Details, datasheet, quote on part number: IDT74FCT540CTL
PartIDT74FCT540CTL
CategoryLogic => Line Driver/Receivers => CMOS/BiCMOS->FCT/FCT-T Family
TitleCMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS Octal Buffer/line Driver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT74FCT540CTL datasheet
Cross ref.Similar parts: 74AC11240, 74AC11244, 74AC11245, CD54AC240, CD54AC244, CD54AC374, CD54ACT245, CD54HC125, CD54HC126, CD54HCT125
  

 

Features, Applications

A and C grades Low input and output leakage 1A (max.) CMOS power levels True TTL input and output compatibility: VOH = 3.3V (typ.) VOL = 0.3V (typ.) High Drive outputs (-15mA IOH, 64mA IOL) Meets or exceeds JEDEC standard 18 specifications Power off disable outputs permit "live insertion" Available in SOIC, SSOP, and QSOP packages

The IDT octal buffer/line driver is built using an advanced dual metal CMOS technology. The FCT540T is similar in function to the FCT240T, except that the inputs and outputs are on opposite sides of the package. This pinout arrangement makes these devices especially useful as output ports for microprocessors and as backplane drivers, allowing ease of layout and greater board density.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Symbol VTERM(2) VTERM(3) TSTG IOUT Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Max to +120 Unit C mA

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by +0.5V unless otherwise noted. 2. Inputs and Vcc terminals only. 3. Output and I/O terminals only.

Symbol CIN Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 6 8 Max. 10 12 Unit pF COUT

NOTE: 1. This parameter is measured at characterization but not tested.
Pin Names OEA, OEB Dx Ox Inputs Outputs Description 3-State Output Enable Inputs (Active LOW)
NOTE: H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High Impedance
Following Conditions Apply Unless Otherwise Specified: Industrial: to +85C, VCC 5.0V 5%

Symbol VIH VIL IIH IIL IOZH IOZL II VIK VH ICC Parameter Input HIGH Level Input LOW Level Input HIGH Current(4) Input LOW Current(4) High Impedance Output Current(4) (3-State Output pins)(4) Input HIGH Current(4) Clamp Diode Voltage Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Max., VI = VCC (Max.) VCC = Min., IIN = 18mA Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VCC = Max. VCC = Max. = 0.5V Min. 200 0.01 Max. mV mA Unit V A

Symbol VOH VOL IOS Parameter Output HIGH Voltage Output LOW Voltage Short Circuit Current VCC = Min VIN = VIH or VIL VCC = Min VIN = VIH or VIL Test Conditions(1) IOH = 8mA IOH = 15mA IOL = 64mA Min. 60 Typ.(2) Max. 0.55 225 Unit V mA

NOTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be tested at one time. Duration of the test should not exceed one second. 4. The test limit for this parameter = 55C.


 

Related products with the same datasheet
IDT74FCT540ATD
IDT74FCT540ATDB
IDT74FCT540ATE
IDT74FCT540ATEB
IDT74FCT540ATL
IDT74FCT540ATLB
IDT74FCT540ATP
IDT74FCT540ATPB
IDT74FCT540ATPY
IDT74FCT540ATPYB
IDT74FCT540CT
IDT74FCT540CTD
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT74FCT540CTLB Fast CMOS Octal Buffer/line Driver
IDT74FCT540CTQ Octal Buffer/line Driver
IDT74FCT540D Fast CMOS Octal Buffer/line Driver
IDT74FCT540TD Fast Smos Octal Buffer/line Driver
IDT74FCT540TDB
IDT74FCT540TE
IDT74FCT540TEB
IDT74FCT540TL
IDT74FCT540TLB
IDT74FCT540TP
IDT74FCT540TPB
IDT74FCT540TPY
IDT74FCT540TPYB
IDT74FCT540TQ
IDT74FCT540TQB
IDT74FCT540TSOB
IDT74FCT541 Fast CMOS Octal Buffer/line Driver
IDT74FCT541ASO Octal Buffer/line Driver
IDT74FCT541AT Fast CMOS Octal Buffer/line Driver
IDT74FCT541ATPG Octal Buffer/line Driver
IDT74FCT541C Fast CMOS Octal Buffer/line Driver

5429FCT520BTQ : Fast CMOS Octal Registered Transceivers

5429FCT52CTQ : Fast CMOS Octal Registered Transceivers

IDT54FCT648DTE : Fast CMOS Octal Transceiver/ Registers ( 3-state )

IDT74FCT645ATE : Bus Oriented Circuits Fast CMOS Octal Bi-directional Transceiver

IDT7142SA20FGI : HIGH SPEED 2K X 8 DUAL PORT STATIC RAM The IDT7132/IDT7142 are high-speed 2K x 8 Dual-Port Static RAMs. The IDT7132 is designed to be used as a stand-alone 8-bit Dual-Port RAM or as a “MASTER? Dual-Port RAM together with the IDT7142 “SLAVE? Dual-Port in 16-bit-or-more word width systems.

IDT72V251L15PF8 : 3.3v CMOS Syncfifo(tm) 256x9; 512x9; 1,024x9; 2,048x9; 4,096x9 And 8,192x9

ICS375G-XX : 200 MHz, OTHER CLOCK GENERATOR, PDSO16 Specifications: Device Type: Clock Generator ; Bus Interface: CMOS ; Package Type: Surface Mount, TSSOP, TSSOP-16 ; Supply Voltage: 3.13 to 3.46 volts ; Frequency: 27 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

IDT7005L17PFG : 8K X 8 DUAL-PORT SRAM, 15 ns, PQFP68 Specifications: Memory Category: SRAM Chip ; Density: 66 kbits ; Number of Words: 8 k ; Bits per Word: 8 bits ; Package Type: QFP, 0.970 X 0.970 INCH, 0.080 INCH HEIGHT, GREEN, QFP-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to

IDT70261L55PFI : 16K X 16 DUAL-PORT SRAM, 15 ns, PQFP100 Specifications: Memory Category: SRAM Chip ; Density: 262 kbits ; Number of Words: 16 k ; Bits per Word: 16 bits ; Package Type: TQFP, 14 X 14 MM, 1.40 MM HEIGHT, TQFP-100 ; Pins: 100 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT7143LA25G : 2K X 16 MULTI-PORT SRAM, 45 ns, CQFP68 Specifications: Memory Category: SRAM Chip ; Density: 33 kbits ; Number of Words: 2 k ; Bits per Word: 16 bits ; Package Type: QFP, QFP-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 45 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

MPC962308D-2R2 : 962304 SERIES, PLL BASED CLOCK DRIVER, 4 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO8 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, SOIC, 0.150 INCH, PLASTIC, SOIC-8 ; Supply Voltage: 3 to 3.6 volts ; Skew: 200 ps ; Frequency: 133 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

70V09L20PF9 : 128K X 8 DUAL-PORT SRAM, 20 ns, PQFP100 Specifications: Memory Category: SRAM Chip ; Density: 1049 kbits ; Number of Words: 128 k ; Bits per Word: 8 bits ; Package Type: TQFP, 14 X 14 MM, 1.40 MM HEIGHT, TQFP-100 ; Pins: 100 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 20 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z