Details, datasheet, quote on part number: IDT74FCT823DTEB
PartIDT74FCT823DTEB
CategoryLogic => Bus Interface
DescriptionHigh-performance CMOS Bus Interface Registers
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT74FCT823DTEB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Common features: ­ Low input and output leakage 1ľA (max.) ­ CMOS power levels ­ True TTL input and output compatibility ­ VOH = 3.3V (typ.) ­ VOL = 0.3V (typ.) ­ Meets or exceeds JEDEC standard 18 specifications ­ Product available in Radiation Tolerant and Radiation Enhanced versions ­ Military product compliant to MIL-STD-883, Class B and DESC listed (dual marked) ­ Available in DIP, SOIC, SSOP, QSOP, CERPACK and LCC packages Features for B, C and D speed grades ­ High drive outputs (-15mA IOH, 48mA IOL) ­ Power off disable outputs permit "live insertion"

The FCT82xT series is built using an advanced dual metal CMOS technology. The FCT82xT series bus interface registers are designed to eliminate the extra packages required to buffer existing registers and provide extra data width for wider address/data paths or buses carrying parity. The FCT821T are buffered, 10-bit wide versions of the popular FCT374T function. The FCT823T are 9-bit wide buffered registers with Clock Enable (EN) and Clear (CLR) ­ ideal for parity bus interfacing in high-performance microprogrammed systems. The FCT825T are 8-bit buffered registers with all the FCT823T controls plus multiple enables OE3) to allow multiuser control of the interface, e.g., CS, DMA and RD/WR. They are ideal for use as an output port requiring high IOL/IOH. The FCT82xT high-performance interface family can drive large capacitive loads, while providing low-capacitance bus loading at both inputs and outputs. All inputs have clamp diodes and all outputs are designed for low-capacitance bus loading in high-impedance state.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Description The D flip-flop data inputs. When the clear input is LOW and OE is LOW, the QI outputs are LOW. When the clear input is HIGH, data can be entered into the register. Clock Pulse for the Register; enters data into the register on the LOW-toHIGH transition. The register 3-state outputs. Clock Enable. When the clock enable is LOW, data on the D I input is transferred to the QI output on the LOW-to-HIGH clock transition. When the clock enable is HIGH, the QI outputs do not change state, regardless of the data or clock input transitions. Output Control. When the OE input is HIGH, the Y I outputs are in the highimpedance state. When the OE input is LOW, the TRUE register data is present at the YI outputs.

NOTE: H = HIGH L = LOW X = Don't Care = No Change = LOW-to-HIGH Transition Z = High Impedance

Symbol Rating Commercial (2) VTERM Terminal Voltage to +7.0 with Respect to GND VTERM(3) Terminal Voltage ­0.5 to with Respect to VCC +0.5 GND TA Operating to +70 Temperature TBIAS Temperature to +125 Under Bias TSTG Storage to +125 Temperature PT Power Dissipation 0.5 I OUT DC Output Current to +120 Military to +7.0 Unit V

Symbol Parameter(1) CIN Input Capacitance COUT Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 6 8 Max. Unit pF 12

NOTE: 1. This parameter is measured at characterization but not tested.

2567 lnk 03 NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed VCC by +0.5V unless otherwise noted. 2. Input and VCC terminals only. 3. Outputs and I/O terminals only.


 

Related products with the same datasheet
IDT74FCT823ATDB
IDT74FCT823ATE
IDT74FCT823ATEB
IDT74FCT823ATL
IDT74FCT823ATLB
IDT74FCT823ATP
IDT74FCT823ATPB
IDT74FCT823ATPY
IDT74FCT823ATPYB
IDT74FCT823ATQB
IDT74FCT823ATSOB
IDT74FCT823BTD
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT74FCT823DTL High-performance CMOS Bus Interface Registers
IDT74FCT823T High-performance CMOS Bus Interface Register
IDT74FCT824A High-performance CMOS Bus Interface Registers
IDT74FCT825A

IDT70V06L35PFI : High-speed 3.3V 128K x 8 Dual-port Static RAM

IDT2308-1HDCGI8 : 3.3V Zero Delay Clock Multiplier

ICS85322AMT : DUAL TTL/CMOS TO PECL TRANSLATOR, COMPLEMENTARY OUTPUT, PDSO8 Specifications: Logic Family: TTL, CMOS, PECL ; Package Type: SOIC, 3.90 X 4.92 MM, 1.37 MM HEIGHT, MS-012, SOIC-8 ; Propagation Delay: 2 ns ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features: RoHS

ICS95VLP857AG-130LF-T : PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO48 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, TSSOP, 0.240 INCH, 0.50 MM PITCH, MO-153, TSSOP-48 ; Supply Voltage: 2.3 to 2.7 volts ; Skew: 40 ps ; Frequency: 220 MHz ; Operating Temperature: 0.0 to 85 C (32 to 185 F)

IDT7006L55GB : 16K X 8 DUAL-PORT SRAM, 15 ns, PQFP68 Specifications: Memory Category: SRAM Chip ; Density: 131 kbits ; Number of Words: 16 k ; Bits per Word: 8 bits ; Package Type: 0.970 X 0.970 INCH, 0.080 INCH HEIGHT, GREEN, FP-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158

IDT7140SA45L52 : 1K X 8 DUAL-PORT SRAM, 100 ns, CDIP48 Specifications: Memory Category: SRAM Chip ; Density: 8 kbits ; Number of Words: 1 k ; Bits per Word: 8 bits ; Package Type: DIP, SIDE BRAZED, DIP-48 ; Pins: 48 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 100 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F)

70V24S25GI : 4K X 16 DUAL-PORT SRAM, 25 ns, CPGA84 Specifications: Memory Category: SRAM Chip ; Density: 66 kbits ; Number of Words: 4 k ; Bits per Word: 16 bits ; Package Type: 1.120 X 1.120 INCH, 0.160 INCH HEIGHT, CERAMIC, PGA-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 25 ns ; Operating Temperature: 0 to 70 C (32 to

91730AMLF : 91730 SERIES, PLL BASED CLOCK DRIVER, 1 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO8 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, SOIC, 0.150 INCH, ROHS COMPLIANT, SOIC-8 ; Supply Voltage: 3.14 to 3.46 volts ; Operating Temperature: 0.0 to 85 C (32 to 185 F) ; Features / Standards: RoHS, Lead-Free

 
0-C     D-L     M-R     S-Z