX13184E are full-duplex and selectable half-/full-duplex RS-485 transceivers in a tiny 2mm x 2mm µDFN package. These devices are designed for space-constrained applications by including extended ESD protection to ±15kV per Human Body Model (HBM) and integrating.
MAX3095 : ±15kV ESD-Protected, 10Mbps, 3V/5V, Quad RS-422/RS-485 Receivers The MAX3095/MAX3096 are rugged, low-power, quad, RS-422/RS-485 receivers with electrostatic discharge (ESD) protection for use in harsh environments. All receiver inputs are protected to ±15kV using IEC 1000-4-2 Air-Gap Discharge, ±8kV using IEC 1000-4-2 Contact Discharge, and ±15kV using.
SN65LVCP114 : 14.2Gbps Quad Mux, Linear-Redriver With Signal Conditioning The SN65LVCP114 is an asynchronous, protocol-agnostic, low-latency QUAD mux, linear-redriver optimized for use in systems operating at up to 14.2 Gbps. The device linearly compensates for channel loss in backplane and active-cable applications. The architecture of SN65LVCP114 linear-redriver.