Details, datasheet, quote on part number: IDT74FCT541TPB
PartIDT74FCT541TPB
CategoryLogic => Line Driver/Receivers => CMOS/BiCMOS->FCT/FCT-T Family
TitleCMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS Octal Buffer/line Driver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT74FCT541TPB datasheet
  

 

Features, Applications

Std., A, and C grades Low input and output leakage 1A (max.) CMOS power levels True TTL input and output compatibility: VOH = 3.3V (typ.) VOL = 0.3V (typ.) High Drive outputs (-15mA IOH, 64mA IOL) Meets or exceeds JEDEC standard 18 specifications Military product compliant to MIL-STD-883, Class B and DESC listed (dual marked) Power off disable outputs permit "live insertion" Available in the following packages: Industrial: SOIC, SSOP, QSOP, TSSOP Military: CERDIP, LCC

The IDT octal buffer/line driver is built using an advanced dual metal CMOS technology. The FCT541T is similar in function to the FCT244T, except that the inputs and outputs are on opposite sides of the package. This pinout arrangement makes these devices especially useful as output ports for microprocessors and as backplane drivers, allowing ease of layout and greater board density.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.
CERDIP/ SOIC/ SSOP/ QSOP/ TSSOP TOP VIEW

Symbol Description Max to +120 Unit mA VTERM(2) Terminal Voltage with Respect to GND VTERM(3) Terminal Voltage with Respect to GND TSTG IOUT Storage Temperature DC Output Current

Pin Names OEA, OEB Dx Ox Inputs Outputs Description 3-State Output Enable Inputs (Active LOW)

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by +0.5V unless otherwise noted. 2. Inputs and Vcc terminals only. 3. Output and I/O terminals only.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 6 8 Max. 10 12 Unit pF

NOTE: H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High Impedance
NOTE: 1. This parameter is measured at characterization but not tested.

Following Conditions Apply Unless Otherwise Specified: Industrial: to +85C, VCC 5.0V 5%; Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL IOZH IOZL II VIK VH ICC Parameter Input HIGH Level Input LOW Level Input HIGH Current(4) Input LOW Current(4) High Impedance Output Current (3-State output pins)(4) Input HIGH Current(4) Clamp Diode Voltage Input Hysteresis Quiescent Power Supply Current VCC = Max., VI = VCC (Max.) VCC = Min, IIN = -18mA VCC = Max., VIN = GND or VCC Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VCC = Max. VCC = Max = 0.5V Min. 200 0.01 Max. mV mA Unit V A

Symbol VOH Parameter Output HIGH Voltage Test Conditions(1) VCC = Min IOH = 6mA MIL VIN = VIH or VIL IOH = 8mA IND IOH = 12mA MIL IOH = 15mA IND VCC = Min IOL = 48mA MIL VIN = VIH or VIL IOL = 64mA IND VCC = Max., = GND(3) Min. 60 Typ.(2) Max. V mA Unit V

NOTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be tested at one time. Duration of the test should not exceed one second. 4. The test limit for this parameter = 55C.


 

Related products with the same datasheet
IDT74FCT541ATD
IDT74FCT541ATDB
IDT74FCT541ATE
IDT74FCT541ATEB
IDT74FCT541ATL
IDT74FCT541ATLB
IDT74FCT541ATP
IDT74FCT541ATPB
IDT74FCT541CT
IDT74FCT541CTD
IDT74FCT541CTDB
IDT74FCT541CTE
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT74FCT541TPY Fast CMOS Octal Buffer/line Driver
IDT74FCT543 Fast CMOS Octal Latched Transceiver
IDT74FCT543ASO Octal Latched Transceiver
IDT74FCT543AT Fast CMOS Octal Latched Transceiver
IDT74FCT543ATPY Octal Latched Transceiver
IDT74FCT543C Fast CMOS Octal Latched Transceiver
IDT74FCT543CT
IDT74FCT543CTQ Octal Latched Transceiver
IDT74FCT543D Fast CMOS Octal Latched Transceiver
IDT74FCT543DTQ Octal Latched Transceiver
IDT74FCT543E Fast CMOS Octal Latched Transceiver
IDT74FCT543T
IDT74FCT573 Fast CMOS Octal Transparent Latch

79RC32V332-100DHI : 32-bit Pci Interface Supporting 2 External Bus Masters Operating up to 50 MHz Frequencies up to 150 MHz Low Cost, QFP Packaging

IDT54257TDB : Fast CMOS Quad 2-input Multiplexer

IDT54FCT162841ETPV : CMOS/BiCMOS->FCT/FCT-T Family Fast CMOS 20-bit Transparent Latch

IDT7204S25SOB : CMOS Asynchronous Fifo With Retransmit 1k X 9, 2k X 9, 4k X 9

IDT70V9199L6PF : High-speed 3.3V 64K X18/x16 Synchronous Pipelined Dual-port Static RAM

IDT89HPES16H16ZABL : Specialized Ic Integrated Circuit (ics) PCI Express Switch - Gen1 Tray; IC PCI SW 16LANE 16PORT 484FCBGA Specifications: Type: PCI Express Switch - Gen1 ; Applications: Server, Storage, Communications, Embedded, Consumer ; Package / Case: 484-BBGA, FCBGA ; Packaging: Tray ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

IDT1338-31DCGI8 : Clock/timing - Real Time Clock Integrated Circuit (ics) Clock/Calendar Tape & Reel (TR) 3.3 V ~ 5.5 V; IC SERIAL RTC I2C LP 8-SOIC Specifications: Date Format: YY-MM-DD-dd ; Time Format: HH MM SS (12/24 hr) ; Voltage - Supply: 3.3 V ~ 5.5 V ; Interface: I²C ; Memory Size: 56B ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Type: Clock/Calendar ; Operating Temperature: -40C ~ 85C ;

IDT7134SA55JI8 : Multi-Ports 4K X 8 Dual-port RAM

IDT71V424S10PHG : 2K X 8 DUAL-PORT SRAM, 25 ns, PQCC52 Specifications: Memory Category: SRAM Chip ; Density: 16 kbits ; Number of Words: 2 k ; Bits per Word: 8 bits ; Package Type: 0.750 X 0.750 INCH, 0.170 INCH HEIGHT, GREEN, PLASTIC, LCC-52 ; Pins: 52 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 25 ns ; Operating Temperature: 0 to 70 C (

502-DPK : 190 MHz, OTHER CLOCK GENERATOR, UUC Specifications: Device Type: Clock Generator ; Bus Interface: CMOS ; Package Type: Surface Mount, DIE ; Supply Voltage: 4.5 to 5.5 volts ; Frequency: 50 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

71V67803S166BGG : 512K X 18 CACHE SRAM, 4.2 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 9437 kbits ; Number of Words: 512 k ; Bits per Word: 18 bits ; Package Type: BGA, 14 X 22 MM, ROHS COMPLIANT, PLASTIC, MS-028AA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 4.2 ns ; Operating Temperature: 0 to 7

 
0-C     D-L     M-R     S-Z