Details, datasheet, quote on part number: HIP6006CV
PartHIP6006CV
CategoryPower Management => Desktop
DescriptionBuck And Synchronous-rectifier Pulse-width Modulator (PWM) Controller
CompanyIntersil Corporation
DatasheetDownload HIP6006CV datasheet
Cross ref.Similar parts: LM25010, LM25010-Q1, LM2727, LM2737, LM2742, LM2743, LM2744, LM2745, LM2747, LM2748
Quote
Find where to buy
 
  

 

Features, Applications

Buck and Synchronous-Rectifier Pulse-Width Modulator (PWM) Controller

The HIP6006 provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive two N Channel MOSFETs in a synchronous-rectified buck topology. The HIP6006 integrates all of the control, output adjustment, monitoring and protection functions into a single package. The output voltage of the converter can be precisely regulated to as low as 1.27V, with a maximum tolerance of ±1% over temperature and line voltage variations. The HIP6006 provides simple, single feedback loop, voltage-mode control with fast transient response. It includes a 200kHz free-running triangle-wave oscillator that is adjustable from below 50kHz to over 1MHz. The error amplifier features a 15MHz gain-bandwidth product and 6V/µs slew rate which enables high converter bandwidth for fast transient performance. The resulting PWM duty ratio ranges from to 100%. The HIP6006 protects against over-current conditions by inhibiting PWM operation. The HIP6006 monitors the current by using the rDS(ON) of the upper MOSFET which eliminates the need for a current sensing resistor.

Features

Drives Two N-Channel MOSFETs Operates From or +12V Input Simple Single-Loop Control Design - Voltage-Mode PWM Control Fast Transient Response - High-Bandwidth Error Amplifier - Full to 100% Duty Ratio Excellent Output Voltage Regulation - 1.27V Internal Reference - ±1% Over Line Voltage and Temperature Over-Current Fault Monitor - Does Not Require Extra Current Sensing Element - Uses MOSFETs rDS(ON) Small Converter Size - Constant Frequency Operation - 200kHz Free-Running Oscillator Programmable from 50kHz to Over 1MHz 14 Pin, SOIC and TSSOP Package

Applications

Power Supply for Pentium®, Pentium Pro, PowerPCTM and AlphaTM Microprocessors High-Power to 3.xV DC-DC Regulators Low-Voltage Distributed Power Supplies

RT OCSET SS COMP FB EN GND VCC 13 PVCC 12 LGATE 11 PGND 10 BOOT 9 8 UGATE PHASE

PART NUMBER HIP6006CB-T HIP6006CV-T TEMP. RANGE (oC) to 70 PACKAGE 14 Ld SOIC 14 Ld TSSOP PKG. NO. M14.15 M14.173

PowerPCTM is a trademark of IBM. AlphaTM is a trademark of Digital Equipment Corporation. Pentium® is a registered trademark of Intel Corporation.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil and Design is a trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2001, All Rights Reserved


Supply Voltage, VCC. +15.0V Boot Voltage, V BOOT - VPHASE. +15.0V Input, Output or I/O Voltage. GND -0.3V to VCC +0.3V ESD Classification.Class 2

Thermal Resistance (Typical, Note 1) JA (oC/W) SOIC Package. 85 TSSOP Package. 95 Maximum Junction Temperature. 150oC Maximum Storage Temperature Range. to 150oC Maximum Lead Temperature (Soldering 10s). 300oC (Lead tips only)

Supply Voltage, VCC. +12V ±10% Ambient Temperature Range. to 70oC Junction Temperature Range. to 125oC

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress on ly rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTE: JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.

PARAMETER VCC SUPPLY CURRENT Nominal Supply Shutdown Supply POWER-ON RESET Rising VCC Threshold Falling VCC Threshold Enable - Input threshold Voltage Rising VOCSET Threshold OSCILLATOR Free Running Frequency Total Variation Ramp Amplitude REFERENCE Reference Voltage ERROR AMPLIFIER DC Gain Gain-Bandwidth Product Slew Rate GATE DRIVERS Upper Gate Source Upper Gate Sink Lower Gate Source Lower Gate Sink PROTECTION OCSET Current Source Soft Start Current

Recommended Operating Conditions, Unless Otherwise Noted SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
VBOOT - VPHASE = 12V, VUGATE = 6V ILGATE = 0.3A VCC = 12V, VLGATE = 6V ILGATE = 0.3A

 

Related products with the same datasheet
HIP6006CB
HIP6006CB-T
HIP6006CV-T
HIP6006EVAL1
HIP6006W
Some Part number from the same manufacture Intersil Corporation
HIP6006CV-T Buck And Synchronous-rectifier Pulse-width Modulator (PWM) Controller
HIP6007 Buck Pulse-width Modulator (PWM) Controller
HIP6008 Buck Pulse-width Modulator
HIP6008CB Buck Pulse-width Modulator ( PWM ) Controller And Output Voltage Monitor
HIP6011 Buck Pulse-width Modulator
HIP6012 Buck And Synchronous-rectifier Pulse-width Modulator (PWM) Controller
HIP6013 Buck Pulse-width Modulator (PWM) Controller
HIP6014 Buck And Synchronous-rectifier
HIP6014CB Buck And Synchronous-rectifier ( PWM ) Controller And Output Voltage Monitor
HIP6015 Buck Pulse-width Modulator
HIP6015CB Buck Pulse-width Modulator ( PWM ) Controller And Output Voltage Monitor
HIP6016 Advanced PWM And Dual Linear Power Control
HIP6016CB
HIP6016CB-T
HIP6017 Advanced PWM And Dual Linear Power Control
HIP6017BCB
HIP6018
HIP6018B
HIP6018BEVAL1
HIP6018CB Advanced PWM And Dual Linear Power Control
HIP6019 Advanced Dual PWM And Dual Linear Power Control

EL5104IW-T7 : Single, 700MHz High Speed Voltage Feedback Amplifier With Enablethe EL5104, EL5105, EL5204, EL5205, And EL5304 Represent Highspeed Voltage Feedback Amplifiers Based on The Current Feedback Amplifier Architecture. This Gives The Typical High Slew Rate Benefits of a Cfa Family Along With The Sta

ISL90461WIH627Z : Single Volatile 32-Tap Digitally Controlled Potentiometer (XDCP™) The Intersil ISL90461 is a digitally controlled potentiometer (XDCP). Configured as a variable resistor, the device consists of a resistor array, wiper switches, a control section, and volatile memory. The wiper position is controll

ISL23345TFRZ-T7A : Data Acquisition - Digital Potentiometer Integrated Circuit (ics) Volatile Tape & Reel (TR) 1.2 V ~ 5.5 V, 1.7 V ~ 5.5 V; IC DGTL POT QUAD 100K 20QFN Specifications: Number of Circuits: 4 ; Resistance (Ohms): 100K ; Interface: I²C, 2-Wire Serial ; Taps: 256 ; Package / Case: 20-VFQFN Exposed Pad ; Packaging: Tape & Reel (TR) ; Voltage - Supply: 1.2 V ~ 5.5 V, 1.7 V ~ 5.5 V ; Memory Type: Volatile ; Temperature Coefficient: 45 ppm/°C

ISL31483EIBZ-T7A : Fault Protected, Extended CMR, RS-485/RS-422 Transceivers With Cable Invert The ISL3148xE are fault protected, 5V powered differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are protected

ISL61862BIRZ : Pmic - Hot Swap Integrated Circuit (ics) Hot-Swap Switch Tube Hot-Swap Switch 2.5 V ~ 5.5 V; IC USB PWR CTRLR 1.5A 8DFN Specifications: Applications: USB Overcurrent Protection Controller ; Type: Hot-Swap Switch ; Package / Case: 8-VDFN Exposed Pad ; Packaging: Tube ; Current Limit: 1.5A ; Internal Switch(s): Yes ; Operating Temperature: -40°C ~ 85°C ; Voltage - Supply: 2.5 V ~ 5.5 V ; Lead Free Status: Lead Free ; R

X40030V14-CT1 : Pmic - Supervisor Integrated Circuit (ics) Multi-Voltage Supervisor Tape & Reel (TR) 3; IC VOLTAGE MONITOR TRPL 14-TSSOP Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High ; Package / Case: 14-TSSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 3 ; Reset Timeout: Adjustable/Selectable ; Type: Multi-Voltage Supervisor ; Voltage - Threshold: 1.7V, 2.2V, 2.9V ; O

ISL26708IHZ-T : SUCCESSIVE APPROXIMATION ADC

5962R9578301VXC : 3 TIMER(S), PROGRAMMABLE TIMER, CDIP24 Specifications: Bus Interface: CMOS ; Package Type: DIP, SIDE BRAZED, METAL SEALED, CERAMIC, DIP-24 ; Supply Voltage: 4.5 to 5.5 volts ; Operating Temperature: -55 to 125 C (-67 to 257 F)

 
0-C     D-L     M-R     S-Z