Details, datasheet, quote on part number: IDT54FCT162H244ATEB
PartIDT54FCT162H244ATEB
CategoryLogic => Line Driver/Receivers => CMOS/BiCMOS->FCT/FCT-T Family
TitleCMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS 16-bit Buffer/line Driver
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT162H244ATEB datasheet
Cross ref.Similar parts: SN54ABT162244, SN54ABT16241A, SN54ABT16244
Quote
Find where to buy
 
  

 

Features, Applications

MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tSK(o) (Output Skew) < 250ps Low input and output leakage 1 A (max.) ESD > 2000V per MIL-STD-883, Method > 200V using machine model 0) 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch CERPACK packages Extended commercial range to +85C Bus-Hold retains last active bus state during 3-state Eliminates the need for external pull up resistors

The FCT162H244T/AT/CT/ET 16-Bit Buffer/Line Driver is for bus interface or signal buffering applications requiring high speed and low power dissipation. These devices have a flow through pin organization, and shrink packaging to simplify board layout. All inputs are designed with hysteresis for improved noise margin. The three-state controls allow independent 8bit or combined 16-bit operation. These parts are plug in replacements for 54/ 74ABT16244 where higher speed, lower noise or lower power dissipation levels are desired. The FCT162H244T/AT/CT/ET has "Bus-Hold" which retains the input's last state whenever the input goes to high impedance. This prevents "floating" inputs and eliminates the need for pull-up/down resistors.


Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXXT Output and I/O terminals. 3. Output and I/O terminals for FCT162XXXT. FCT162XXXT and FCT166XXXT.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 Max. 6 8 Unit pF

NOTE: 1. This parameter is measured at characterization but not tested.

Pin Names xOE xAx xYx Description 3State Output Enable Inputs (Active LOW) Data Inputs(1) 3-State Outputs

NOTE: 1. These pins have "Bus-hold". All other pins are standard inputs, outputs, or I/Os.
NOTE: H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High-Impedance

Following Conditions Apply Unless Otherwise Specified: Commercial: to +85C, VCC 5.0V 10%; Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH Parameter Input HIGH Level Input LOW Level Input HIGH Current(4) IIL Input LOW Current(4) IBHH IBHL IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Bus-hold Sustain Current(4) High Impedance Output Current (3-State Output pins)(5, 6) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current VCC = Max. VIN = GND or VCC = Min., IIN = 18mA VCC = Max., = GND(3) VCC = Max. Standard Input(5) Standard I/O(5) Bus-hold Input Bus-hold I/O Standard Input(5) Standard I/O(5) Bus-hold Input Bus-hold I/O Bus-hold Input VCC = Min. VI = GND Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC Min. Typ.(2) Max. mV A Unit V A

Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = 5V, VIN = VIH or VIL, = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = 6mA MIL IOH = 8mA COM'L IOL = 6mA MIL IOL = 8mA COM'L 0.55 V Min. 48 3.3 Max. 96 96 Unit mA V

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter -55C. 6. Does not include Bus-Hold I/O pins.


 

Related products with the same datasheet
IDT54FCT162H244ATE
IDT54FCT162H244ATPA
IDT54FCT162H244ATPAB
IDT54FCT162H244ATPF
IDT54FCT162H244ATPFB
IDT54FCT162H244ATPV
IDT54FCT162H244ATPVB
IDT54FCT162H244CTE
IDT54FCT162H244CTEB
IDT54FCT162H244CTPA
IDT54FCT162H244CTPAB
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT162H244ATPA Fast CMOS 16-bit Buffer/line Driver
IDT54FCT162H244CT
IDT54FCT162H244CTE
IDT54FCT162H244ET
IDT54FCT162H244ETE
IDT54FCT162H244T
IDT54FCT162H244TE
IDT54FCT162H245 Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245AT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ATE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245CT Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245CTE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245ET Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245ETE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H245T Fast CMOS 16-bit Bidirectional Transceivers
IDT54FCT162H245TE Fast CMOS 16-bit Bidirectional Transceiver
IDT54FCT162H272AT Fast CMOS 12-bit Synchronous Bus Exchanger
IDT54FCT162H501 Fast CMOS 18-bit Registered Transceiver
IDT54FCT162H501AT

IDT54240ATPB : Fast CMOS Octal Buffer/line Drivers

IDT54FCT543ATSO : Bus Oriented Circuits Fast CMOS Octal Latched Transceiver

ICS9LPRS355BGLF : Clock/timing - Application Specific Integrated Circuit (ics) Clock/Frequency Synthesizer Tube 2.5 V ~ 3.3 V; IC CLK SYNTHESIZER CK505 64TSSOP Specifications: Type: Clock/Frequency Synthesizer ; PLL: No ; Main Purpose: Intel CPU, PCI Express (PCIe) ; Input: Crystal ; Output: Clock ; Number of Circuits: 1 ; Ratio - Input Output: - ; Differential - Input Output: - ; Frequency - Max: - ; Voltage - Supply: 2.5 V ~ 3.3 V ; Operating Temperature

IDT2308A-5HPGG8 : Clock/timing - Clock Generators, Plls, Frequency Synthesizer Integrated Circuit (ics) Multiplier, Zero Delay Buffer Tape & Reel (TR) 3 V ~ 3.6 V; IC CLOCK MULT ZD HI DRV 16-TSSOP Specifications: Type: Multiplier, Zero Delay Buffer ; PLL: Yes with Bypass ; Input: LVTTL ; Output: LVTTL ; Frequency - Max: 133MHz ; Number of Circuits: 1 ; Ratio - Input Output: 1 8 ; Differential - Input Output: No/No ; Divider/Multiplier: - ; Voltage - Supply: 3 V ~ 3.6 V ; Operating Temperature

IDT2305NZ-1HDCG : 2305 SERIES, PLL BASED CLOCK DRIVER, 5 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO8 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, SOIC, SOIC-8 ; Supply Voltage: 3 to 3.6 volts ; Skew: 250 ps ; Frequency: 133 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

IDT723612L30PFT/R : 64 X 36 OTHER FIFO, 10 ns, PQFP120 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 64 k ; Bits per Word: 36 bits ; Package Type: TQFP, TQFP-120 ; Pins: 120 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 10 ns ; Cycle Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT74FCT810CTD : FCT SERIES, LOW SKEW CLOCK DRIVER, 5 TRUE OUTPUT(S), 5 INVERTED OUTPUT(S), CDIP20 Specifications: Device Type: Clock Driver ; Bus Interface: CMOS ; Package Type: CERDIP-20 ; Supply Voltage: 4.75 to 5.25 volts ; Skew: 700 ps ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free

70P3519S166BCGI : 256K X 36 DUAL-PORT SRAM, 12 ns, PBGA256 Specifications: Memory Category: SRAM Chip ; Density: 9437 kbits ; Number of Words: 256 k ; Bits per Word: 36 bits ; Package Type: 17 X 17 MM, 1.50 MM HEIGHT, 1 MM PITCH, GREEN, FBGA-256 ; Pins: 256 ; Supply Voltage: 1.8V ; Access Time: 12 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

71V3557S80PFGI : IC,SYNC SRAM,128KX36,CMOS,BGA,119PIN,PLASTIC Specifications: Memory Category: SRAM Chip

 
0-C     D-L     M-R     S-Z