Details, datasheet, quote on part number: IDT74FCT823AD
PartIDT74FCT823AD
CategoryLogic => Bus Interface => Bus Oriented Circuits
TitleBus Oriented Circuits
DescriptionHigh Performance CMOS Bus Interface Register
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT74FCT823AD datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Low input and output leakage 1 A (max.) Extended commercial range to +85C CMOS power levels True TTL input and output compatibility VOH = 3.3V (typ.) VOL = 0.3V (typ.) Meets or exceeds JEDEC standard 18 specifications Product available in Radiation Tolerant and Radiation Enhanced versions Available in PDIP, SOIC, SSOP, and QSOP packages B, C and D speed grades High drive outputs (-15mA IOH, 48mA IOL) Power off disable outputs permit "live insertion"

The FCT823T series is built using an advanced dual metal CMOS technology. The FCT823T series bus interface registers are designed to eliminate the extra packages required to buffer existing registers and provide extra data width for wider address/data paths or buses carrying parity. The FCT823T are 9-bit wide buffered registers with Clock Enable (EN) and Clear (CLR) ideal for parity bus interfacing in high-performance microprogrammed systems. The FCT823T high-performance interface family can drive large capacitive loads, while providing low-capacitance bus loading at both inputs and outputs. All inputs have clamp diodes and all outputs are designed for lowcapacitance bus loading in high-impedance state.

Symbol VTERM(2) VTERM(3) TSTG IOUT Rating Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max. to +120 Unit C mA

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by +0.5V unless otherwise noted. 2. Inputs and Vcc terminals only. 3. Outputs and I/O terminals only.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 6 8 Max. 10 12 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Names DI CLR I/O I Description The D flip-flop data inputs. When the clear input is LOW and OE is LOW, the QI outputs are LOW. When the clear input is HIGH, data can be entered into the register. Clock Pulse for the Register; enters data into the register on the LOW-to-HIGH transition. The register 3-state outputs. Clock Enable. When the clock enable is LOW, data on the DI input is transferred to the QI output on the LOW-to-HIGH clock transition. When the clock enable is HIGH, the QI outputs do not change state, regardless of the data or clock input transitions. Output Control. When the OE input is HIGH, the YI outputs are in the high-impedance state. When the OE input is LOW, the TRUE register data is present at the YI outputs.

NOTE: H = HIGH L = LOW X = Don't Care = No Change = LOW-to-HIGH Transition Z = High-Impedance
Following Conditions Apply Unless Otherwise Specified: Commercial: to +85C, VCC 5%

Symbol VIH VIL II L IOZH IOZL II VIK VH ICC Parameter Input HIGH Level Input LOW Level Input HIGH Current(4) Input LOW Current(4) High Impedance Output Current (3-State Output Pins)(4) Input HIGH Current(4) Clamp Diode Voltage Input Hysteresis Quiescent Power Supply Current VCC = Max., VI = VCC (Max.) VCC = Min., IIN = 18mA

Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VCC = Max. = 0.5V

Symbol VOH VOL IOS IOFF Parameter Output HIGH Voltage Output LOW Voltage Short Circuit Current Input/Output Power Off Leakage(5) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL VCC = Max., = GND(3) VCC = 0V, VIN mA A Test Conditions(1) IOH = 8mA IOH = 15mA IOL = 48mA Min. 3 0.3 Max. 0.5 V Unit V

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the short circuit test should not exceed one second. 4. The test limit for this parameter 55C. 5. This parameter is guaranteed but not tested.


 

Related products with the same datasheet
IDT74FCT823AC
IDT74FCT823ADB
IDT74FCT823AE
IDT74FCT823AEB
IDT74FCT823AL
IDT74FCT823ALB
IDT74FCT823AP
IDT74FCT823APB
IDT74FCT823ASO
IDT74FCT823ASOB
IDT74FCT823AT
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT74FCT823ADB High Performance CMOS Bus Interface Register
IDT74FCT823ATD High-performance CMOS Bus Interface Registers
IDT74FCT823ATQ 9-BIT Register With Clear And 3-STATE
IDT74FCT823ATQB High-performance CMOS Bus Interface Registers
IDT74FCT823ATSO 9-BIT Register With Clear And 3-STATE
IDT74FCT823ATSOB High-performance CMOS Bus Interface Registers
IDT74FCT823B High Performance CMOS Bus Interface Register
IDT74FCT823BTD High-performance CMOS Bus Interface Registers
IDT74FCT823C High Performance CMOS Bus Interface Register
IDT74FCT823CTD High-performance CMOS Bus Interface Registers
IDT74FCT823CTQ 9-BIT Register With Clear And 3-STATE
IDT74FCT823CTQB High-performance CMOS Bus Interface Registers
IDT74FCT823CTSO 9-BIT Register With Clear And 3-STATE
IDT74FCT823CTSOB High-performance CMOS Bus Interface Registers
IDT74FCT823DT High Performance CMOS Bus Interface Register
IDT74FCT823DTD High-performance CMOS Bus Interface Registers
IDT74FCT823T High-performance CMOS Bus Interface Register
IDT74FCT824A High-performance CMOS Bus Interface Registers

IDT29FCT52BD : Fast CMOS Octal Registered Transceivers

IDT54FCT16543TEB : Bus Oriented Circuits Fast CMOS 16-bit Latched Transceiver

IDT709149S12 : Multiport->32K Synchronous Pipelined Dual-port RAM: 4kx9

IDT7205S30D : CMOS Asynchronous Fifo 2048 X 9, 4096 X 9, 8192 X 9 And 16384 X 9

IDT723656L-20 : CMOS Triple Bus Syncfifo(tm) With Bus-matching: 2,048x36x2

IDT72T51243L6BB : 4Q X18 1M Multi-Queue, 2.5V

IDT7130SA25JG : HIGH Speed 1K X 8 Dual-port Static SRAM

IDT72V3654L15PF9 : 512 X 36 BI-DIRECTIONAL FIFO, 10 ns, PQFP128 Specifications: Memory Category: FIFO ; Density: 18 kbits ; Number of Words: 512 k ; Bits per Word: 36 bits ; Package Type: TQFP, TQFP-128 ; Pins: 128 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 10 ns ; Cycle Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

54FCT16374ETEB : FCT SERIES, DUAL 8-BIT DRIVER, TRUE OUTPUT, DFP48 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: CERPACK-48 ; Pins: 48

70824L35PFI : 4K X 16 STANDARD SRAM, 35 ns, CBGA84 Specifications: Memory Category: SRAM Chip ; Density: 66 kbits ; Number of Words: 4 k ; Bits per Word: 16 bits ; Package Type: PGA-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 35 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

8536AG-02LFT : 266 MHz, OTHER CLOCK GENERATOR, PDSO24 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, TSSOP, 4.40 X 7.80 MM, 0.92 MM HEIGHT, MO-153, TSSOP-24 ; Supply Voltage: 2.38 to 2.62 volts ; Frequency: 40 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z