Details, datasheet, quote on part number: PDM4M4050S-15
CategoryMemory => SRAM => Modules => SRAM Module
Description256kx32 Bicmos/cmos Static RAM Module
CompanyIXYS Corporation
DatasheetDownload PDM4M4050S-15 datasheet


Features, Applications

High-density 8 megabit Static RAM module Low profile 64-pin ZIP, 64 -pin SIMM (Single Inline Memory Module) or Angled SIMM. Ultra fast access time: 10 ns (max.) Surface mounted plastic components on an epoxy laminate (FR-4) substrate Single 5V (10%) power supply Multiple VSS pins and decoupling capacitors for maximum noise immunity Inputs/outputs directly TTL-compatible

The PDM4M4050 is packaged 64-pin FR-4 ZIP (Zig-zag In-line vertical Package) a 64-pin SIMM (Single In-line Memory Module). The Angled SIMM configuration allows 64 pins to be placed on a package 3.50" long and 0.35" wide and 0.68" high. The SIMM configuration also allows use of edge mounted sockets to secure the module. All inputs and outputs of the PDM4M4050 are TTLcompatible and operate from a single 5V supply. Full asynchronous circuitry requires no clocks or refresh for operation and provides equal access and cycle times for ease of use. Two identification pins (PD0 and PD1) are provided for applications in which different density versions of the module are used. In this way, the target system can read the respective levels of PD0 and PD1 to determine a 256K depth.


The x 32 static RAM module constructed on an epoxy laminate (FR-4) substrate using eight x 4 static RAMs in plastic SOJ packages. Availability of four chips select lines (one for each group of two RAMs) provides byte access. Extremely fast speeds can be achieved due to the use of 1 megabit static RAMs fabricated in Paradigm's high-performance, high-reliability technology. The PDM4M4050 is available with access time as fast 10 ns with minimal power consumption.

Data Inputs/Outputs Addresses Chip Selects Write Enable Output Enable Depth Identification Power Ground

NOTE: 1. Pins 2 and 3 (PD0 and PD1) are read by the user to determine the density of the module. If PD0 reads VSS and PD1 reads VSS then the module has a 256K depth.

Mode Deselect/ Power-down Read Write Deselect

Symbol VTERM TBIAS TSTG TA PT IOUT Rating Terminal Voltage with Respect to VSS Temperature Under Bias Storage Temperature Operating Temperature Power Dissipation DC Output Current Com'l. 1.0 50 Ind. 1.0 50 Unit W mA

NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Symbol VCC VSS Commercial Parameter Supply Voltage Supply Voltage Ambient Temperature Min. 4.75 0 Typ. 0 25 Max. 0 70 Unit V C


Related products with the same datasheet
Some Part number from the same manufacture IXYS Corporation
PDM4M4050S-20 256kx32 Bicmos/cmos Static RAM Module
PDM4M4060 256kx32 CMOS Static RAM Module
PDM4M4110 512kx32 CMOS Static RAM Module
PDM4M4120 1mx32 CMOS Static RAM Module
VBE17-06NO7 Eco-pac(tm) Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred): 600v, 27a
VBE20 Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred)
VBE26-06NO7 Eco-pac(tm) Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred): 600v, 44a
VBO105 Single Phase Rectifier Bridge
VBO105-08NO7 800V Single Phase Rectifier Bridge
VBO125 Single Phase Rectifier Bridge
VBO125-08NO7 800V Single Phase Rectifier Bridge
VBO13-08NO2 Single Phase Rectifier Bridge

CS45-16IO1 : Phase Control Thyristor

MEE250-12DA : Fast Recovery Epitaxial Diode (fred) Module

PDM31564SA20TI : 256kx16 CMOS 3.3v Static RAM

VBO30-12NO8 :

IXTK150N15P : Polar N-channel MOSFETs International standard packages 􀁺 Unclamped Inductive Switching (UIS) rated 􀁺 Low package inductance - easy to drive and to protect

LDS8681008-T2 : Pmic - Led Driver Integrated Circuit (ics) Flash/Torch - -; IC LED DRIVER PHOTO FLASH 16WQFN Specifications: Type - Primary: Flash/Torch ; Type - Secondary: High Brightness LED (HBLED) ; Number of Outputs: 2 ; Constant Current: - ; Constant Voltage: - ; Topology: Linear (LDO), PWM, Switched Capacitor (Charge Pump) ; Frequency: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

IXFX52N30Q : 52 A, 300 V, 0.06 ohm, N-CHANNEL, Si, POWER, MOSFET Specifications: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 300 volts ; rDS(on): 0.0600 ohms ; Package Type: TO-247, TO-247AD, 3 PIN ; Number of units in IC: 1

IXGF20N300 : 22 A, 3000 V, N-CHANNEL IGBT Specifications: Polarity: N-Channel ; Package Type: PLASTIC, ISOPLUS, I4PAK-3 ; Number of units in IC: 1

IXSH10N60B2D1 : 20 A, 600 V, N-CHANNEL IGBT, TO-247AD Specifications: Polarity: N-Channel ; Package Type: TO-247, TO-247AD, 3 PIN ; Number of units in IC: 1

IXTA15P15T : 15 A, 150 V, 0.24 ohm, P-CHANNEL, Si, POWER, MOSFET, TO-263AA Specifications: Polarity: P-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 150 volts ; rDS(on): 0.2400 ohms ; Package Type: PLASTIC PACKAGE-3 ; Number of units in IC: 1

0-C     D-L     M-R     S-Z