Details, datasheet, quote on part number: IDT54FCT162H245
PartIDT54FCT162H245
CategoryLogic => Transceivers => 16/32-Bit Bus Transceiver->CMOS/BiCMOS->FCT/FCT-T
Title16/32-Bit Bus Transceiver->CMOS/BiCMOS->FCT/FCT-T
DescriptionFast CMOS 16-bit Bidirectional Transceiver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162H245 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch CERPACK packages Extended commercial range to +85C Bus Hold retains last active bus state during 3-state Eliminates the need for external pull up resistors

The FCT162H245T 16-bit transceiver is built using advanced dual metal CMOS technology. These high-speed, low-power transceivers are ideal for synchronous communication between two busses (A and B). The Direction and Output Enable controls operate these devices as either two independent 8-bit transceivers or one 16-bit transceiver. The direction control pin (xDIR) controls the direction of data flow. The output enable pin (xOE) overrides the direction control and disables both ports. All inputs are designed with hysteresis for improved noise margin. The FCT162H245T has "Bus Hold" which retains the input's last state whenever the input goes to high impedance. This prevents "floating" inputs and eliminates the need for pull-up/down resistors.

Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXXT and FCT166XXXT (A-Port) O /O Output and I/O terminals. 3. Output and I/O terminals for FCT162XXXT and FCT166XXXT (A-Port).

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xOE xDIR xAx xBx Description Output Enable Input (Active LOW) Direction Control Input Side A Inputs 3-State Outputs(1) Side B Inputs 3-State Outputs(1)

NOTE: 1. These pins have "Bus Hold". All other pins are standard inputs, outputs or I/Os.
Inputs xOE L H xDIR H X Outputs Bus B Data to Bus A Bus A Data to Bus B High Z State
NOTE: H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance

Following Conditions Apply Unless Otherwise Specified: Commercial: to +85C, VCC 5.0V 10%; Military: to +125C, VCC 5.0V 10% Symbol VIH VIL IIH Parameter Input HIGH Level Input LOW Level Input HIGH Current(4) IIL Input LOW Current(4) IBHH IBHL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Bus-hold Sustain Current(4) High Impedance Output Current (3-State Output pins)(5, 6) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. Standard Input(5) Standard I/O(5) Bus-hold Input Bus-hold I/O Standard Input(5) Standard I/O(5) Bus-hold Input Bus-hold I/O Bus-hold Input VCC = Min. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. Typ.(2) Max. mV A Unit V A

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc 5.0V, +25C ambient. 3. Not more than one output should be tested at one time. Duration of the test should not exceed one second. 4. Pins with Bus-hold are identified in the pin description. 5. The test limit for this parameter 55C. 6. Does not include Bus-hold I/O pins.

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = 16mA MIL IOH = 24mA COM'L IOL = 16mA MIL IOL = 24mA COM'L

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter = -55C.


 

Related products with the same datasheet
IDT54FCT162H245ATE
IDT54FCT162H245ATEB
IDT54FCT162H245ATPA
IDT54FCT162H245ATPAB
IDT54FCT162H245ATPF
IDT54FCT162H245ATPFB
IDT54FCT162H245ATPV
IDT54FCT162H245ATPVB
IDT54FCT162H245CTE
IDT54FCT162H245CTEB
IDT54FCT162H245CTPA
IDT54FCT162H245CTPAB
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162H245AT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ATE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245CT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245CTE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245ET Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ETE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245T Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245TE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H272AT Fast CMOS 12-bit Synchronous Bus Exchanger
IDT54FCT162H501 Fast CMOS 18-bit Registered Transceiver
IDT54FCT162H501AT
IDT54FCT162H952 Fast CMOS 16-bit Registered Transceiver

IDT54FCT810CTSO : Fast CMOS Buffer/clock Driver

IDT70824S-35 : Multiport->64K Sequential Access Port 1 RAM Port 2: 4kx16

IDT7133LA-70B : Multiport->32K High Speed 2k X 16 Dual-port SRAM

IDT74FCT38074DCI : High-performance CMOS 9-bit Non-inverting Transceiver

PT7M7810S : P Supervisor Circuits The PT7M7xxx family microprocessor (P) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in P systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functio

IDT71V65602S150BG8 : ZBT (Zero Bus Turnaround) SRAM 3.3V 256K X 36 ZBT Synchronous 2.5V I/o Pipelined SRAM

IDT72V3673L10PF : 8K X 36 OTHER FIFO, 5 ns, PQFP128 Specifications: Memory Category: FIFO ; Density: 295 kbits ; Number of Words: 8 k ; Bits per Word: 36 bits ; Package Type: TQFP, PLASTIC, TQFP-128 ; Pins: 128 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 5 ns ; Cycle Time: 7.5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

7006L20JGI8 : 16K X 8 DUAL-PORT SRAM, 20 ns, PQCC68 Specifications: Memory Category: SRAM Chip ; Density: 131 kbits ; Number of Words: 16 k ; Bits per Word: 8 bits ; Package Type: 0.950 X 0.950 INCH, 0.170 INCH HEIGHT, PLASTIC, LCC-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 20 ns ; Operating Temperature: 0 to 70 C (32 to 1

70RC32T365-150BCI : 32-BIT, 75 MHz, RISC PROCESSOR, PBGA256 Specifications: Architecture: RISC ; Data Bus: 32-Bit ; Supply Voltage: 2.5V ; Package Type: Other, 17 X 17 MM, CABGA-256 ; Pin Count: 256 ; Clock Speed: 75 MHz ; Operating Temperature: 0 to 70 C (32 to 158 F)

7133SA70FB : 2K X 16 DUAL-PORT SRAM, 70 ns, CQFP68 Specifications: Memory Category: SRAM Chip ; Density: 33 kbits ; Number of Words: 2 k ; Bits per Word: 16 bits ; Package Type: 1.180 X 1.180 INCH, 0.160 INCH HEIGHT, FP-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 70 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

71V67603133PFG : 256K X 36 CACHE SRAM, 4.2 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 9437 kbits ; Number of Words: 256 k ; Bits per Word: 36 bits ; Package Type: BGA, 14 X 22 MM, ROHS COMPLIANT, PLASTIC, MS-028AA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 4.2 ns ; Operating Temperature: 0 to 7

Same catergory

74HC27 : 74HC/HCT27; Triple 3-input NOR GATE;; Package: SOT108-1 (SO14), SOT27-1 (DIP14), SOT337-1 (SSOP14), SOT402-1 (TSSOP14).

74LCX16244 : LCX->Low Voltage HCMOS, 5V I/O Tolerant. Low Voltage CMOS 16-BIT Buffer (3-STATE) With 5V Tolerant Inputs And Outputs.

84088012A : D-Type Flip-Flops. ti SN54HC112, Dual J-k Negative-edge-triggered Flip-flops With Clear And Preset.

93L28 : Bipolar->TTL Family. Dual 8-bit Shift Register. The is a high speed serial storage element providing 16 bits of storage in the form of two 8-bit registers The multifunctional capability of this device is provided by several 1) additional gating is provided at the input to both shift registers so that the input is easily multiplexed between two sources 2) the clock of each register may be provided.

CD54AC1643A : 8-bit Serial-in/parallel-out Shift Registers. The CD54AC164/3A and CD54ACT164/3A are 8-bit serialin/parallel-out shift registers with asynchronous reset that utilize the Harris Advanced CMOS Logic technology. Data are shifted on the positive edge of the clock (CP). A LOW on the Master Reset (MR) pin resets the shift register and all outputs go to the LOW state regardless of the input conditions.

CD54ACT86F3A : ti CD54ACT86, Quad 2-Input Exclusive-OR GATEs. Inputs Are TTL-Voltage Compatible Speed of Bipolar F, AS, and S, With Significantly Reduced Power Consumption Balanced Propagation Delays 24-mA Output Drive Current Fanout 15 F Devices SCR-Latchup-Resistant CMOS Process and Circuit Design Exceeds 2-kV ESD Protection Per MIL-STD-883, Method 3015 The 'ACT86 devices are quadruple 2-input exclusive-OR.

CD74HC154E : Decoders. ti CD74HC154, High Speed CMOS Logic 4-to-16 Line Decoder/demultiplexer.

MC68824 : Token-passing Bus Controller ( TBC ).

SK100EL01W : 4-Input or / Nor. The OR / NOR gate device. This device is fully compatible with MC10/100EL01 and MC10/100LVEL01. With output transition and propagation delay much faster than the E101, the EL01W is ideally suited for those applications which require ultimate AC performance. Extended Supply Voltage Range: (VEE to 3.0V, VCC 0V) or (VCC +5.5V, VEE=0V) High Bandwidth Output.

SN54ABT623AFK : Octal Bus Transceivers With 3-state Outputs. State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) V at VCC = 25C High-Drive Outputs (32-mA IOH, 64-mA IOL) Package.

SN54ALS805A : Hex 2-input Nor Drivers. High Capacitive-Drive Capability ALS805A Has Typical Delay Time 4.2 ns (CL = 50 pF) and Typical Power Dissipation 4.2 mW Per Gate AS805B Has Typical Delay Time 2.6 ns (CL = 50 pF) and Typical Power Dissipation 12 mW Per Gate Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic.

SN74ABT853DB : 8-bit to 9-bit Parity Bus Transceivers. State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 500 mA Per JESD 17 Typical VOLP (Output Ground Bounce) V at VCC = 25C High-Drive Outputs (32-mA IOH, 64-mA IOL) High-Impedance State.

SN74LS642-1DW : Standard Transceivers. ti SN74LS642, Octal Bus Transceivers With Open Collector Outputs.

TC74AC164FN : TC74AC Series. Function = 8-bit Sipo Shift Register ;; Pins = 14.

TC74LCX157FN : TC74LCX Series. Function = Quad 2-channel Multiplex ;; Pins = 16 ;; Additional Information = More Info.

SC28L201 : 3.3 V, 5 V UART, 3.125 Mbit/s, with 256-byte FIFO The SC28L201 is a high performance UART. Its functional and programming closely match but greatly extend those of previous Philips UARTs. Its configuration on power-up is similar that of the SC26C92. Its differences from the previous Philips UARTs are: 256-character receiver, 256-character transmit FIFOs,.

MC1021FN : 10K SERIES, 11-INPUT OR-AND/OR-AND-INVERT GATE, PQCC20. s: Gate Type: NOT, AND, OR ; Logic Family: ECL ; Inputs: 11 ; Propagation Delay: 3.5 ns ; Operating Temperature: -30 to 85 C (-22 to 185 F) ; Pin Count: 20 ; IC Package Type: Other, PLASTIC, LCC-20.

XC2V2000-4BG957C : FPGA, 2688 CLBS, 2000000 GATES, 650 MHz, PBGA957. s: System Gates: 2.00E6 ; Logic Cells / Logic Blocks: 2688 ; Package Type: Other, FLIP CHIP, BGA-957 ; Logic Family: CMOS ; Pins: 957 ; Internal Frequency: 650 MHz ; Operating Temperature: 0 to 85 C (32 to 185 F) ; Propagation Delay: 0.4400 ns ; Supply Voltage: 1.5V.

935208700118 : ABT SERIES, QUAD 2-INPUT OR GATE, PDSO14. s: Gate Type: OR ; Supply Voltage: 5V ; Logic Family: BICMOS ; Inputs: 2 ; Propagation Delay: 3.8 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Pin Count: 14 ; IC Package Type: Other, 3.90 MM, PLASTIC, MS-012AB, SOT-108-1, SO-14.

 
0-C     D-L     M-R     S-Z