Details, datasheet, quote on part number: PDM4M4030S15M
CategoryMemory => SRAM => Modules => 256 KB
Description64kx32 CMOS Static RAM Module
CompanyIXYS Corporation
DatasheetDownload PDM4M4030S15M datasheet


Features, Applications

High-density 2 megabit Static RAM module Low profile 64-pin ZIP (Zig-zag In-line vertical Package), 64-pin SIMM or Angled SIMM (Single In-line Memory Module) Ultra fast access time: 10 ns (max.) Surface mounted plastic components on an epoxy laminate (FR-4) substrate Single 5V (10%) power supply Multiple VSS pins and decoupling capacitors for maximum noise immunity Inputs/outputs directly TTL compatible

The PDM4M4030 is packaged 64-pin FR-4 ZIP (Zig-zag In-line vertical Package), a 64-pin SIMM or Angled SIMM (Single In-line Memory Module). The ZIP configuration allows 64 pins to be placed on a package 3.65" long and 0.35" wide. At only 0.650" high, this low-profile package is ideal for systems with minimum board spacing. The SIMM configuration allows use of edge mounted sockets to secure the module. All inputs and outputs of the PDM4M4030 are TTL compatible and operate from a single 5V supply. Full asynchronous circuitry requires no clock or refresh for operation and provides equal access and cycle times for ease of use. Two identification pins (PD0 and PD1) are provided for applications in which different density versions of the module are used. In this way, the target system can read the respective levels of PD0 and PD1 to determine a 64K depth.

The x 32 static RAM module constructed on an epoxy laminate (FR-4) substrate using eight x 4 static RAMs in plastic SOJ packages. Availability of four chip select lines (one for each of two RAMs) provides byte access. Extremely fast speeds can be achieved due to the use of 256K Static RAMs fabricated in Paradigm's highperformance, high-reliability CMOS technology. The PDM4M4030 is available with access times as fast 10 ns with minimal power consumption.

Data Inputs/Outputs Addresses Chip Selects Write Enable Output Enable Depth Identification Power Ground No Connect

NOTE: 1. Pins 2 and 3 (PD0 and PD1) are read by the user to determine the density of the module. If PD0 reads OPEN and PD1 reads VSS then the module has a 64K depth.

Mode Deselect/ Power-down Read Write Deselect

Symbol VTERM TBIAS TSTG TA PT IOUT Rating Terminal Voltage with Respect to VSS Temperature Under Bias Storage Temperature Operating Temperature Power Dissipation DC Output Current Com'l. 1.0 50 Ind. 1.0 50 Unit W mA

NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Symbol VCC VSS Commercial Parameter Supply Voltage Supply Voltage Ambient Temperature Min. 4.75 0 Typ. 0 25 Max. 0 70 Unit V C


Related products with the same datasheet
Some Part number from the same manufacture IXYS Corporation
PDM4M4030S15Z 64kx32 CMOS Static RAM Module
PDM4M4040 128kx32 CMOS Static RAM Module
PDM4M4050 256kx32 Bicmos/cmos Static RAM Module
PDM4M4060 256kx32 CMOS Static RAM Module
PDM4M4110 512kx32 CMOS Static RAM Module
PDM4M4120 1mx32 CMOS Static RAM Module
VBE17-06NO7 Eco-pac(tm) Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred): 600v, 27a
VBE20 Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred)
VBE26-06NO7 Eco-pac(tm) Single Phase Rectifier Bridge With Fast Recovery Epitaxial Diodes (fred): 600v, 44a

IXGH30N60BU1 : IGBT with FAST Diodes

IXLF19N250A : High Voltage 1200 Volts High Voltage Igbt in High Voltage ISOplus I4-pac(tm): 2200v, 32a

IXFA10N60P : Polar MOSFETs with Fast Intrinsic Diode # BVDSS up to 600V # Avalanche rated # Fast trr intrinsic diode # ID(25): 1A - 200A

DSS6-0025BS : Power Schottky Diodes * Voltage range: 8V - 200V, 600V _ Current Range: 1A - 400A. * Package styles: SMA and SMB surface mount, TO-220, ISOPLUS220 (isolated TO-220), TO-263, TO-247 ISOPLUS247, ISOPLUS i4-PAC, and SOT-227B and non-isolated SOT-227B.

IXTH12N50 : 12 Amps, 450-500v, 0.4om/0.5om

IXGH40N30 : Low Vce(sat) Igbt, High Speed IGBT

IXTK600N04T2 : Power Driver ICs GigaMOS Trench T2 HiperFET PWR MOSFET IXYS GigaMOS ™ TrenchT2 ™ standard and HiPerFET ™ Power MOSFETs are offered with drain-to-source voltage ratings from 40V to 170V and provide high current capabilities of up to 600A (Tc=@25ºC). The combined high current ratings of these devices and available compact pac

IXTH62N25T : Fet - Single Discrete Semiconductor Product 62A 250V - Through Hole; MOSFET N-CH 250V 62A TO-247 Specifications: Mounting Type: Through Hole ; FET Type: MOSFET N-Channel, Metal Oxide ; Drain to Source Voltage (Vdss): 250V ; Current - Continuous Drain (Id) @ 25 C: 62A ; Rds On (Max) @ Id, Vgs: - ; Input Capacitance (Ciss) @ Vds: - ; Power - Max: - ; Packaging: Tube ; Gate Charge (Qg) @ Vgs: - ;

VUO25-08NO8 : Bridge Rectifier Discrete Semiconductor Product 25A 800V Three Phase; RECT BRIDGE 3PH 25A 800V PWS-E-1 Specifications: Diode Type: Three Phase ; Package / Case: PWS-E1 ; Packaging: Bulk ; Reverse Recovery Time (trr): - ; Speed: Standard Recovery >500ns,>200mA (Io) ; Current - DC Forward (If): 25A ; Voltage - Peak Reverse (Max): 800V ; Mounting Type: QC Terminal ; Lead Free Status: Lead Free ; RoHS St

DHG10I1200PM : Diodes, Rectifier - Single Discrete Semiconductor Product 10A 1200V (1.2kV) Standard; DIODE FST REC 1200V10A TO220FPAC Specifications: Diode Type: Standard ; Voltage - DC Reverse (Vr) (Max): 1200V (1.2kV) ; Current - Average Rectified (Io): 10A ; Voltage - Forward (Vf) (Max) @ If: 2.69V @ 10A ; Reverse Recovery Time (trr): 75ns ; Current - Reverse Leakage @ Vr: 15A @ 1200V ; Speed: Fast Recovery =< 500ns,>200mA

FMM150-0075X2F : 120 A, 75 V, 0.0058 ohm, 2 CHANNEL, N-CHANNEL, Si, POWER, MOSFET Specifications: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 75 volts ; rDS(on): 0.0058 ohms ; Package Type: PLASTIC, ISOPLUS, I4PAK-5 ; Number of units in IC: 2

IXTT110N10P : 110 A, 100 V, 0.018 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-268AA Specifications: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 100 volts ; rDS(on): 0.0180 ohms ; Package Type: PLASTIC, TO-268, 3 PIN ; Number of units in IC: 1

0-C     D-L     M-R     S-Z