Details, datasheet, quote on part number: PDM4M4060S15AM
PartPDM4M4060S15AM
CategoryMemory => SRAM => Modules => 256 KB
Description256kx32 CMOS Static RAM Module
CompanyIXYS Corporation
DatasheetDownload PDM4M4060S15AM datasheet
  

 

Features, Applications
Features

High-density 8 megabit Static RAM module) Low profile 72-lead SIMM and Angled SIMM (Single In-line Memory Module) Very fast access time: 10 ns (max.) Surface mounted plastic components on an epoxy laminate (FR-4) substrate Single 5V (10%) power supply Multiple VSS pins and decoupling capacitors for maximum noise immunity Inputs/outputs directly TTL compatible

The PDM4M4060 is packaged a 72-lead SIMM (Single In-line Memory Module). The SIMM configuration allows 72 leads to be placed on a package 4.25" long and 0.35" wide. At only 0.650" high, this low-profile package is ideal for systems with minimum board spacing. The SIMM configuration allows use of angled sockets to reduce the effective module height further. The Angled SIMM configuration allows 72 leads to be placed on a package 4.255" long and 0.35" wide. At only 0.680" high, this low-profile package is ideal for systems with minimum board spacing. All inputs and outputs of the PDM4M4060 are TTL compatible and operate from a single 5V supply. Full asynchronous circuitry requires no clock or refresh for operation and provides equal access and cycle times for ease of use. Four identification pins (PD3-PD0) are provided for applications in which different density versions of the module are used. In this way, the target system can read the respective levels PD3-PD0 to determine a 256K depth.

Description

The x 32 static RAM module constructed on an epoxy laminate (FR-4) substrate using eight x 4 static RAMs in plastic SOJ packages. Availability of four chip select lines (one for each of two RAMs) provides byte access. The PDM4M4060 is available with access times as fast 15 ns with minimal power consumption.

Data Inputs/Outputs Addresses Chip Selects Write Enable Output Enable Depth Identification Power Ground No Connect

NOTE: 1. Pins 4, 5, and 7 (PD3-PD0) are read by the user to determine the density of the module. PD0, PD1 reads VSS and PD2, PD3 reads OPEN then the module has a 256K depth.

Mode Deselect/ Power-down Read Write Deselect

Symbol VTERM TBIAS TSTG TA PT IOUT Rating Terminal Voltage with Respect to VSS Temperature Under Bias Storage Temperature Operating Temperature Power Dissipation DC Output Current Com'l. 1.0 50 Ind. 1.0 50 Unit W mA

NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Symbol VCC VSS Commercial Parameter Supply Voltage Supply Voltage Ambient Temperature Min. 4.75 0 Typ. 0 25 Max. 0 70 Unit V C


 

Related products with the same datasheet
PDM4M4060S-10
PDM4M4060S-12
PDM4M4060S-15
PDM4M4060S-20
PDM4M4060S-25
PDM4M4060S10AM
PDM4M4060S10M
PDM4M4060S12AM
PDM4M4060S12M
PDM4M4060S15M
PDM4M4060S20AM
Some Part number from the same manufacture IXYS Corporation
PDM4M4060S15M 256kx32 CMOS Static RAM Module
PDM4M4110 512kx32 CMOS Static RAM Module
PDM4M4120 1mx32 CMOS Static RAM Module
UGB3132AD
VBE100-06NO7
VBE100-12NO7
VBE17-06NO7 Eco-pac(tm) Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred): 600v, 27a
VBE17-12NO7
VBE20 Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred)
VBE20-20NO1
VBE26-06NO7 Eco-pac(tm) Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred): 600v, 44a
VBE26-12NO7
VBE55-06NO7
VBE55-12NO7
VBO105 Single Phase Rectifier Bridge
VBO105-08NO7 800V Single Phase Rectifier Bridge
VBO125 Single Phase Rectifier Bridge
VBO125-08NO7 800V Single Phase Rectifier Bridge
VBO13-08NO2 Single Phase Rectifier Bridge
VBO130
VBO130-08NO7 800V Single Phase Rectifier Bridge

40N60BD1 : Low Voltage < 600 Volts Igbt With Diode Plus247 (tm) Package

IXFH35N30 : HiperFET (tm) Power MOSFETs N-channel Enhancement Mode High Dv/dt, Low T RR , Hdmos (tm) Family: 300v, 35a

PDM31532LA12SOTR : 64kx16 CMOS 3.3v Static RAM

VCO132-18IO7 :

IXTA180N055T : Trench Gate Power Mosfet

IXFN26N100P : Fet Semiconductor Module; MOSFET N-CH 1000V 23A SOT-227B Specifications: Mounting Type: Chassis Mount ; FET Type: MOSFET N-Channel, Metal Oxide ; Drain to Source Voltage (Vdss): 1000V (1kV) ; Current - Continuous Drain (Id) @ 25 C: 23A ; Rds On (Max) @ Id, Vgs: 390 mOhm @ 13A, 10V ; Input Capacitance (Ciss) @ Vds: 11900pF @ 25V ; Power - Max: 595W ; Pack

CWP50-12/18 : 138.16 A, 1600 V, SCR Specifications: VDRM: 1600 volts ; VRRM: 1600 volts ; IT(RMS): 138 amps ; IGT: 150 mA ; Standards and Certifications: RoHS ; Package Type: DIE

IXFD24N100F-9F : 1000 V, 0.42 ohm, N-CHANNEL, Si, POWER, MOSFET Specifications: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 1000 volts ; rDS(on): 0.4200 ohms ; Package Type: 0.559 X 0.417 INCH, DIE ; Number of units in IC: 1

IXFD40N50Q2-84 : 300 V, 0.09 ohm, N-CHANNEL, Si, POWER, MOSFET Specifications: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 300 volts ; rDS(on): 0.0900 ohms ; Package Type: 0.348 X 0.283 INCH, DIE ; Number of units in IC: 1

IXTT2N170D2 : POWER, FET

 
0-C     D-L     M-R     S-Z