Details, datasheet, quote on part number: LSI21003
PartLSI21003
CategoryInterface and Interconnect => SCSI => SCSI driver development
TitleSCSI driver development
DescriptionPci to Dual Channel Scsi Host Adapter User's Guide V1.0 10/00
CompanyLSI Logic Corporation
DatasheetDownload LSI21003 datasheet
  

 

Features, Applications

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product. LSI Logic is not responsible for any radio or television interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by LSI Logic. The correction of interferences caused by such unauthorized modification, substitution, or attachment will be the responsibility of the user. The LSI21003 is tested to comply with FCC standards for home or office use.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

LSI Logic Corporation North American Headquarters Milpitas, CA 408.433.8000

This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB15-000165-00, First Edition (October 2000) This document describes Version 1.0 of the LSI Logic Corporation LSI21003 PCI to Dual Channel SCSI Host Adapter and will remain the official reference source for all revisions/releases of this product until rescinded by an update. To receive product literature, visit us at http://www.lsilogic.com. LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties. Copyright 2000 by LSI Logic Corporation. All rights reserved. TRADEMARK ACKNOWLEDGMENT The LSI Logic logo design, SCRIPTS, and SDMS are trademarks or registered trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies. HH


 

Some Part number from the same manufacture LSI Logic Corporation
LSI21040 Pci to Dual Channel Ultra 160 Scsi Host Adapter User's Guide V1.1 11/00
LSI22902 Host Adapter to Intel ISP1100 Internet Server Quick Installation Guide V1.1 11/00
LSI22903
LSI22910 Pci to Dual Channel Pci to Ultra2 Scsi Host Adapter User's Guide V1.1 12/00
LSI22915A Pci to Dual Channel Ultra160 Scsi Host Adapter User's Guide V1.2 4/01
LSI401Z Digital Signal Processor
LSI402Z
LSI402ZX Detailedoverview of Features, Specifications, Functional Waveforms,signal Descriptions, Functional Descriptions, Instruction Setsummary And Block Diagram
LSI403LP
LSI403Z
LSI40909G-S Pci to Fibre Channel Host Adapter For Sun Solaris User's Guide Erratum-E1 V1.0 4/01
LSI53C040 Enclosure Services Processor Programming Guide V1.1 12/00
LSI53C1000 Pci to Ultra160 Scsi Controller Technical Manual V2.1 2/01
LSI53C1000R Pci to Ultra160 Scsi Controller Technical Manual V2.1 5/01
LSI53C1010
LSI53C1010-33 Pci to Dual Channel Ultra160 Scsi Multifunction Controller Technical Manual V3.2 2/01
LSI53C1010-66 Pci to Dual Channel Ultra160 Scsi Multifunction Controller Technical Manual V2.1 2/01
LSI53C1010R
LSI53C1020 Pci-x to Ultra320 Scsi Controller Technical Manual V2.1 6/03
LSI53C1030 Pci-x to Dual Channel Ultra320 Scsi Multifunction Controller Technical Manual V2.1 6/03
LSI53C120 Ultra Scsi Bus Expander Technical Manual V1.0 8/01

AVIA-9600 :

L64363 :

L64781 : Single-chip Cofdm (coded Orthogonal Frequency Division Multiplex) Demod-ulator.

LSI53C1030 : Pci-x to Dual Channel Ultra320 Scsi Multifunction Controller Technical Manual V2.1 6/03

LSI53C320 : SCSI bus expanders and enclosure Ultra320 Scsi Bus Expander Technical Manual V2.1 5/03

LSI53C895 : SCSI integrated circuits Pci to Ultra2 Scsi I/o Processor With LVD Link Universal Transceivers Technical Manual V3.2 12/00

NCR65C02 :

NCR90C98 :

QQ84220 : Transceiver/Repeater Quad 100basetx/100basefx/10baset Physical Layer Device

SYM53C895 : Controller Pci-to-ultra2 Scsi I/o Processor

LSISAS1064 : PCI-X to 4-port 3 Gb/s SAS Controller The LSISAS1064 four-port controller provides 1.5 and 3 Gb/s data transfer rates per port and enables Integrated RAID solutions in storage environments including servers, workstations, blade servers and external storage systems. The controller also leverages an

Same catergory

709269 : Multi-Ports. 16K X 16 Sync, Dual-port RAM, Pipelined/flow-through. True Dual-Ported memory cells which allow simultaneous access of the same memory location High-speed clock to data access ­ Commercial: 9/12/15ns (max.) Low-power operation ­ IDT709269S Active: 950mW (typ.) Standby: 5mW (typ.) ­ IDT709269L Active: 950mW (typ.) Standby: 1mW (typ.) Flow-through or Pipelined output mode on either port via the FT/PIPE pin Counter.

82C55A : Chmos Programmable Peripheral Interface. Compatible with all Intel and Most Other Microprocessors High Speed ``Zero Wait State'' Operation with 8 MHz 8086 88 and 188 24 Programmable I O Pins Low Power CHMOS Completely TTL Compatible Control Word Read-Back Capability Direct Bit Set Reset Capability mA DC Drive Capability on all I O Port Outputs Available in 40-Pin DIP and 44-Pin PLCC Available.

AD7306 : +5 V Powered RS-232/RS-422 Transceiver. RS-232 and RS-422 on One Chip Single +5 V Supply 0.1 F Capacitors Short Circuit Protection Excellent Noise Immunity Low Power BiCMOS Technology High Speed, Low Skew RS-422 Operation to +85C Operations APPLICATIONS DTE-DCE Interface Packet Switching Local Area Networks Data Concentration Data Multiplexers Integrated Services Digital Network (ISDN) GENERAL.

LB1952M : 3-phase Brushless Motor Driver For VTR Capstan. . 3-phase full-wave current linear drive system. Torque ripple correction circuit built in (variable correction. factor) limiting circuit built in. Current Output stage upper/lower oversaturation prevention circuit in (no external capacitor required). built FG amplifier built in. Thermal shutdown circuit built in SANYO Electric Co.,Ltd. Semiconductor.

LX5218 : Terminator. 9-channel Plug And Play Scsi Terminator. The LX5218 SCSI terminator is part of Linfinity's UltraMAX family of high-performance, adaptive, nonlinear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low voltage BiCMOS architecture employed in their design offers superior performance to older linear passive and active techniques. Linfinity's.

MCP2551 : High-speed CAN Transceiver, Industry-standard Pinout, ISO-118980 Compatible.

MIC2529 : Single-channel Usb Power Controller. The is a high-side power switch optimized for selfpowered (individual port switching) and bus-powered (ganged port switching) Universal Serial Bus (USB) hub applications. An on-board voltage regulator provides the 3.3V supply voltage needed for many USB microcontrollers reducing board component count. The MIC2529 satisfies the following USB requirements:.

PC87570 : Keyboard And Power Management Controller (preliminary). The is a highly integrated embedded RISC-based controller optimized for power management (PM), keyboard and mouse (KBC) and system control in portable Personal Computer (PC) applications. The PC87570 incorporates National's CompactRISCTM CR16A core, a high performance 16-bit RISC processor core, a Bus Interface Unit (BIU) that directly interfaces with.

SN75ALS175 : Quadruple Differential Line Receiver. Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B, EIA/TIA-423-B, and RS-485 Meets ITU Recommendations V.11, X.26, and X.27 Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments Low Supply Current Requirement 27 mA Max Common-Mode Input Voltage Range 12 V Input Sensitivity. 200 mV Input Hysteresis. 50 mV Typ High Input.

SN75ALS176AD : ti SN75ALS176A, Differential Bus Transceiver. Meet or Exceed the Requirements TIA/EIA-422-B, TIA/EIA-485-A and ITU Recommendations V.11 and X.27 Operate at Data Rates to 35 Mbaud Four Skew Limits Available: 5 ns Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments Low Supply-Current Requirements. 30 mA Max Wide Positive and Negative Input/Output Bus-Voltage Ranges Thermal.

TSB41AB2PAP : Physical Layer Controllers. ti TSB41AB2, Ieee 1394a Two-port Cable Transceiver/arbiter.

UCC5696PN : SCSI Bus Termination. ti UCC5696, 27-Line LVD Only Scsi Terminator For SPI-5 And Beyond.

V370PDC : PCI Controllers. High Performance Pci Target Interface. High Performance PCI SDRAM Controller with Integrated Peripheral Control Unit Fully compliant with PCI 2.2 target interface Multiplexed or Non-multiplexed or 32-bit generic peripheral bus interface Support to 1 Gbyte of SDRAM Support to 2 single banks or 1 dual bank industrial standard 168-pin PC SDRAM DIMM Support 1Kbyte of burst access from PCI to 5 programmable.

SN65C3222E : 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver With +/-15-kV ESD (HBM) Protection APPLICATIONS /ORDERING DB, DW, OR PW PACKAGE (TOP VIEW) 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 EN C1+ V+ C1− C2+ C2− V− DOUT2 RIN2 ROUT2 PWRDOWN VCC GND DOUT1 RIN1 ROUT1 NC DIN1 DIN2 NC NC − No internal connection RHL PACKAGE.

ISO3088 : Isolated 5-V Full & Half-Duplex RS-485 Transceivers The ISO3080, and ISO3086 are isolated full-duplex differential line drivers and receivers while the ISO3082, and ISO3088 are isolated half-duplex differential line transceivers for TIA/EIA 485/422 applications. These devices are ideal for long transmission lines since the ground loop is broken to allow.

 
0-C     D-L     M-R     S-Z