Details, datasheet, quote on part number: PDM4M4110S20Z
PartPDM4M4110S20Z
CategoryMemory => SRAM => Modules => 256 KB
Description512kx32 CMOS Static RAM Module
CompanyIXYS Corporation
DatasheetDownload PDM4M4110S20Z datasheet
  

 

Features, Applications

Features

High-density 2 megabyte Static RAM module Low profile 72-pin ZIP (Zig-zag In-line vertical Package) or 72-pin SIMM (Single In-line Memory Module) Fast access time: 15 ns (max.) Surface mounted plastic components on an epoxy laminate (FR-4) substrate Single 5V (10%) power supply Multiple VSS pins and decoupling capacitors for maximum noise immunity Inputs/outputs directly TTL compatible

The PDM4M4110 is packaged 72-pin FR-4 ZIP (Zig-zag In-line vertical Package) a 72-pin SIMM (Single In-line Memory Module). The ZIP configuration allows 72 pins to be placed on a package 3.95" long and 0.250" wide. At only 0.600" high, this lowprofile package is ideal for systems with minimum board spacing. The SIMM configuration allows use of edge mounted sockets to secure the module. All inputs and outputs of the PDM4M4110 are TTL compatible and operate from a single 5V supply. Multiple ground pins and on board decoupling capacitors provide maximum immunity from noise. Four identification pins PD2, PD3) are provided for applications in which different density versions of the module are used. In this way, the target system can read the respective levels PD3 to determine a 512K depth.

Description

The x 32 static RAM module constructed on an epoxy laminate (FR-4) substrate using four x 8 static RAMs in plastic SOJ packages. Availability of four chip select lines provides byte access. The PDM4M4110 is available with access times as fast 15 ns with minimal power consumption.

Data Inputs/Outputs Addresses Chip Selects Write Enable Output Enable Depth Identification Power Ground No Connect

NOTE: 1. Pins 4, 6, and PD1, PD02, and PD3 respectively) are read by the user to determine the density of the module. If PD0 reads NC, PD1 reads NC, PD2 reads OPEN, PD3 reads NC then the module has a 512K depth.

Mode Deselect/ Power-down Read Write Deselect

Symbol VTERM TBIAS TSTG TA PT IOUT Rating Terminal Voltage with Respect to VSS Temperature Under Bias Storage Temperature Operating Temperature Power Dissipation DC Output Current Com'l. 1.0 50 Ind. 1.0 50 Unit W mA

NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Symbol VCC VSS Commercial Parameter Supply Voltage Supply Voltage Ambient Temperature Min. 4.5 0 Typ. 0 25 Max. 0 70 Unit V C


 

Related products with the same datasheet
PDM4M4110S-15
PDM4M4110S-20
PDM4M4110S-25
PDM4M4110S-35
PDM4M4110S15M
PDM4M4110S15Z
PDM4M4110S20M
PDM4M4110S25M
PDM4M4110S25Z
PDM4M4110S35M
PDM4M4110S35Z
Some Part number from the same manufacture IXYS Corporation
PDM4M4110S25M 512kx32 CMOS Static RAM Module
PDM4M4120 1mx32 CMOS Static RAM Module
UGB3132AD
VBE100-06NO7
VBE100-12NO7
VBE17-06NO7 Eco-pac(tm) Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred): 600v, 27a
VBE17-12NO7
VBE20 Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred)
VBE20-20NO1
VBE26-06NO7 Eco-pac(tm) Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred): 600v, 44a
VBE26-12NO7
VBE55-06NO7
VBE55-12NO7
VBO105 Single Phase Rectifier Bridge
VBO105-08NO7 800V Single Phase Rectifier Bridge
VBO125 Single Phase Rectifier Bridge
VBO125-08NO7 800V Single Phase Rectifier Bridge
VBO13-08NO2 Single Phase Rectifier Bridge
VBO130
VBO130-08NO7 800V Single Phase Rectifier Bridge
VBO160 Single Phase Rectifier Bridge

IXFH76N07-12 : with FAST Intrinsic Diode

MDD172-18N1 : 800V High Power Diode Module

PDM31096SA8SOTY : 4 MB 3.3v Static RAM 512kx8-bit

PDM31532SA20TTR : 64kx16 CMOS 3.3v Static RAM

VBE20-20NO1 :

IXGT30N60BU1 : Hiperfast IGBT with Diode

DWHFP69-12S : Rectifier Diodes & FRED

IXFN17N80 : Hiperfet Power Mosftets

IXD611P7 : Pmic - Mosfet, Bridge Driver - External Switch Integrated Circuit (ics) - Tube - -; IC DRVR HALF BRIDGE 600MA 14-PDI Specifications: Configuration: - ; Voltage - Supply: - ; Current - Peak: - ; Delay Time: - ; Package / Case: - ; Packaging: Tube ; Number of Outputs: - ; Input Type: - ; Number of Configurations: - ; Operating Temperature: - ; High Side Voltage - Max (Bootstrap): - ; Lead Free Status: Lead Free ; Ro

IXFN140N30P : Fet Semiconductor Module; MOSFET N-CH 300V 110A SOT-227B Specifications: Mounting Type: Chassis Mount ; FET Type: MOSFET N-Channel, Metal Oxide ; Drain to Source Voltage (Vdss): 300V ; Current - Continuous Drain (Id) @ 25 C: 110A ; Rds On (Max) @ Id, Vgs: 24 mOhm @ 70A, 10V ; Input Capacitance (Ciss) @ Vds: 14800pF @ 25V ; Power - Max: 700W ; Packaging:

IXGN400N30A3 : 400 A, 300 V, N-CHANNEL IGBT Specifications: Polarity: N-Channel ; Package Type: MINIBLOC-4 ; Number of units in IC: 1

MIXA10W1200TML : 17 A, 1200 V, N-CHANNEL IGBT Specifications: Polarity: N-Channel ; Package Type: MODULE-22 ; Number of units in IC: 6

 
0-C     D-L     M-R     S-Z