Details, datasheet, quote on part number: IDT74FCT540CTPB
CategoryLogic => Line Driver/Receivers => CMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS Octal Buffer/line Driver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT74FCT540CTPB datasheet


Features, Applications

A and C grades Low input and output leakage 1A (max.) CMOS power levels True TTL input and output compatibility: VOH = 3.3V (typ.) VOL = 0.3V (typ.) High Drive outputs (-15mA IOH, 64mA IOL) Meets or exceeds JEDEC standard 18 specifications Power off disable outputs permit "live insertion" Available in SOIC, SSOP, and QSOP packages

The IDT octal buffer/line driver is built using an advanced dual metal CMOS technology. The FCT540T is similar in function to the FCT240T, except that the inputs and outputs are on opposite sides of the package. This pinout arrangement makes these devices especially useful as output ports for microprocessors and as backplane drivers, allowing ease of layout and greater board density.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Symbol VTERM(2) VTERM(3) TSTG IOUT Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max to +120 Unit C mA

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by +0.5V unless otherwise noted. 2. Inputs and Vcc terminals only. 3. Output and I/O terminals only.

Symbol CIN Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 6 8 Max. 10 12 Unit pF COUT

NOTE: 1. This parameter is measured at characterization but not tested.
Pin Names OEA, OEB Dx Ox Inputs Outputs Description 3-State Output Enable Inputs (Active LOW)
NOTE: H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High Impedance
Following Conditions Apply Unless Otherwise Specified: Industrial: to +85C, VCC 5.0V 5%

Symbol VIH VIL IIH IIL IOZH IOZL II VIK VH ICC Parameter Input HIGH Level Input LOW Level Input HIGH Current(4) Input LOW Current(4) High Impedance Output Current(4) (3-State Output pins)(4) Input HIGH Current(4) Clamp Diode Voltage Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Max., VI = VCC (Max.) VCC = Min., IIN = 18mA Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VCC = Max. VCC = Max. = 0.5V Min. 200 0.01 Max. mV mA Unit V A

Symbol VOH VOL IOS Parameter Output HIGH Voltage Output LOW Voltage Short Circuit Current VCC = Min VIN = VIH or VIL VCC = Min VIN = VIH or VIL Test Conditions(1) IOH = 8mA IOH = 15mA IOL = 64mA Min. 60 Typ.(2) Max. 0.55 225 Unit V mA

NOTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be tested at one time. Duration of the test should not exceed one second. 4. The test limit for this parameter = 55C.


Related products with the same datasheet
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT74FCT540CTPY Fast CMOS Octal Buffer/line Driver
IDT74FCT540CTQ Octal Buffer/line Driver
IDT74FCT540D Fast CMOS Octal Buffer/line Driver
IDT74FCT540TD Fast Smos Octal Buffer/line Driver
IDT74FCT541 Fast CMOS Octal Buffer/line Driver
IDT74FCT541ASO Octal Buffer/line Driver
IDT74FCT541AT Fast CMOS Octal Buffer/line Driver
IDT74FCT541ATPG Octal Buffer/line Driver
IDT74FCT541C Fast CMOS Octal Buffer/line Driver

IDT54FCT162501ATPFB : Bus Oriented Circuits Fast CMOS 18-bit Registered Transceiver

IDT72V13071L15TFI : 2K X 8 Dual Multimedia Fifo, 3.3V

IDT74LVC86A : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage 3.3v CMOS Quadruple 2-input Exclusive-OR GATE With 5v Tolerant I/o

IDT71V67603S133PFG8 : 3.3V 256K X 36 Synchronous 3.3V I/o Pipelined SRAM

IDT7140LA55FGB : 1K X 8 DUAL-PORT SRAM, 100 ns, CDIP48 Specifications: Memory Category: SRAM Chip ; Density: 8 kbits ; Number of Words: 1 k ; Bits per Word: 8 bits ; Package Type: DIP, SIDE BRAZED, DIP-48 ; Pins: 48 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 100 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F)

IDT72265LA10TF9 : 16K X 18 OTHER FIFO, PQFP64 Specifications: Memory Category: FIFO ; Density: 295 kbits ; Number of Words: 16 k ; Bits per Word: 18 bits ; Package Type: TQFP, 14 X 14 MM, 1.40 MM HEIGHT, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 5V ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

54FCT574CTL : FCT SERIES, 8-BIT DRIVER, TRUE OUTPUT, DIP20 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: CERDIP-20 ; Pins: 20

71V124SA10TYG8 : 128K X 8 STANDARD SRAM, 10 ns, PDSO32 Specifications: Memory Category: SRAM Chip ; Density: 1049 kbits ; Number of Words: 128 k ; Bits per Word: 8 bits ; Package Type: TSOP, ROHS COMPLIANT, TSOP2-32 ; Pins: 32 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

0-C     D-L     M-R     S-Z