Details, datasheet, quote on part number: IDT74FCT540DB
PartIDT74FCT540DB
Category
DescriptionFast CMOS Octal Buffer/line Driver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT74FCT540DB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

IDT54/74FCT240/241/244/540/541 equivalent to FASTTM speed and drive IDT54/74FCT240A/241A/244A/540A/541A 25% faster than FAST to 55% faster than FAST IOL = 64mA (commercial) and 48mA (military) CMOS power levels (1mW typ. static) Product available in Radiation Tolerant and Radiation Enhanced versions Military product compliant to MIL-STD-883, Class B Meets or exceeds JEDEC Standard 18 specifications

The IDT octal buffer/line drivers are built using an advanced dual metal CMOS technology. The IDT54/74FCT240/A/C, IDT54/74FCT241/A/C and IDT54/74FCT244/A/C are designed to be employed as memory and address drivers, clock drivers and bus-oriented transmitter/receivers which provide improved board density. The IDT54/74FCT540/A/C and IDT54/74FCT541/A/C are similar in function to the IDT54/74FCT240/A/C and IDT54/ 74FCT244/A/C, respectively, except that the inputs and outputs are on opposite sides of the package. This pinout arrangement makes these devices especially useful as output ports for microprocessors and as backplane drivers, allowing ease of layout and greater board density.

OEA OEB OB3 IDT54/74FCT241/244 *OEB for 241, OEB for 244 OEA 241 Only OEB* D7 IDT54/74FCT540/541 *Logic diagram shown for 'FCT541 is the non-inverting option.

The IDT logo is a registered trademark of Integrated Device Technology, Inc. FAST is a trademark of National Semiconductor Co.



Description 3­State Output Enable Inputs (Active LOW) 3­State Output Enable Input (Active HIGH) Inputs Outputs

NOTES: H = High Voltage Level X = Don't Care L = Low Voltage Level Z = High Impedance 2. OEB for 241 only.

Symbol Rating VTERM(2) Terminal Voltage with Respect to GND VTERM(3) Terminal Voltage with Respect to GND TA Operating Temperature TBIAS Temperature Under Bias TSTG Storage Temperature PT Power Dissipation IOUT DC Output Current Commercial Military to +7.0 Unit V

Symbol CIN COUT Parameter Input Capacitance Output Capacitance
NOTE: 1. This parameter is measured at characterization but not tested.

NOTES: 2606 tbl 01 Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed VCC by +0.5V unless otherwise noted. 2. Input and VCC terminals only. 3. Outputs and I/O terminals only.


 

Related products with the same datasheet
IDT74FCT540A
IDT74FCT540AD
IDT74FCT540ADB
IDT74FCT540AE
IDT74FCT540AEB
IDT74FCT540AL
IDT74FCT540ALB
IDT74FCT540AP
IDT74FCT540APB
IDT74FCT540ASO
IDT74FCT540ASOB
IDT74FCT540C
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT74FCT540E Fast CMOS Octal Buffer/line Driver
IDT74FCT540TD Fast Smos Octal Buffer/line Driver
IDT74FCT540TDB
IDT74FCT540TE
IDT74FCT540TEB
IDT74FCT540TL
IDT74FCT540TLB
IDT74FCT540TP
IDT74FCT540TPB
IDT74FCT540TPY
IDT74FCT540TPYB
IDT74FCT540TQ
IDT74FCT540TQB
IDT74FCT540TSOB
IDT74FCT541 Fast CMOS Octal Buffer/line Driver
IDT74FCT541ASO Octal Buffer/line Driver
IDT74FCT541AT Fast CMOS Octal Buffer/line Driver
IDT74FCT541ATPG Octal Buffer/line Driver
IDT74FCT541C Fast CMOS Octal Buffer/line Driver
IDT74FCT541CD
IDT74FCT541CT

7429FCT52BTSOB : Fast CMOS Octal Registered Transceivers

IDT54FCT574TSOB : CMOS/BiCMOS->FCT/FCT-T Family Fast CMOS Octal D Registers (3-state)

IDT7024L17G : Multi-Ports 4K X 16 Dual-port RAM

IDT74FCT162H272ETPF : CMOS/BiCMOS->FCT/FCT-T Family Fast CMOS 12-bit Synchronous Bus Exchanger

IDT74LVCHR162245APF : 3.3V CMOS Octal BUS Transceiver WITH 3-state Outputs AND 5 VOLT Tolerant I/O

IDTCV152PVG8 : Clock/timing - Application Specific Integrated Circuit (ics) PC Clock Tape & Reel (TR) 3.135 V ~ 3.465 V; IC FLEXPC CLK PROGR P4 56-SSOP Specifications: Type: PC Clock ; PLL: Yes ; Main Purpose: Intel CPU server ; Input: Crystal ; Output: Clock ; Number of Circuits: 1 ; Ratio - Input Output: 1 19 ; Differential - Input Output: No/Yes ; Frequency - Max: 400MHz ; Voltage - Supply: 3.135 V ~ 3.465 V ; Operating Temperature: 0°C ~ 70°C ;

IDT71V2546S100BG : 128K X 36 ZBT SRAM, 5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 128 k ; Bits per Word: 36 bits ; Package Type: BGA, 14 X 22 MM, PLASTIC, MS-028AA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT7207L50JG8 : 32K X 9 OTHER FIFO, 20 ns, CDIP28 Specifications: Memory Category: FIFO ; Density: 295 kbits ; Number of Words: 32 k ; Bits per Word: 9 bits ; Package Type: CERDIP-28 ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 20 ns ; Cycle Time: 30 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

M2006-02I669.3266 : PLL BASED CLOCK DRIVER, 2 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), CQCC36 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, 9 X 9 MM, CERAMIC, LCC-36 ; Supply Voltage: 3.14 to 3.46 volts ; Frequency: 700 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free

71421SA20TF : 2K X 8 DUAL-PORT SRAM, 20 ns, PQCC52 Specifications: Memory Category: SRAM Chip ; Density: 16 kbits ; Number of Words: 2 k ; Bits per Word: 8 bits ; Package Type: 0.750 X 0.750 INCH, 0.170 INCH HEIGHT, PLASTIC, LCC-52 ; Pins: 52 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 20 ns ; Operating Temperature: 0 to 70 C (32 to 158

 
0-C     D-L     M-R     S-Z